Laserfiche WebLink
STATE OF CALIFORNIA <br />ENERGY MANAGEMENT CONTROL SYSTEM OR LIGHTING CONTROL SYSTEM <br />CEGNRCI.LTI{2 E CALIF Y COMMISSION <br />PARI2 LlthtlnS Control Functlon.l r.qulrcm.nts: Ch.cl o,, thdt owly wh.n vetMng tha lnstolhtlon oron EMCS ot <br />Llghtln' Confuol Syt.tm. <br />[f/l ltt tlgnting controls and equipment have been installed in accordance with the manufacturer's instructions. <br />$fB. the manufacturer has provided instructions for calibration. <br />E C. tf indicator liShts are integral to any components, such indicator lights consumes no more than 1 watt ol <br />power per indicator light. <br />E D. Components that are retulated by the Title 20 Appliance Efficiency ReSulations have been certifi€d to the <br />Ener8y Commission. <br />EI f. the fUCS or LiShtinS Control System tunctions as one or more of the Time.switch Lightihg Controls checked <br />below, and complies with all ol the followinS requirements: <br />1. Automatic Time-Switch Controls meeting all requirements for Automatic Time Switch Control devices in <br />the Title 20 Appliance Efficiency Regulations, including the requirements below: <br />a. Residential auto matic time-switch controls have program backup capabilities that prevent the <br />loss of the device's schedule for at least 7 days, and the device's date and time for at least 72 <br />hours if power is interrupted. <br />b. Commercial automatic time-switch controls meet the following requirements: <br />(D <br />t <br />Has program backup capabilities that prevent the loss of the device's schedule for at Ieast <br />7 days, and the device's date and time for at least 72 hours if power is interrupted; <br />ls capable of providinS manual override to each conneded load ahd shall resume normally <br />scheduled operation after manual override is initiated within 2 hours for each connected <br />load; and <br />lncorporates an automatic holiday shutoff feature that turns off all conneded loads for at <br />least 24 hours and then resumes normally scheduled operation. <br />2. AstronomicalTime-Swltch Controls meeting all req uirements for Astronomical Time-Switch Control <br />devices in the Title 20 Appliance Efficiency ReSulations, including the requirements below: <br />a. Meets the requirements of an automatic time-switch control; <br />b. Has sunris€ and suns€t prediction accuracy within plus-or-minus 15 minutes and timekeepinS <br />accuracy within 5 minutes per year; <br />c. ls capable of displaying date, cu.rent time, sunrise time, sunset time, and switching times for <br />each step during programminB; <br />d. Has an automatic daylight savinSs time adjustment; and <br />e. Has the ability to independently offset the on and off for each channel by at least 99 minutes <br />before and after sunrise or sunset. <br />tr 3. Multi-LevelAstronomicalTime-switch Controls, in addition to meetingallofthe requirementsfor <br />Astronomical Time-Switch Controls, includes at least 2 separately programmable steps per zone. <br />CERTIFICATE OF INSTAI.LATION NRCt-tTr-02-E <br />Enerty Management Control System or LiShtinS Control System (Page 2 of 6) <br />4,-n*l,*-*i-_, c14:7 <E_Crl LJ 2j-c*4.i,d6 7>! Ny. Oaf;qm<l-r Sdf ---f+.--q7--1'/\ I <br />CA BuildinS EnerSy Efficiency Standards, 2013 Non16idential Compliance December 2015 <br />E f. fte EUCS or Lighting Control System functions as one or more ol the DayliEhting Controls listed below: <br />d