Laserfiche WebLink
CA Building Energy Efficiency Standards - 2019 Nonresidential Compliance: http://www.energy.ca.gov/title24/2019standards April 2019 <br />STATE OF CALIFORNIA <br />Outdoor Lighting <br />NRCC-LTO-E (Created 4/19) CALIFORNIA ENERGY COMMISSION <br />Page 1 of 9 <br />CERTIFICATE OF COMPLIANCE NRCC-LTO-E <br />This document is used to demonstrate compliance with requirements in §110.9, §130.0, §130.2, §140.7, and §141.0(b)2L for outdoor lighting scopes using the prescriptive path. <br />Project Name: Bank of America 2020 Exterior Lighting Program CA6-204 Report Page: <br />Project Address: 3730 S Bristol St. Date Prepared: 08/31/2020 <br />A. GENERAL INFORMATION <br />01 Project Location (city) Santa Ana 04 Total Illuminated Hardscape Area (ft2) 42,221 <br />02 Climate Zone 4 <br />03 Outdoor Lighting Zone per Title 24, Part 1 §10-114 or as designated by Authority Having Jurisdiction (AHJ): <br />LZ-0: Very Low - Undeveloped Parkland LZ-2: Moderate - Rural Areas LZ-4: High - Must be reviewed by CA Energy Commission for Approval <br />LZ-1: Low - Developed Parkland LZ-3: Moderately High - Urban Areas✔ <br />B. PROJECT SCOPE <br />Table Instructions: Include any outdoor lighting systems that are within the scope of the permit application and are demonstrating compliance using the prescriptive path <br />outlined in §140.7 or §141.0(b)2L for alterations. <br />My project consists of: <br />01 02 <br />New Lighting System Must Comply with Allowances from §140.7. <br />Altered Lighting System ✔ Is your alteration increasing the connected lighting load (Watts)? Yes No <br />03 04 05 <br />% of Existing Luminaires Being Altered¹ Sum Total of Luminaires Being Added or Altered Calculation Method <br />≥ 10% and < 50% ≥ 50%✔ < 10% 45 Calculated Allowance per §140.7 <br />¹ FOOTNOTES: % of Existing Luminaires Being Altered = (Sum Total of Luminaires Being Added or Altered / Existing Luminaires within the Scope of the Permit Application) x 100 <br />C. COMPLIANCE RESULTS <br />Table Instructions: If any cell on this table says "DOES NOT COMPLY" or "COMPLIES with Exceptional Conditions" refer to Table D. for guidance. <br />Calculation of Total Allowed Lighting Power (Watts) §140.7 or §141.0(b)2L <br />01 02 03 04 05 06 <br />General <br />Hardscape <br />Allowance <br />§140.7(d)1 <br />+ <br />Per <br />Application <br />§140.7(d)2 <br />+ <br />Sales <br />Frontage <br />§140.7(d)2 <br />+ Ornamental <br />§140.7(d)2 + <br />Per Specific <br />Area <br />§140.7(d)2 <br />OR <br />Existing <br />Power <br />§141.0(b)2L <br />= <br />(See Table I) (See Table J) (See Table K) (See Table L) (See Table M) (See Table N) <br />Compliance Results <br />07 08 09 <br /> <br />Total Allowed <br />(Watts) <br />≥ <br /> <br />Total Actual <br />(Watts) <br /> <br />07 Must be ≥ 08 <br />(See Table F) <br />1,083.525 + 240 + + 548.873 + 422.21 OR = 2,294.608 ≥ 2,225.4 COMPLIES <br />Cutoff Compliance (See Table G for Details) COMPLIES <br />Controls Compliance (See Table H for Details) COMPLIES with Exceptional Conditions <br />2020-161485 <br />12/15/20