25A - AGMT IRRIGATION CONTROL - Laserfiche WebLink

Home Browse Search

B. High Voltage Wiring: Install 120 -volt power codes and ordinances contractor. 3.11 COMMUNICATION CABLE from power source to automatic controller unit following local governing . All 120VAC power wiring shall be completed by a licensed electrical A. Install communication cable according to manufacturer's specifications. B. Splices in communication cable are only allowed at the following locations: 1. Within each field satellite unit. 2. At the end of each entire length of communication cable line. 3. At the communication hub unit. C. Install communication cable splices occurring at the end of each entire length in their own separate valve box utilizing manufacturer approved splice connectors. PART 4—SYSTEM INSTALLATION OBSERVATION 4.0 QUALITY CONTROL A. Pre -construction Meeting: The contractor is responsible for contacting The City of Santa Ana authorized representative prior to beginning construction and/or ordering materials to establish a meeting to review and discuss project objectives, concerns and to review the construction documents to insure a complete understanding of required installation procedures. B. General Observation: The architect along with The City of Santa Ana authorized representative will visit the construction site at interim times during the construction process to access construction progress regarding installation of irrigation conduit and related equipment to be in compliance with the drawings, details, specifications and site conditions. The architect will prepare a site report after each visit noting progress of installation, verbal communication with the contractor and identify any field adjustments necessary which require modifications. A copy of this site report will be delivered to both The City of Santa Ana and the contractor. The contractor is responsible to immediately address each item on the site report before proceeding with further construction. C. Maintain a set of current and up to date plans on the job site at all times. No site observation will commence without as -built drawings and current plans. In the event the contractor calls for a site visit without as -built drawings, without current plans, without completing previously noted corrections, or without preparing the system for said visit, he shall be responsible for reimbursing the Architect at his current hourly billing rate, portal to portal, for the inconvenience. No further site visits will be scheduled until payment of this charge has been received. D. Walk Through for walk through for substantial completion: 1. Before requesting a walk through for substantial completion the following requirements must be entirely satisfied: 2. All valve boxes have been branded. 3. All automatic controllers/field satellite units are fully operable and communication has been certified and checked at the central control system. 4. Record as -built drawings have been submitted to The City of Santa Ana authorized representative for review as to completeness.