Laserfiche WebLink
,,-SANTA <br />NA-"'iffi <br />Pl.nning & Bullding Agency <br />Bullding Safety Divlslon <br />20 Clvlc C.ntsr Plaza <br />P.O. Box 1988 (M-19) <br />Sant Ana, CA 92702 <br />(714) 647-s800 <br />www.santa.ana.org <br />RESIDENTIAL <br />PHOTOVOLTAIC <br />CHECKLIST <br />sol-01 cBc 2013 <br />Solar Photovoltalc (PV) Checktist for Detached STNGLE FAMtLy RESTDENCES Onty <br />lnstructlons: The licensed contractor of record shall complele all sections, answer the ten questions and <br />sign the certification section below. A copy of this form shall be attachsd to each of TWO sets of plans, of <br />minimum 11" x 17" size. lf answsrin NO to anv of the ou ons. Dlan check shall be required. <br />Projecl Address: 5420 W FLIGHT AVE' SANTA ANA, CA 92704 <br />contractor comp"ny Hame: -XOUTHWES <br />Contractor Licens" <br />"r.*., <br />4 <br />5 <br />2 <br />3 <br />6 <br />7 <br />YES NO <br />a tr <br />Eltr <br />ExD <br />tstr <br />Etr <br />trtr <br />Eltr <br />8 Etr <br />Ettr <br />Are tho followlng appllcable to the proposod project? <br />Will lhe PV system layout provide the rsquired threa-foot wide clear accass pathways <br />per Section 605.11 of ths Califomia Fire Code, and is this shown on the roof plan? <br />Will the PV system be installed on a roof having only one roofing layer with no <br />overlays? <br />Will the PV anay be flush mounted to lhe exisling roof so that lhe plane of the <br />modules (panels) are parallel to the plan6 of the roof? <br />Will the PV system weigh maximum 4 pounds per square feet or less? <br />Will the PV system be installed where the modulos do not overhang any roof edges <br />(such as eaves, gabled ends, ridges and hips)? <br />Will the PV system be installed with a space of 2" minimum to 10" maximum between <br />the underside oI modules and the surfacs of the roof? <br />Will the PV system be installed without using any ballast system or counter-weight <br />system? <br />Will the anchors be installed with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will the minimum 5/16" lag screws be installed with a minlmum of Z-112 i^ch <br />embedmBnt into roof raflsrs (wilh pre-drilled holes) and is this minimum embedment <br />shown on the plans? <br />Are ALL the structural pages of the plans WET stamped and signed by a California <br />licensed professional engineer? (including project specific site plan, pV layout, <br />anchorage spacing, anchorage details and manufacturs/s pV support information.) <br />9 <br />'t0 Etr <br />I cerllfy under penalty of periury under the laws of the State of Cal <br />prlr1 Nsms. TRANG CONG PHAM <br />phons Number: 714 5823909 <br />Signature: <br />Oale: <br />Rev:8,r1712015 <br />ia that abovo is true: <br />sm3;1 4661s5s. PERMIT@SOUTHWESTSUNSOLAR.COM