|
RE
<br />F
<br />.
<br />DW
<br />DOOR/WINDOW REMARKS:
<br />(1) DOOR SHALL HAVE A MINIMUM CLEAR WIDTH OF 32" WHEN MEASURED BETWEEN THE
<br />FACE OF THE DOOR AND THE STOP,WITH THE DOOR OPEN AT 90 DEGREE.
<br />(2) DOOR SHALL HAVE A MINIMUM CLEAR HEIGHT OF 78", MEASURED FROM THE TOP OF
<br />THE THRESHOLD TO THE BOTTOM OF THE STOP
<br />(3) DOOR SHALL BE READILY OPENABLE FROM THE INSIDE THE DWELLING WITHOUT THE
<br />USE OF A KEY OR SPECIAL KNOWLEDGE OR EFFORT.
<br />(4) SELF-CLOSING, TIGHT FITTING, SOLID WOOD, 1-3/8'' THICK DOOR, NOT LESS THAN 20-
<br />MIN FIRERATED DOOR AT OPENING TO DWELLING (CBC 715.4.3).
<br />(5) THE MANUFACTURED WINDOWS AND SLIDING DOOR SHALL HAVE A LABEL ATTACHED
<br />CERTIFIED BY THE NATIONALS FENESTRATION RATING COUNCIL (NFRC) AND
<br />COMPLIANCE WITH THE ENERGY CALCULATIONS.
<br />(6) THE LOAD RESISTANCE OF GLASS UNDER UNIFORM LOAD SHALL BE
<br />DETERMINED IN ACCORDANCE WITH ASTM E1300.
<br />(7) DOOR SHALL BE READILY OPENABLE FROM THE INSIDE THE DWELLING
<br />WITHOUT THE USE OF A KEY OR SPECIAL KNOWLEDGE OR EFFORT.
<br />(8) ALL TEMPERED GLASS (T.G.) SHALL BE ACID-ETCHED, SAND-BLASTED,
<br />CERAMIC-FIRED, ASER-ETCHED, OR EMBOSSED PER CRC 2406.3.
<br />(9) DEAD BOLT LOCKS ARE REQUIRED ON ALL EXTERIOR DOORS
<br />(INCLUDING HOUSE TO GARAGE
<br />(10) GLAZING SHALL BE SAFETY GLAZING IF LESS THAN 72" ABOVE
<br />BATHROOM FINISH FLOOR
<br />1. ALL DOORS AND WINDOWS SHALL MEET CITY'S SECURITY ORDINANCE.
<br />2. ALL EXTERIOR DOORS & WINDOWS SHALL BE WEATHER TIED AND PROVIDE WITH INSECT SCREEN-METAL.
<br />DOORS & WINDOWS SHALL BE IN COMPLIANCE WITH ANSI. STD. A13 OR A1342.
<br />3. THE MANUFACTURED WINDOWS AND SLIDING DOOR SHALL HAVE A LABEL ATTACHED CERTIFIED BY THE
<br />NATIONALS FENESTRATION RATING COUNCIL (NFRC) AND COMPLIANCE WITH THE ENERGY CALCULATIONS.
<br />4. THE LOAD RESISTANCE OF GLASS UNDER UNIFORM LOAD SHALL BE DETERMINED IN ACCORDANCE WITH
<br />ASTM E1300.
<br />5. ALL TEMPERED GLASS (T.G.) SHALL BE ACID-ETCHED, SAND-BLASTED, CERAMIC-FIRED, LASER-ETCHED, OR
<br />EMBOSSED PER CRC 2406.3.
<br />6. GLAZING AND INSULATION SHALL CONFORM TO THE STATE ENERGY INSULATION STANDARD.
<br />7. DEAD BOLT LOCKS ARE REQUIRED ON ALL EXTERIOR DOORS (INCLUDING HOUSE TO GARAGE)
<br />8. GLAZING SHALL BE SAFETY GLAZING IF LESS THAN 72" ABOVE BATHROOM FINISH FLOOR
<br />9. SLIDING GLASS DOORS AND WINDOWS LOCATED LESS THAN 16 FEET ABOVE ANY SURFACE AVAILABLE
<br />FOR USE BY THE PUBLIC SHALL BE CAPABLE OF BEING LOCKING SECURELY. MOVEABLE PANELS SHALL NOT
<br />BE EASILY REMOVED FROM THE FRAME.
<br />10. ALL MAIN OR FRONT ENTRY TO DWELLINGS SHALL BE ARRANGED SO THAT THE OCCUPANT HAS A VIEW
<br />OF THE AREA IMMEDIATELY OUTSIDE WITHOUT OPENING DOOR. SUCH VIEW MAY BE POVIDED BY A DOOR
<br />VIEW, A VIEW PORT, WINDOW, OR OTHER OPENING.
<br />11. ALL SWINGING DOORS SHALL BE EQUIPPED WITH A DEAD BOLT WITH A MINIMUM THROW OF 1 INCH AND
<br />AN EMBEDMENT OF NOT LESS THAN 5/8 INCH.
<br />12. THE INACTIVE LEAF OF A PAIR OF DOORS AND THE UPPER LEAF OF DUTCH DOORS SHALL BE EQUIPPED
<br />WITH A DEAD BOLT.
<br />13. NON-REMOVABLE PINS SHALL BE USED IN PIN TYPE HINGES WHICH ARE ACCESSIBLE FROM THE OUTSIDE
<br />WHEN THE DOOR IS CLOSED.
<br />14. UNFRAMED GLASS DOORS SHALL BE FULLY TEMPERED GLASS NOT LESS THAN 1/2" THICK.
<br />15. NARROW-FRAMED GLASS DOORS SHALL BE FULLY TEMPERED GLASS NOT LESS THAN 1/4" THICK.
<br />16. ANY GLASS WHICH IS LOCATED WITHIN 40 INCHES OF THE BLOCKING DEVICE ON A DOOR SHALL BE FULLY
<br />TEMPERED, OR HAVE APPROVED METAL BARS, SCREENS OR GRILLS.
<br />17. IT IS CONTRACTOR'S RESPONSIBILITY TO CONFIRM DOOR/WINDOW ROUGH OPENING DIMENSIONS WITH
<br />THE MANUFACTURE/SUPPLIER PRIOR TO BEGIN CONSTRUCTION
<br />18. AUTOMATIC GARAGE DOOR OPENERS, IF PROVIDED, SHALL BE LISTED IN ACCORDANCE WITH UL 325.
<br />(R309.4)
<br />19. EMERGENCY EGRESS:
<br />A. MIN. SET CLEAR OPENING OF 5.7 SQUARE FEET.
<br />B. MIN. SET CLEAR HEIGHT OF 24 INCHES.
<br />C. WINDOW SILL CLEAR OPENING EMERGENCY EGRESS NO MORE THAN 44 INCHES ABOVE THE FLOOR.
<br />FINISH NOTES:
<br />(1) SEAL AND PAINTED W/ A COAT FLAT VINYL.
<br />(2) UNDERCOAT AND FINISH W/SEMI-GLOSS ENAMEL
<br />(3) KNOCKDOWN TEXTURE.
<br />(4) TAPED DRYWALL JOINTS.
<br />(5) SPRAYED SIMULATED ACOUSTIC PLASTER.
<br />(6) ORANGE PEEL FINISH.
<br />1.GYPSUM BOARD SHALL NOT BE USED WHERE THERE WILL BE DIRECT EXPOSURE TO WATER, OR IN
<br /> AREAS SUBJECT TO CONTINUOUS HIGH HUMIDITY. CRC R702.3.7.1
<br />2.ALL DOORS & WINDOWS SHALL MEET CITY'S SECURITY ORDINANCE
<br />3.CONCRETE SLAB AND UNDER FLOOR INSPECTIONS SHALL BE MADE AFTER IN-SLAB OR UNDER-FLOOR
<br /> REINFORCING STEEL AND BUILDING SERVICE EQUIPMENT, CONDUITS, PIPING OR OTHER ANCILLARY
<br /> BUILDING TRADE PRODUCTS OR EQUIPMENT ARE INSTALLED, BUT BEFORE ANY CONCRETE IS PLACED
<br /> OR FLOOR SHEATHING IS INSTALLED, INCLUDING THE SUBFLOOR R109.1.1.1
<br />4.ROUGH INSPECTION OF PLUMBING, MECHANICAL, AND ELECTRICAL SYSTEMS SHALL BE MADE PRIOR
<br /> TO COVERING OR CONCEALMENT, BEFORE FIXTURES OR APPLIANCES ARE SET OR INSTALLED, AND
<br /> PRIOR TO FRAMING INSPECTION R109.1.2
<br />5.WATER PIPING MATERIAL WITHIN A BUILDING SHALL BE IN ACCORDANCE WITH SEC 604.1 OF THE
<br /> CALIFORNIA PLUMBING CODE. PEX, CPVC AND OTHER PLASTIC WATER PIPING SYSTEM SHALL BE
<br /> INSTALLED IN ACCORDANCE WITH THE REQUIREMENTS OF SEC 604 OF THE CPC, INSTALLATION
<br /> STANDARDS OF APPENDIX 1 OF THE CPC AND MANUFACTURERS RECOMMENDED INSTALLATION
<br /> STANDARDS. CPVC WATER PIPING REQUIRESA CERTIFICATION OF COMPLIANCE AS SPECIFIED IN SEC
<br /> 604.4.1.1 OF THE CPC PRIOR TO PERMIT ISSUANCE.
<br />BUILDING DEPT. NOTES:
<br />8'
<br />-
<br />5
<br />
<br />1
<br />/
<br />2
<br />"
<br />5'-0"
<br />17
<br />"
<br />17
<br />"
<br />2'
<br />-
<br />1
<br />1
<br />
<br />1
<br />/
<br />2
<br />"
<br />2'
<br />-
<br />1
<br />0
<br />"
<br />2'
<br />-
<br />8
<br />"
<br />8'
<br />-
<br />5
<br />
<br />1
<br />/
<br />2
<br />"
<br />A.081
<br />2
<br />30'' CLR
<br />ADU F.F.
<br />0' -8"
<br />ADU TOP PL
<br />10' -8"
<br />1'
<br />-
<br />0
<br />"
<br />2'
<br />-
<br />6
<br />"
<br />1'
<br />-
<br />6
<br />"
<br />3'
<br />-
<br />0
<br />"
<br />10
<br />'
<br />-
<br />0
<br />"
<br />CEILING SOFFIT
<br />RANGE
<br />RE
<br />F
<br />R
<br />I
<br />G
<br />E
<br />R
<br />A
<br />T
<br />O
<br />R
<br />2'
<br />-
<br />0
<br />"
<br />ADU F.F.
<br />0' -8"
<br />ADU TOP PL
<br />10' -8"
<br />WI
<br />N
<br />D
<br />O
<br />W
<br />WI
<br />N
<br />D
<br />O
<br />W
<br />CEILING SOFFIT
<br />DISH
<br />WASHER
<br />3'
<br />-
<br />0
<br />"
<br />1'
<br />-
<br />6
<br />"
<br />2'
<br />-
<br />6
<br />"
<br />1'
<br />-
<br />0
<br />"
<br />10
<br />'
<br />-
<br />0
<br />"
<br />RE
<br />F
<br />R
<br />I
<br />G
<br />E
<br />R
<br />A
<br />T
<br />O
<br />R
<br />2'-1"1'-11"3'-6"1'-6"
<br />8'-11"
<br />1'
<br />-
<br />0
<br />"
<br />ADU F.F.
<br />0' -8"
<br />MIRROR
<br />3'
<br />-
<br />0
<br />"
<br />6"
<br />3'
<br />-
<br />0
<br />"
<br />17"17"
<br />6'
<br />-
<br />0
<br />"
<br />2'-8"2'-10"2'-11 1/2"
<br />8'-5 1/2"
<br />WI
<br />N
<br />D
<br />O
<br />W
<br />WI
<br />N
<br />D
<br />O
<br />W
<br />SHOWER
<br />ADU F.F.
<br />0' -8"
<br />5'-0"
<br />3'
<br />-
<br />0
<br />"
<br />3'
<br />-
<br />0
<br />"
<br />3'-3"1'-9"
<br />31 1/2"
<br />6'
<br />-
<br />0
<br />"
<br />SHOWER
<br />2'-0"2'-0"3'-6"1'-6"
<br />9'-0"
<br />3'
<br />-
<br />0
<br />"
<br />2'
<br />-
<br />0
<br />"
<br />2'
<br />-
<br />6
<br />"
<br />2'
<br />-
<br />0
<br />"
<br />1'
<br />-
<br />6
<br />"
<br />2'
<br />-
<br />0
<br />"
<br />13
<br />'
<br />-
<br />0
<br />"
<br />A.06
<br />1
<br />2
<br />IT IS THE SUBCONTRACTORS RESPONSIBILITY PRIOR TO OR DURING CONSTRUCTION TO
<br />NOTIFY THE DESIGNERS OR JOB FOREMAN IN WRITING OR IN VERBAL OF ANY
<br />PERCEIVED ERRORS OR OMISSIONS IN THE PLANS AND SPECIFICATIONS OF WHICH A
<br />SUBCONTRACTOR THOROUGHLY KNOWLEDGEABLE WITH THE BUILDING CODES AND
<br />METHODS OF CONSTRUCTION SHOULD REASONABLY BE AWARE. WRITTEN OR VERBAL
<br />INSTRUCTIONS ADDRESSING SUCH PERCEIVED ERRORS OR OMISSIONS SHALL BE
<br />RECEIVED FROM THE DESIGNERS OR JOB FOREMAN PRIOR TO THE SUBCONTRACTORS
<br />BEFORE PROCEEDING WITH THE WORK. THE OWNERS WILL NOT BE RESPONSIBLE FOR
<br />ANY DEFECTS IN CONSTRUCTION IF THESE PROCEDURES ARE NOT BEING FOLLOWED.
<br />DESCRIPTIONDATEDELTA
<br />NEW DETACHED ADU 2
<br />BEDS, 2BATHS,
<br />LIVING , KITCHEN,
<br />DINING , GARAGE-1
<br />CAR
<br />PROJECT CONTACT
<br />OWNERSHIP
<br />KHANH DAO
<br />10448 SALINAS RIVER CIR
<br />FOUNTAIN VALLEY, CA 92708
<br />PHONE: (714) 390-5154
<br />1 28/11/2023 PLANNING CORRECTIONS
<br />LOAN PHAM
<br />17021 BOLERO LN
<br />HUNTINGTON BEACH, CA 92649
<br />PHONE: 714-614-6344
<br />EMAIL:
<br />LOANPHAM8888@YAHOO.COM
<br />A.08
<br />ROOM FINISH &
<br />DOOR/WINDOW
<br />SCHEDULE &
<br />INTERIOR DETAILS
<br />(N
<br />)
<br />
<br />D
<br />E
<br />T
<br />A
<br />C
<br />H
<br />E
<br />D
<br />
<br />A
<br />D
<br />U
<br />,
<br />
<br />U
<br />N
<br />I
<br />T
<br />
<br />2
<br />90
<br />1
<br />
<br />E
<br />
<br />M
<br />Y
<br />R
<br />T
<br />L
<br />E
<br />
<br />S
<br />T
<br />,
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />1
<br />(E
<br />)
<br />
<br />S
<br />I
<br />N
<br />G
<br />L
<br />E
<br />
<br />F
<br />A
<br />M
<br />I
<br />L
<br />Y
<br />
<br />R
<br />E
<br />S
<br />I
<br />D
<br />E
<br />N
<br />C
<br />E
<br />90
<br />1
<br />
<br />E
<br />
<br />M
<br />Y
<br />R
<br />T
<br />L
<br />E
<br />
<br />S
<br />T
<br />,
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />1
<br />NUMBE
<br />R DOOR SIZE QTY DESCRIPTION U-FACTOR SHGC REMARKS
<br />1 3' - 0" x 6' - 8" 1 EXTERIOR DOOR 1 PANEL/TEMPERED GLASS, VINYL FRAME, PAINTED FINISH 0.5 ENTRY DOOR (1) (2) (3) (9)
<br />2 2' - 8" x 6' - 8" 1 SOLID CORE 1 PANEL, WOOD FRAME, PAINTED FINISH, 20 MINUTES MIN. FIRE
<br />RATED DOOR
<br />GARAGE TO HOUSE (4)
<br />3 2' - 8" x 6' - 8" 4 HOLLOW CORE 1 PANEL, WOOD FRAME, PAINTED FINISH INTERIOR
<br />4 5' - 0" x 6' - 8" 1 SIDELITE SOLID CORE/TEMP. GLASS, VINYL FRAME, PAINTED FINISH EXTERIOR (1) (2) (3) (9)
<br />5 3' - 0" x 6' - 8" 1 HOLLOW CORE 1 PANEL, WOOD FRAME, PAINTED FINISH INTERIOR
<br />6 5' - 0" x 6' - 8" 1 SLIDING DOOR, HOLLOW CORE, WOOD FRAME, PAINTED FINISH INTERIOR
<br />7 8' - 0" x 8' - 0" 1 METAL GARAGE DOOR
<br />Grand total: 10
<br />DOOR SCHEDULEXWINDOW SCHEDULEX
<br />ID QTY WINDOW SIZE DESCRIPTION U-FACTOR SHGC REMARKS
<br />A 1 5' - 0" x 4' - 0"SLIDER, DUAL GLASS/ VINYL FRAME SOLID CORE, FINISH
<br />PER MFGR.
<br />0.3 0.23
<br />B 2 2' - 6" x 2' - 0"SLIDER, DUAL GLASS/ VINYL FRAME SOLID CORE, FINISH
<br />PER MFGR.
<br />0.3 0.23 TEMP. OBSCURED @BATH (5), (10)
<br />C 1 3' - 6" x 3' - 6"SLIDER, DUAL GLASS/ VINYL FRAME SOLID CORE, FINISH
<br />PER MFGR.
<br />0.3 0.23
<br />Grand total: 4
<br />DOOR/WINDOW NOTES
<br />ROOM FINISH SCHEDULE
<br />ROOM FLOOR BASE WALL MATERIAL WALL FIN.
<br />CEILING
<br />MATERIAL CEILING FIN. HEIGHT
<br />BEDROOM#1 VINYL WOOD 1/2'' GYP.BD. 1,3 1/2'' GYP.BD. 1,3 10'-0''
<br />KITCHEN VINYL WOOD 1/2'' GYP.BD. 1,3 1/2'' GYP.BD. 1,3 10'-0''
<br />LIVING VINYL WOOD 1/2'' GYP.BD. 1,3 1/2'' GYP.BD. 1,3 10'-0''
<br />BEDROOM#2 VINYL WOOD 1/2'' GYP.BD. 1,3 1/2'' GYP.BD. 1,3 10'-0''
<br />W.I.C VINYL WOOD 1/2'' GYP.BD. 1,3 1/2'' GYP.BD. 1,3 10'-0''
<br />BATH#1 TILE WOOD 1/2'' GYP.BD. 2,3 1/2'' GYP.BD. 2,3 10'-0''
<br />BATH#2 TILE WOOD 1/2'' GYP.BD. 2,3 1/2'' GYP.BD. 2,3 10'-0''
<br />1/2" = 1'-0"1PROPOSED ADU BATH#2 PLAN
<br />1/2" = 1'-0"2KITCHEN ELEVATION 1 1/2" = 1'-0"3KITCHEN ELEVATION 2
<br />1/2" = 1'-0"4PROPOSED BATH#2 SECTION1 1/2" = 1'-0"5PROPOSED BATH#2 SECTION 2
<br />1/2" = 1'-0"6PROPOSED ADU KITCHEN PLAN
<br />1. STRING SHALL BE FABRICATED FROM EITHER HARD-DRAWN SPRING WIRE ( PER ASTM A227-21) OR OIL-TEMPERED WIRE ( PER ASTM A229-71)
<br />2. MINIMUM DESIGN STANDARD SHALL BE 9000 CYCLES.
<br />3. PHYSICAL CYCLING TESTS SHALL BE EQUIPPED WITH AN APPROVED TESTING AGENCY.
<br />4. PHYSICAL CYCLING TESTS SHALL BE EQUIPPED WITH AN APPROVED DEVICE CAPABLE OF RESTRAINING THE SPRING OR ANY PART THERE OF IN THE EVENT IT
<br />BREAKS. CONTAINMENT DEVICE SHALL BE TESTED AND CERTIFIED BY AN APPROVED TESTING AGENCY.
<br />GARAGE DOOR STRINGS PER SEC. R309.5
<br />901 E Myrtle St Unit# 2 -
<br />1011181606/27/2024
|