1402 W Meriday Ln - Plan - Laserfiche WebLink

Home Browse Search

sunpower.com Datasheet SunPower®SunVault™ Energy Storage System (ESS): SunVault 13 and SunVault 26 Performance t 3 t 6 Model Number SV-BASE13-12-0 or SV-BASE13-12-A SV-BASE13-12-A and SV-ENERGY13-12-A DC Rated Energy 13 kWh (128 Ah) 26 kWh (256 Ah) Max. Usable Energy1 (DC) 12 kWh (118 Ah) 24 kWh (236 Ah) Individual DC Breaker Rating 125 A / two pole Nom. Internal Battery Voltage 51.2 V Nom. AC Voltage (L–N–L) 120 / 240 VAC 60 Hz, split phase CEC Weighted RTE Efficiency2 > 86% Max. Backup Discharge Power (cont./5 min./10 sec.) 6.8 kW / 7.5 kW / 8.5 kW Max. AC Continuous Backup Output Current 28.5 A Max. AC Output Fault Current 35 A Max. Short Circuit Rating 10 kA AC Overcurrent Protection Device 40 A / two pole Max. Split-Phase Imbalance L–N 4800 W Power Factor (full-rated power) ± 0.85 Battery Cell Chemistry Lithium iron phosphate (LiFePO4) Overvoltage Category II Pollution Degree III Protection Class I Max. Continuous Charge Power (Grid tied / Backup) 6.4 kW Max. Continuous Discharge Power (Grid tied) 6.0 kW Max. AC Continuous Output Current (Grid tied) 27 A 1 Some energy reserved for internal consumption. 2 Tested at 6 kW, 25°C conditions. 3 Extended exposure reduces battery performance. 4 Two enclosures for 26 kWh. 5 Additional hardware details in installation guide. Some parameters can vary depending on site-specific conditions. See the SunVault Storage Installation Guide for guidelines. See www.sunpower.com/facts for additional reference information. Specifications included inthis datasheet are subjectto change withoutnotice. © 2020SunPowerCorporation.AllRightsReserved.SUNPOWER, the SUNPOWERlogo, and SUNVAULT are trademarks or registered trademarks of SunPower Corporation in the U.S. and other countries as well. 1-800-SUNPOWER. Environmental Seismic Rating IEEE 693-2005, AC-156 Environmental Rating Indoor and outdoor rated Acoustic Noise Level < 50 dBA @ 1 m distance, 86°F (30°C) Recommended Operating Temp. 32°F to 86°F (0°C to 30°C) Ambient Operating Temp. 14°F to 113°F (í10°C to 45°C) Shelf Ambient Temp.3 í4°F to 113°F (í20°C to 45°C) Initial Energy Reserve 30% Humidity 0–95% condensing Enclosure Type / Ingress Rating NEMA Type 3R / IP54 Max. Elevation 6560 ft (2000 m) Mechanical User Interface Mobile App, LED Panel Dimensions 64.5 h × 26 w × 14.8 in. d (164 × 66 × 38 cm)4 Weight x x SV-BASE13: 270 lb (122.5 kg) w/inverter; 528 lb (239.5 kg) fully assembled SV-ENERGY13: 400 lb (181.4 kg) fully assembled Mounting Options Wall or floor5 536812 RevB Warranties, Certifications, and Compliance Warranty 10 years Certifications and Compliance x x x x x x x FCC Part 15 Subclass B IEEE 1547 UL 1642 UL 1973 UL 1741 UL 1741 SA (CA Rule 21) UL 9540 x UN 38.3 AUTHORIZATION TO MARK Applicant: Address: Country: Manufacturer: Address: Country: Contact: Contact: Phone: Phone: FAX: FAX: Email: Email: 1 Standard(s): Product: Brand Name: Models: This document supersedes all previous Authorizations to Mark for the noted Report Number. This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Authorization to Mark. Only the Client is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement and in this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect. Intertek Testing Services NA Inc. 545 East Algonquin Road, Arlington Heights, IL 60005 Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672 Standard For Energy Storage Systems And Equipment [ANSI/CAN/UL 9540:2016 Ed.1] Energy Storage System EQS-BASE 13-11-A, SV-BASE13-12-0, SV-BASE13-12-A, SV-BASE13-12-B Equinox and SunVault Party Authorized To Apply Mark: Report Issuing Office: Control Number:5017349 Authorized by: for L. Matthew Snyder, Certification Manager SunPower Corporation 51 Rio Robles, San Jose, CA 95134 USA Brian Kuhn (512)) 9 -4420 na regulatory@sunpowercorp.com Dalsin Industries 9111 Grand Avenue South, Bloomington, MN, 55420 USA George Buechler Gary Rachey (952)) 7 -3643 (952)) 7 -3658 na gbuechler@dalsinind.com grachey@dalsinind.com Same as Manufacturer Intertek Testing Services NA, Inc., Cortland, NY This authorizes the application of the Certification Mark(s) shown below to the models described in the Product(s) Covered section when made in accordance with the conditions set forth in the Certification Agreement and Listing Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report. This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark. Page 1 of 1 ATM for Report 104054868CRT-001 ATM Issued: 15-Nov-2021 ED 16.3.15 (16-Oct-2021) Mandatory /LVWLQJ6XQ9DXOW%DWWHU\(668/ 1402 W Meriday Ln - 201816051/10/2024