Laserfiche WebLink
(N) LOCKABLE <br />BLADE TYPE <br />NON-FUSIBLE <br />AC DISCONNECT <br />NEMA 3R <br />C <br />60A-2P <br />120/240VAC <br />(N) 3/4" EMT CONDUIT <br />(N) (2) #12 AWG THWN-2 <br />(N) (1) #8 AWG THWN-2 GND <br />(N) IQ BATTERY 5KWH, <br />IQBATTERY-5P-1P-NA <br />UL LISTED, NEMA 3R <br />SELF CONSUMPTION <br />20A-2P <br />J-BOX <br />NEMA3R <br />15A-2P <br />15A-2P <br />IQ <br />GATEWAY <br />+- <br />DC <br />AC <br />BA <br />BRANCH CIRCUIT 1: <br /> (10) HANWHA <br /> (Q.PEAK DUO BLK ML-G10+ 410) 410 WATT <br />SOLAR MODULES PAIRED WITH <br />(10) 349 WATT <br />(IQ8PLUS-72-M-US) MICROINVERTERS <br />NEW 80A ENPHASE <br />IQ COMBINER 5C BOX <br />PV LOAD CENTER <br />X2-IQ-AM1-240-5C <br />(W-/ INTEGRATED <br />MONITORING) <br />NEMA 3R <br />EXISTING 100A <br />MAIN BREAKER <br />(CENTER FED) <br />EXISTING 100A <br />MAIN PANEL <br />20A PV BREAKER <br />INSTALLED AT OPPOSITE END OF <br />BUSBAR FROM MAIN BREAKER <br />20A-2P <br />100A <br />M <br />(E)GROUND <br />120/240 VAC <br />SINGLE PHASE SERVICE <br />(UNDERGROUND) <br />TO IQ <br />COMBINER <br />TO MSP <br />CT <br />ENPHASE PCS <br />ESS Wire Calculation: <br />Rated Output Current of ESS: 16A <br />(16 X 1.25 = 20A - #12 AWG - OK) <br />PV-5REV: A 8/30/2024 <br />CONSUELO SMITH <br />931 W 18TH ST <br />SANTA ANA, CALIFORNIA 92706 <br />APN # 39905308 TEL #: (714) 975-0828 <br />CLIENT: <br />ELECTRICAL <br />CSLB # 619149 CLASS: B, C-10 <br />NAME: GARY GIETZ, JACK MCCLARY <br />SIGNED: 8/30/2024 PHONE 310.904.6139 <br />ENERGY SERVICE PARTNERS <br />970 W 190TH ST, STE 302 <br />TORRANCE, CA 90502 <br />CONTRACTOR: <br />CONDUCTOR / CONDUIT SCHEDULE <br />∆ <br />TAG CONDUCTOR CONDUCTOR <br />SIZE <br />NUMBER OF <br />CONDUCTORS <br />CONDUIT/CABLE <br />TYPE CONDUIT SIZE <br />A ENPHASE Q CABLE 12 AWG 2 <br />FREE AIR N/A <br />EGC/GEC: BARE COPPER 6 AWG 1 <br />B LINE: THHN/THWN-2 10 AWG 2 <br />EMT 3/4" <br />EGC/GEC: THHN/THWN-2 8 AWG 1 <br />C LINE: THHN/THWN-2 10 AWG 2 <br />EMT 3/4"NEUTRAL: THHN/THWN-2 10 AWG 1 <br />EGC/GEC: THHN/THWN-2 10 AWG 1 <br />ELECTRICAL <br />EVEREST INTEGRATED GROUNDING & LAY-IN LUGS ARE UL2703 LISTEDGROUNDING DETAIL <br />scale: NTS <br />RAILS MODULES <br />EVEREST RAIL <br />PV MODULE FRAME <br />EVEREST GROUNDING PIERCES <br />THROUGH ANODIZED COATINGS <br />OF MODULE FRAMES AND RAILS <br />EVEREST UNIVERSAL <br />FASTENING OBJECT <br />LAY-IN LUG TERMINAL <br />AL/CU DUAL RATED <br />(TIN PLATED CU) <br />SS SET SCREW INCLUDED <br />EVEREST RAIL <br />#10-24 SS LOCK NUT <br />6 AWG BARE CU WIRE <br />TE#10-24 X 3/4" SS HCS BOLT <br />#10 SS EXTERNAL TOOTH <br />LOCK (STAR) WASHER <br />SYSTEM NOTES: <br />1.ENPHASE IQ 8 / 8PLUS/ IQ8A MICROINVERTERS DO NOT REQUIRE GROUNDING <br />ELECTRODE CONDUCTORS OR EQUIPMENT GROUNDING <br />CONDUCTORS. THE MICROINVERTERS ITSELF HAS CLASS II DOUBLE-INSULATED RATING, <br />WHICH INCLUDES GROUND FAULT PROTECTION. <br />2.ENPHASE Q CABLE HAS NO NEUTRAL WIRE - (2 WIRE DOUBLE INSULATED CABLING) <br />3.MODULES ARE BONDED TO RAIL. <br />4.RAILS ARE BONDED WITH UL 2703 RATED LAY-IN LUGS <br />5.SYSTEM IS UNGROUNDED <br />6.BARE COPPER IS TRANSITIONED TO THHN/THWN-2 VIA IRREVERSIBLE CRIMP; GEC TO <br />BE CONTINUOUS PER CEC 250.64(C) <br />7.SUB-BRANCHES ARE CENTER-FED AT JBOX TO MAKE ONE TOTAL BRANCH CIRCUIT. <br />8.ENPHASE IQ ENVOY INSIDE IQ COMBINER REQUIRES A NEUTRAL TO BE LANDED AT <br />THE NEUTRAL BUSS AT MAIN PANEL PER ENPHASE INSTALLATION INSTRUCTIONS. <br />9.ENPHASE MICROINVERTERS ARE ALL RAPID SHUTDOWN READY PER CEC 690.12 <br />ALL TERMINALS <br />ARE 75° CELSIUS <br />RATED <br />ENPHASE Q CABLE TO BE <br />ATTACHED TO RAIL MIN. 3-1/2" <br />ABOVE ROOF SURFACE <br />TOTAL SYSTEM <br />TOTAL NUMBER OF MODULES 10 <br />TOTAL NUMBER OF ENPHASE <br />INVERTERS 10 NEC 705.13 - POWER CONTROL SYSTEMS <br />A power control system (PCS) shall be listed and evaluated to control <br />the output of one or more power production sources, energy storage <br />systems (ESS), and other equipment. The PCS shall limit current and <br />loading on the busbars and conductors supplied by the PCS <br />For the circuits connected to a PCS, the PCS shall limit the current to <br />the ampacity of the conductors or the ratings of the busbars to which <br />it is connected in accordance with 705.13(A) through (E). <br />SOLAR PV CIRCUIT BREAKER <br />MAIN SERVICE BUS RATING <br />PER CEC 705.12(B)(3)(2) <br />100A x 120% - 100A = 20A <br />TOTAL BUS LOAD = ((12.1A +16A) x 1.25) = 35.125A <br />931 W Eighteenth <br />St10/18/2024