Laserfiche WebLink
CITY OF SANTA ANA <br />RFP NO.: 17-087 <br />WATER SYSTEM CONTROL DESIGN, PROGRAMMING AND SUPPORT SERVICES <br />and new components, such as control/PLC panels, with clear indication of new versus existing <br />Bill of Materials of any new PLC modules of components required by the design project <br />Control/PLC Panel Wiring Diagrams — Show all new and modified wiring required in the control <br />panel, including wire numbers and colors, terminal numbers, and component tag numbers and/or <br />description names. Include the panel end of field wires that terminate in the control panel for use <br />by the electrical contractor that is responsible for pulling and terminating field wires into the <br />control/PLC cabinets. <br />Updated UO list with existing and new point locations and addresses. <br />PROGRAMMING <br />The Consultant shall be responsible to provide on-call control system programming in ladder logic, function <br />blocks, and structured text in the following programming languages: <br />Concept v 2.6 <br />Unity <br />Vijeo Designer <br />Visilogio <br />The Consultant shall also be familiar with programming ABB VFD drives, PID loop controls programming (to <br />be programmed in the PLC, not the VFD), and other related duties as assigned, All programming activities <br />shall be documented, appropriately annotated within the coding and coordinated/approved with/by the City's <br />designated change manager. <br />As a part of any programming task, the Consultant shall be expected to perform any or all of the following: <br />• Develop loop diagrams for all I/O connections to the PLC showing connections between the PLC Panel <br />and the remote instruments or equipment, <br />• Prepare a software submittal. <br />• Include new conununication to VFD's,power monitors, and equipment control panels. <br />• Develop Factory and Site Acceptance testing plans to be submitted to the City for review and approval. <br />• Execute the test plan to the satisfaction of the City. <br />• Perform PLC I/O software functional testing, <br />• Provide a software operations and maintenance manual covering the developed software. <br />• Prepare record drawings. <br />• Perform planning, monitoring, configuration, troubleshooting, backup and repair of control system <br />hardware and/or software. <br />TROUBLESHOOTING REPAIR AND MAINTENANCE: <br />Consultant shall conduct troubleshooting and repair of electrical control systems, instrumentation equipment, <br />communication gaps, and software as required to keep the SCADA control systems in proper working order. <br />Consultant shall inform or make recommendations to City of all applicable software updates, licenses, or <br />programming that would benefit or improve the City's SCADA control systems. With City approval, <br />Consultant shall install the recommended software/hardware upgrades or make modifications as necessary and <br />agreed upon to improve the systems as described. <br />Page 2of3 <br />