55A - RESO SCE STREET LIGHTS - Laserfiche WebLink

Home Browse Search

EDISON Southern California Edison Revised Cal. PUC Sheet No. 51812-E Rosemead, California (U 338-E) Cancelling Revised Cal. PUC Sheet No. 45428-E Schedule LS -2 Sheet 14 LIGHTING - STREET AND HIGHWAY CUSTOMER -OWNED INSTALLATION - UNMETERED SERVICE (Continued) SPECIAL CONDITIONS (Continued) 13. Charges for Nonstandard Lamps: Nonstandard Lamps are lamps for which a monthly charge is not listed in this Schedule. Where a lamp is not listed in this Schedule, the monthly charge is computed by first computing the applicable kWh for the lamp. The kWhs are computed by applying the method provided in Special Condition 12 for Other Lamps. Where manufacturer's information is not available for rated wattage consumption, the customer must provide third party documentation before SCE will accept lamps for this Schedule. The Energy Charge is calculated using the rates shown in the RATES section, above. The total monthly lamp charge for nonstandard lamps is the sum of the monthly lamp charge as shown in the RATES section for all other lamps, plus the Energy Charge. For Series Service Lamps, the Energy Charge is adjusted for Voltage Discount, and the total lamp charge increased for Series Service Power Factor. 14. Energy Efficient Street Lights — Where Customers permanently install energy efficient streetlights under the terms of this Schedule and the total energy use cannot be verified through industry standards or other documentation acceptable to SCE, the customer may be required to provide verifiable documentation to SCE's satisfaction regarding the total energy consumption of the lamp and driver. All fixtures that include the capability of adjustable light wattage settings will be billed at the maximum wattage setting. 15. Limited testing of emerging Streetlight technologies will be allowed under this Schedule. Such test installations are subject to approval by SCE. Testing is limited to existing streetlight fixtures and the total energy consumption per fixture must not exceed current energy use per fixture. Additional energy efficient streetlight fixtures installed will also be subject to billing under the current rate upon the approval of SCE. The test period will not exceed 12 months. 16. Series Service Power Factor: The kVAR losses for the Series Service Power Factor charge shall be calculated by multiplying the applicable series service kW lamp load from Special Condition 10 by the applicable kVAR demand loss factor shown below: kVAR Demand Loss Factor (kVAR Loss/kW load) High Pressure Low Pressure Incandescent Mercury Vapor Sodium Vapor Sodium Vapor 2.133 2.953 5.270 7.067 17. Voltage Discount: Bundled Service, CCA Service, and Direct Access customers will have the Distribution rate component of the applicable Delivery Charges reduced by the corresponding Voltage Discount amount for service metered and delivered at the applicable voltage level as shown in the RATES section above. In addition, Bundled Service Customers will have the Utility Generation (UG) rate component of the applicable Generation charges reduced by the corresponding Voltage Discount amount for service metered and delivered at the applicable voltage level as shown in the RATES section. (To be inserted by utility) Advice 2861-E Decision 14CII Issued by AkbarJazaveri Vice President 55A-80 (T) (To be inserted by Cal. PUC) Date Filed Mar 13, 2013 Effective Apr 12, 2013 Resolution