|
November 14, 2012 SIGN COMPONENTS MANUAL (SAM)124
<br />B, "Replace only with , Type ." (Blanks to be replaced by Applicant's Company name and material type or designation.)
<br />SS LIGHT CO LTD
<br />7 SINPUNG-DONG PALDAL-GU
<br />E346996
<br />SUWON-SI, GYEONGGI-DO 442-040 REPUBLIC OF KOREA
<br />Class 2 LED Modules, 1<PL, PPL, DPL, OSPL, CPL, OCPL, KPLO/V), DPL(W), OSPL(V\0, KR3, KB3, KG3, KY3, DR3, DB3, DG3,
<br />DY3, KTW3, KTB), KTR3, DTV\/3, DTB3, DTR3, WPL, WPLO/V), WR3, WB3, WG3, WSPL, NSR3, NSG3, NSB3, NSR3, FPL,
<br />KGL, DGL, KR2, K82, KG2, DR2, 082, DG2, DDL, KDLO/\0, DDL(V\4, KRD2, KBD2, KGD2, KYD2, DRD2, DBD2, DGD2, DYD2,
<br />OSDL(W), OSGL, OSDL, KPL4, DPL4, KPL40, DPL40, KPL40(V\0, DPL40(VV), OSPL40, OSPL40(\AD, OSPL4, FPL40, KOL, DOL,
<br />KOR, DORI KOB, DOB, KOG, DOG, DRGB3, WRGB3, WSRGB3, KRGBi KSL, DSL, SSL, KSL(V\0, DSL(W), KR -1, KB 1, KGE
<br />DRL 081, DG1, NSR, NSG, NSB, DRGB2, SRGE32, KRGBD, DRGBD, SRGBD, KRGB2, KRGB40, DRGB40, SRG[340, KPLE
<br />DPL6, OSPL6.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuit and is rated greater than 12V DC.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />Marking: Company name or trademark SS LIGHT
<br />and product designation.
<br />STARTEC CO LTD E350879
<br />310-8 YUHYUN-RI
<br />YANGCHON-MYEON
<br />GIMPO-SI, GYEONGGI-DO 415-821 REPUBLIC OF KOREA
<br />Class 2 LEDs, Model R03-25KN.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />3. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />4. These products are not required to be enclosed or protected from the weather in the end product.
<br />5. These products may be secured in place in the end product by any means available.
<br />SUPER BRIGHT LEDS INC
<br />4400 EARTH CITY EXPY
<br />EARTH CITY, MO 63045
<br />E357849
<br />LED Lighting Modules, Cat. Nos. LB4-x6, LBM-x2, LBM-x4, where "x" can be any alphanumeric combination.
<br />1. These products are only suitable for connection to the output of a UL Listed or R/C (UYMR2), Component - Sign Accessory
<br />Class 2 LED power supply or UL Listed or FUC Class 2 Power Supply rated 12VDC.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />requirements.
<br />3. These products are rated per the Table below. When units are connected to a Class 2 circuit, their number is to be limited to
<br />draw a total wattage of no greater than the secondary current rating of each Class 2 power supply.
<br />4. These products are suitable for use in dry, damp and wet locations without additional enclosures.
<br />LED Lighting Modules, Cat. Nos. SWFLS-x60, SNFLS-x30, where "x" can be any alphanumeric combination.
<br />1. These products are only suitable for connection to the output of a UL Listed or R/C Class 2 Power Supply rated 12VDC.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />requirements.
<br />3. These products are rated per the Table on Page 2. When units are connected to a Class 2 circuit, their number is to be limited
<br />to draw a total wattage of no greater than the secondary current rating of each Class 2 power supply.
<br />4. These products are suitable for use in dry, damp and wet locations without additional enclosures.
<br />LED Lighting Modules, Cat. Nos. LBM-x3SMD, LSM-)(3X1 LSMCC-xl X3-LP, LSMCC-*3X3-LP[@], LSMCC-x4)<3-LP[@], where
<br />"x" can be any alphanumeric combination.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuit and is rated greater than 15V DC.
<br />3. These products are each rated max. 1.5 watts per module. When units are connected to a Class 2 circuit, they are not to draw a
<br />total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />SUPER X MFG LTD
<br />UNIT 1001
<br />FOOK LEE COMMERCIAL CENTRE
<br />33 LOCKHART RD
<br />E347032
|