|
ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed
<br />as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as
<br />to any finding or other matter in this report, or as to any product covered by the report.
<br />Copyright © 2022 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 21
<br />www.icc-es.org | (800) 423-6587 | (562) 699-0543 A Subsidiary of the International Code Council ®
<br />ICC-ES Evaluation Report Reissued December 2022
<br />ESR-1308 This report is subject to renewal December 2023.
<br />DIVISION: 09 00 00—FINISHES
<br />Section: 09 22 26—Suspension Systems
<br />Section: 09 53 00—Acoustical Ceiling Suspension
<br />Assemblies
<br />REPORT HOLDER:
<br />WORTHINGTON ARMSTRONG VENTURE (WAVE)
<br />EVALUATION SUBJECT:
<br />FIRE- AND NONFIRE-RESISTANCE-RATED
<br />SUSPENDED CEILING FRAMING SYSTEMS
<br />ADDITIONAL LISTEE:
<br />ARMSTRONG WORLD INDUSTRIES, INC.
<br />1.0 EVALUATION SCOPE
<br />Compliance with the following codes:
<br /> 2021, 2018, 2015, 2012, and 2009 International Building
<br />Code ® (IBC)
<br /> 2013 Abu Dhabi International Building Code (ADIBC)†
<br />†The ADIBC is based on the 2009 IBC. 2009 IBC code sections referenced
<br />in this report are the same sections in the ADIBC.
<br />For evaluation for compliance with codes adopted by Los
<br />Angeles Department of Building and Safety (LADBS), see
<br />ESR-1308 LABC Supplement.
<br />For evaluation for compliance with codes adopted by
<br />California Office of Statewide Health Planning and
<br />Development (OSHPD) and Division of the State Architect
<br />(DSA), see ESR-1308 CBC Supplement.
<br />Properties evaluated:
<br /> Interior finish
<br /> Fire resistance
<br /> Structural
<br />2.0 USES
<br />The Worthington Armstrong Venture (WAVE) ceiling
<br />framing systems described in this report are suspended,
<br />exposed framing systems of ceiling assemblies
<br />used in fire-resistance-rated and nonfire-resistance-rated
<br />construction for interior applications.
<br />3.0 DESCRIPTION
<br />3.1 Grid Components:
<br />3.1.1 Main Runners, Nonfire-resistance-rated: Main
<br />runners for use in nonfire-resistance-rated ceiling
<br />assemblies include the 6100, AL7200, SS7200, 7300, 7302,
<br />7305, 7500, 7502, 6500B, EA7900, 7600, and 76008 7602,
<br />76028, 7603, 76038, 76068, 7607, series. All members are
<br />classified as intermediate-duty in accordance with ASTM
<br />C635, except the following, which are classified as heavy-
<br />duty: 6501, ES7901, EA7903, 6101, 6121A, 6127A, 6132,
<br />6195A, 7301, 7306, 7307, 7501, 7504, 7507, 7508, 7509,
<br />7601, 7604, 7605, 7612, 76128, 76018, 76048 and 76058.
<br />Profiles of runners are shown in Figure 1.
<br />The 7300 and 7500 runners are cold-formed from ASTM
<br />A568 steel. The runners have a hot-dipped galvanized
<br />coating and a factory-installed polyester-painted steel cap
<br />or aluminum cap along the entire length of the bottom
<br />flange. The 6100, 6101, 6500B, 6501, ES7901,7600, and
<br />7601 series have a painted coating in addition to the hot-
<br />dipped galvanized coating, and have no cap. The AL 7200,
<br />EA7900 and EA7903 runners are cold-formed from 3003-
<br />H14 aluminum and have a baked polyester paint coating.
<br />The 6500B, 6501 and ES7901, EA7900 and EA7903
<br />runners have a polyurethane-filled upper bulb in addition to
<br />a polyurethane-coated lower flange.
<br />The ES7901C runners are cold-formed from ASTM A568
<br />steel; have a painted coating in addition to the hot-dipped
<br />galvanized coating; a factory-installed polyester-painted
<br />steel cap ; and include an integral extruded PVC gasket.
<br />The ES7901C main runners are classified as heavy-duty in
<br />accordance with ASTM C635 and shall be used in
<br />conjunction with ES7920C and ES7940C cross runners
<br />listed in Table 3 of this report.
<br />The EA7900C runners are cold-formed from 3105-H24
<br />aluminum and have a baked polyester paint coating and
<br />include an integral extruded PVC gasket. The EA7900C
<br />main runners are classified as intermediate-duty in
<br />accordance with ASTM C635 and shall be used in
<br />conjunction with EA7920C and EA7940C cross runners
<br />listed in Table 3 of this report.
<br />The SS 7200 runners are cold-formed from 300 series
<br />stainless steel complying with ASTM A480. Table 2
<br />specifies dimensions, lengths, and allowable transverse
<br />loads.
<br />2130 E 17th St -
<br />10111279406/07/23
|