Laserfiche WebLink
5 Mounting SMA Solar Technology AG <br />Installation ManualSBxx-1SP-US-41-IA-xx-12 28 <br />9. Secure the Conection Unit horizontally using screws <br />and washers. <br />10. Check whether the Connection Unit is firmly positioned. <br />11. Plug the Power Unit into the Connection Unit. Make <br />sure that the screw holes on the left and right sides <br />of the Power Unit are directly over those of the <br />Connection Unit; and the cables protruding from the <br />Power Unit must not be pinched. <br />12. Tighten two screws on the right and left side of the <br />Power Unit (TX25) (torque: 6 Nm ± 0.3 Nm (53 in- <br />lb ± 2.65 in-lb)). <br />13. Pull the ribbon cable used to connect the <br />communication assembly to the Power Unit into the <br />Connection Unit, and plug it into the jack on the <br />communication assembly. <br />COM SPSAC-out <br />D-IN SPSA B <br />M1 X1 X2 M2 <br />ANT. <br />FCC ID: SVF-KP20 <br />IC: 9440A-KP20 <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22