Laserfiche WebLink
© 2020 IRONRIDGE, INC. VERSION 3.2 FLUSH MOUNT INSTALLATION MANUAL - 4 <br />COMPON e NTS <br />BONDING HARDWARe TORQUe VALUeS <br />Please refer to each attachment's individual section for full details <br />on all torque values and instructions. <br /> ☐Bonded Splice Screws (5/16" Socket): 20 in-lbs <br /> ☐Universal Fastening Object (7/16" Socket): 80 in-lbs <br /> ☐Rail Grounding Lug Nut (7/16" Socket): 80 in-lbs <br /> ☐Module Grounding Lug Nut (7/16" Socket): 60 in-lbs <br /> ☐Grounding Lug Terminal Screws (7/16" Socket): 20 in-lbs <br /> ☐Expansion Joint Nuts (7/16" Socket): 80 in-lbs <br /> ☐Microinverter Kit Nuts (7/16" Socket): 80 in-lbs <br /> ☐Frameless Module Kit Nuts (7/16" Socket): 80 in-lbs <br /> ☐3/8" Bonding Hardware Nuts (7/16" Socket): 250 in-lbs <br /> ➢Unless otherwise noted, all components have been evaluated for <br />multiple use. They can be uninstalled and reinstalled in the same <br />or new location. <br />COMPONeNTS <br />Bonded SpliceXR Rail <br />UFO and Stopper <br />Sleeve CAMO <br />Rail Grounding Lug <br />8" Bonding Jumper <br />Single Use Only <br />Expansion Joint <br />Wire Clip <br />End Cap <br />QMPV QBOX <br />3/8" Bonding <br />HardwareMicroinverter Kit <br />Frameless Module Kit <br />Frameless <br />End/Mid Clamp <br />QMPV Classic <br />Conduit Comp Mount <br />QMPV Composition <br />Conduit Penetration <br />QMPV Tile Conduit <br />Mount <br />QMPV Tile Conduit <br />Penetration <br />PRe-INSTALLATION <br /> ☐Verify module compatibility. See Page 21 for info. <br />TOOLS Re QUIR e D <br /> ☐Cordless Drill (non-impact) <br /> ☐Impact Driver (for lag bolts) <br /> ☐Torque Wrench (0-250 in-lbs) <br /> ☐7/16” Socket <br /> ☐1/2" Socket <br /> ☐9/16" Socket <br /> ☐7/32" Drill bit <br /> ☐1/8" Drill bit <br /> ☐1/4" Drill bit <br /> ☐T30 Bit <br /> ☐Channel Lock Pliers <br /> ☐#3 Phillips Bit <br /> ☐Paddle Bit <br />Ironridge L-Foot <br />BOSS <br />Module Grounding <br />Lug <br />3000 S Sycamore St Unit# <br />A- 201822724/29/2024