Laserfiche WebLink
Design Results Actual @ Location Allowed Result LDF Load: Combination (Pattern) <br />Member Reaction (lbs)207 @ 2 1/2"3281 (3.50")Passed (6%)--1.0 D + 1.0 Lr (All Spans) <br />Shear (lbs)173 @ 8 9/16"1238 Passed (14%)1.25 1.0 D + 1.0 Lr (All Spans) <br />Moment (Ft-lbs)403 @ 4' 3 1/2"1060 Passed (38%)1.25 1.0 D + 1.0 Lr (All Spans) <br />Live Load Defl. (in)0.094 @ 4' 3 1/2"0.442 Passed (L/999+)--1.0 D + 1.0 Lr (All Spans) <br />Total Load Defl. (in)0.171 @ 4' 3 1/2"0.590 Passed (L/622)--1.0 D + 1.0 Lr (All Spans) <br />System : Roof <br />Member Type : Joist <br />Building Use : Residential <br />Building Code : IBC 2021 <br />Design Methodology : ASD <br />Member Pitch : 5/12 <br />•Deflection criteria: LL (L/240) and TL (L/180). <br />•Allowed moment does not reflect the adjustment for the beam stability factor. <br />•A 15% increase in the moment capacity has been added to account for repetitive member usage. <br />•Applicable calculations are based on NDS. <br />• Blocking Panels are assumed to carry no loads applied directly above them and the full load is applied to the member being designed. <br />Bearing Length Loads to Supports (lbs) <br />Supports Total Available Required Dead Roof Live Factored Accessories <br />1 - Beveled Plate - DF 3.50"3.50"1.50"93 114 207 Blocking <br />2 - Beveled Plate - DF 3.50"3.50"1.50"93 114 207 Blocking <br />•Maximum allowable bracing intervals based on applied load. <br />Lateral Bracing Bracing Intervals Comments <br />Top Edge (Lu)9' 4" o/c <br />Bottom Edge (Lu)9' 4" o/c <br />Dead Roof Live <br />Vertical Load Location (Side)Spacing (0.90)(non-snow: 1.25)Comments <br />1 - Uniform (PSF)0 to 8' 7"16"15.0 20.0 ROOF <br />Weyerhaeuser warrants that the sizing of its products will be in accordance with Weyerhaeuser product design criteria and published design values. Weyerhaeuser expressly disclaims any other warranties <br />related to the software. Use of this software is not intended to circumvent the need for a design professional as determined by the authority having jurisdiction. The designer of record, builder or framer is <br />responsible to assure that this calculation is compatible with the overall project. Accessories (Rim Board, Blocking Panels and Squash Blocks) are not designed by this software. Products manufactured at <br />Weyerhaeuser facilities are third-party certified to sustainable forestry standards. Weyerhaeuser Engineered Lumber Products have been evaluated by ICC-ES under evaluation reports ESR-1153 and ESR-1387 <br />and/or tested in accordance with applicable ASTM standards. For current code evaluation reports, Weyerhaeuser product literature and installation details refer to <br />www.weyerhaeuser.com/woodproducts/document-library. <br />The product application, input design loads, dimensions and support information have been provided by Sam Mobed <br />Weyerhaeuser Notes <br />All locations are measured from the outside face of left support (or left cantilever end). All dimensions are horizontal.Member Length : 9' 5 7/8" <br />MEMBER REPORT PASSED <br />ROOF, RR-1 <br />1 piece(s) 2 x 6 DF No.2 @ 16" OC <br />ForteWEB Software Operator Job Notes 1/12/2024 7:14:50 AM UTC <br />Sam Mobed <br />Nick Engineering Inc. <br />(310) 433-7927 <br />smobed@gmail.com <br />ForteWEB v3.6, Engine: V8.3.1.5, Data: V8.1.4.1 <br />File Name: 1401 W Highland St (ADU) <br />Page 1 / 1 <br />1401 W Highland St & #2 - <br />101118574 & 766/10/2024