Laserfiche WebLink
SM SOLAR <br />MOUNT INSTALLATION GUIDE PAGE <br />AAPPENDIX C <br />ENDCLAMP <br />1. Position clamp to align T-bolt with rail <br />slot. Lower clamp and Insert T-bolt into <br />rail slot. <br />5. When the cap contacts the module <br />frame, release and it will re-engage to <br />the clamp base. <br />2. Rotate clamp clockwise 2/3 of a turn <br />to engage T-bolt inside rail slot. <br />6. Tighten bolt and torque to 15 ft-lbs. <br />3. Place module at least 3/4” from end of <br />rail and position clamp against module <br />frame. <br />7. Confirm clamp is engaged in correct module height position and that the top of the <br />cap is sitting level with the module frame. <br />NOTE: When installing 46mm modules, loosen bolt by 1 turn before positioning clamp <br />against module frame. Do not force clamp onto module frame as this may damage the <br />bonding pin. <br />4. While applying pressure to hold the <br />clamp against the module, push down on <br />the module side of the clamp cap. <br />2110 W 7th St - <br />2017778512/28/22