My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
1414 W Edinger Ave - Plan
PBA
>
Building
>
ProjectDox
>
E
>
Edinger Ave
>
1414 W Edinger Ave
>
1414 W Edinger Ave - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
6/6/2025 1:22:58 PM
Creation date
6/6/2025 1:22:21 PM
Metadata
Fields
Template:
Plan
Permit Number
20184135
30147841
40139567
101121037
Full Address
1414 W Edinger Ave
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
49
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
4" BACKSPLASH WHERE <br />OCCURS <br />DRAWERS AND PULLS WHERE <br />OCCURS <br />RECESSED METAL STANDARDS <br />FOR ADJ SHELVES, TYP <br />ADJ SHELF 3/4" MDF <br />COUNTERTOP AS SCHEDULED <br />2' <br /> <br />- <br /> <br />1 <br />0 <br />" <br />3/4" MDF DOORS W/ <br />PLAM ALL BOTH SIDES <br />HINGES-CONCEALED <br />SELF CLOSING <br />.2' - 1" <br />TYP <br />SINK WHERE OCCURS <br />PLAM INTEGRAL DOOR/ BASE <br />4" BACKSPLASH WHERE OCCURS <br />COUNTERTOP AS SCHEDULED <br />INSULATED PIPE <br />2' <br /> <br />- <br /> <br />3 <br />" <br /> <br />M <br />I <br />N <br />8" <br />9" <br /> <br />M <br />I <br />N <br />MELAMINE LINER ON ALL <br />INTERIOR SURFACES <br />3/4" MDF DOORS W/ PLAM <br />FINISH ON BOTH SIDES <br />OF DOOR & EDGES <br />HINGES-CONCEALED <br />SELF-CLOSING <br />3" MAX <br />GARBAGE DISPOSAL, <br />WHERE OCCURS <br />FAUCET AS SCHEDULED <br />SEE PLUMBING DRAWINGS <br />4" <br />4" BACKSPLASH WHERE <br />OCCURS <br />COUNTERTOP AS SCHEDULED <br />DRAWERS AND PULLS <br />2' <br /> <br />- <br /> <br />1 <br />0 <br />" <br />3/ <br />8 <br />" <br />EQ <br />. <br />1/ <br />8 <br />" <br />EQ <br />. <br />1/ <br />8 <br />" <br />EQ <br />. <br />1/ <br />8 <br />" <br />EQ <br />. <br />MELAMINE LINER ON ALL <br />INTERIOR SURFACES <br />3/4" MDF DOORS W/ PLAM <br />ON ALL SIDES <br />.2' - 1" <br />COORDINATE HEIGHT W/SINK <br />VALENCE WHERE OCCURS <br />SIM <br />A-4.20 <br />6 <br />MELAMINE LINER ON ALL <br />INTERIOR SURFACES <br />ADJ SHELF 3/4" MDF <br />PULL AS SCHEDULED <br />HINGES-CONCEALED <br />SELF CLOSING <br />RECESSED METAL STANDARDS <br />FOR ADJ SHELVES <br />3/4" MDF DOORS W/ <br />PLAM ON ALL SIDES <br />OPEN ABOVE <br />SE <br />E <br /> <br />E <br />L <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />SE <br />E <br /> <br />E <br />L <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />SEE PLAN <br />2" <br />PROVIDE 2" VALENCE <br />(UNDER-CABINET <br />LIGHT AS OCCURS) <br />UNDER-COUNTER <br />LIGHT AS OCCURS <br />#12 x 3" SMS W/FINISHING WASHER @16" <br />O.C. & 2" FROM CORNERS TYP <br />BACKING PLATE TYP. <br />1/4" PLYWOOD CABINET <br />BACKING <br />WALL PER PLAN <br />3/4" BOTTOM W/ PLAM <br />FINISH <br />1x4 ANCHOR STRIP3/4" MIN <br />3" <br />BASE (SEE ROOM <br />FINISH SCHEDULE <br />4" <br />3x PRESSURE TREATED RIPPED <br />TO SIZE W/#12x4" SHEET METAL <br />SCREW W/FINISH WASHER @16" <br />O.C. AT BOTTOM TRACK TYP. <br />2x4 PRESSURE TREATED PLATE <br />ATTACH TO SLAB W/.145" DIA. x <br />3 1/2" POWDER ACTUATED <br />ANCHOR AT 32" O.C. MIN. <br />(MIN. 2 PER PLATE) <br />EDGE BANDING <br />2x PRESSURE TREATED RIPPED <br />TO SIZE W/ 16d @16" O.C. TO <br />PLATE <br />4 1/2" <br />GYP. BRD. TYP. <br />CABINET BACKING <br />#12 x 3" WOOD SCREW <br />W/FINISH WASHER @16" O.C. <br />MIN <br />3/4". <br />SEE PLAN FOR WALL TYPE <br />SEALANT TYP. <br />SIDE SPLASH AT END <br />WALL CONDITIONS <br />PLASTIC LAMINATE <br />TOP AND SPLASH <br />1x4 ANCHOR STRIP <br />#12 x 3" SHEET METAL SCREW <br />W/FINISHING WASHER @16" <br />O.C. & 2" FROM CORNERS TYP. <br />CABINET BACKING <br />SEE INTERIOR <br />ELEVATION <br />BLOCKING, TYP <br />3/4" MIN. <br />3" DIA GROMMET (BLACK) <br />WHERE OCCURS <br />COUNTERTOP AS SCHEDULED <br />EQUIPMENT <br />WHERE OCCURS <br />2' <br /> <br />- <br /> <br />1 <br />0 <br />" <br /> <br />M <br />A <br />X <br />2' <br /> <br />- <br /> <br />6 <br />" <br />2' - 1" PER PLAN <br />4" BACK SPLASH <br />WHERE OCCURS <br />1 1/2" x 1 1/2" STEEL ANGLE 24" <br />VERTICAL LEG 18" HORIZONTAL LEG <br />FASTEN TO METAL STUDS @ 16" <br />O.C. W/#10 SCREWS @ 6" OC <br />4" BACKSPLASH WHERE <br />OCCURS <br />RUBBER TRASH/ <br />RECYCLING RECEPTACLE <br />BY CONTRACTOR <br />2' <br /> <br />- <br /> <br />1 <br />0 <br />" <br />PLAM INTEGRAL <br />DOOR/BASE <br />COUNTERTOP AS SCHEDULED <br />PLAM ON ALL INTERIOR <br />SURFACES <br />3/4" MDF DOORS W/ <br />PLAM ON ALL SIDES <br />HINGES-CONCEALED <br />SELF-CLOSING <br />OPENING W/ FINISHED PLAM <br />EDGES <br />2' <br /> <br />- <br /> <br />1 <br /> <br />1 <br />/ <br />4 <br />" <br />PTD. BRAKE MTL COLLAR <br />ALONG BOTTOM EDGE OF <br />OPENING <br />3" <br />4" <br />6 <br />1 <br />/ <br />4 <br />" <br />PULL AS SCHEDULED <br />MELAMINE LINER ON ALL <br />INTERIOR SURFACES OF <br />CABINET <br />3/4" MDF DOOR <br />COUNTERTOP AS SCHEDULED <br />PLASTIC TRASH BIN <br />BY CONTRACTOR <br />PULL OUT TRASH <br />DRAWER <br />FULL EXTENSION GLIDESPE <br />R <br /> <br />E <br />L <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />.2 <br />' <br /> <br />- <br /> <br />1 <br />0 <br />" <br />1 <br />1 <br />/ <br />2 <br />" <br />4" <br />2' - 1" <br />1. MILLWORK GENERAL NOTES APPLY TO ALL MILLWORK SHEETS. <br />2. BASE CABINETS: 25 INCHES DEEP, UNLESS NOTED OTHERWISE. <br />3. WALL CABINETS: 14 INCHES DEEP, UNLESS NOTED OTHERWISE. <br />4. TALL STORAGE UNITS TO BE 25 INCHES DEEP, UNLESS NOTED OTHERWISE. <br />5. PROVIDE ADJUSTABLE SHELVING IN CASEWORK, UNLESS NOTED OTHERWISE. <br />6. WHERE ELECTRICAL DEVICES ARE LOCATED IN CASEWORK, CASEWORK <br />CONTRACTOR SHALL PROVIDE FINISHED OPENINGS. COORDINATE LOCATION AND <br />QUANTITY WITH ELECTRICAL CONTRACTOR. <br />7. PROVIDE JOINT SEALANT AT PERIMETER JOINTS WHERE COUNTERTOPS, BACK <br />AND SIDE SPLASHES, CASEWORK, AND MILLWORK ABUT WALLS. <br />8. FIELD VERIFY DIMENSIONS OF CABINET LOCATIONS IN BUILDING PRIOR TO <br />FABRICATION. <br />9. PROVIDE FINISHED ENDS AT ALL EXPOSED ENDS OF CASEWORK AND MILLWORK. <br />10. ALL EXPOSED SURFACES IN OPEN SHELVING SHALL BE CLAD IN SAME MATERIAL AS <br />CABINET EXTERIOR. <br />11. PROVIDE LOCKS AT DOORS AND DRAWERS, UNLESS NOTED OTHERWISE <br />12. CABINET DOOR & DRAWER PULLS TO BE: (PROVIDE SPECIFICATION & FINISH) <br />MILLWORK GENERAL NOTES <br />SE <br />E <br /> <br />E <br />L <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />OPEN ABOVE <br />PLAM AT ALL EXPOSED SURFACES <br />SE <br />E <br /> <br />E <br />L <br />E <br />V <br />A <br />T <br />I <br />O <br />N <br />SEE PLAN PROVIDE 2" VALENCE <br />(UNDERCOUNTER LIGHT FIXTURE <br />WHERE OCCURS) <br />2 <br />3 <br />/ <br />4 <br />" <br />2 <br />3 <br />/ <br />4 <br />" <br />ADJUSTABLE PLASTIC LAMINATE <br />SHELVING <br />(E) ROOF STRUCTURE <br />3 5/8" 25 GA MTL. STUDS <br />DIAG. BRACING @48" O.C. <br />STAGGERED <br />CONT. 25 GA TOP TRACK SECURE <br />TO KICKERS SPACED EVERY 48 <br />IN. STAGGERED AT MAX. <br />SUSPENDED ACOUSTICAL <br />CEILING <br />"J" MOULDING <br />5/8" TYPE "X" GYP. BD. (MOUNTED <br />VER. EA. SIDE) ON 3 5/8" - 24 GA <br />MTL STUDS @ 16" O.C. <br />25 GA TRACK SECURE TO FLR. <br />CONST. W/ 0.157" X-U POWDER <br />ACTUADED FASTENERS @ 24" <br />O.C. 6" MIN. FROM END OR <br />SPLICES (ESR-2269) <br />(E) CONCRETE SLAB <br />NOTES: <br />1. PROVIDE SOUND TRAPS @ <br />ALL DUCT PENETRATIONS <br />AND SEAL AROUND ALL PIPES <br />& CONDUIT PENETRATIONS. <br />2. MTL STUDS TO BE <br />MANUFACTURED BY <br />MEMBERS OF THE STL. STUD <br />MFRS. ASSOC. (ESR-3064P) <br />3. PROVIDE METAL STUDS @ <br />12" O.C. FOR CABINET <br />HANGING REINF.10 <br />' <br />- <br />0 <br />" <br /> <br />C <br />L <br />G <br />. <br /> <br />H <br />T <br />. <br />45° <br />SUSPENDED ACOUSTICAL <br />CEILING <br />5/8" TYPE "X" GYP. BD. (MOUNTED <br />VER. EA. SIDE) ON 3 5/8" - 24 GA <br />MTL STUDS @ 16" O.C. <br />25 GA TRACK SECURE TO FLR. <br />CONST. W/ 0.157" X-U POWDER <br />ACTUADED FASTENERS @ 24" <br />O.C. 6" MIN. FROM END OR <br />SPLICES (ESR-2269) <br />(E) CONCRETE SLAB <br />NOTES: <br />1. PROVIDE SOUND TRAPS @ <br />ALL DUCT PENETRATIONS <br />AND SEAL AROUND ALL PIPES <br />& CONDUIT PENETRATIONS. <br />2. MTL STUDS TO BE <br />MANUFACTURED BY <br />MEMBERS OF THE STL. STUD <br />MFRS. ASSOC. (ESR-3064P) <br />3. PROVIDE METAL STUDS @ <br />12" O.C. FOR CABINET <br />HANGING REINF. <br />The purpose of this wal type is to <br />create a Window on the top, the <br />dimensions should be 2 feet, <br />opening from the ceiling grid and <br />down, and at the end of the wall <br />we have a 12-inch wall to be <br />supported with kickers. On the <br />window heather we have to have <br />a box heather to support the <br />expansion <br />WINDOW OPENING <br />5/8" TYPE "X" GYP. BD. ON CONT. <br />25 GA TOP TRACK <br />7' <br />- <br />0 <br />" <br /> <br />C <br />L <br />G <br />. <br /> <br />H <br />T <br />. <br />3' <br />- <br />0 <br />" <br />. <br />10 <br />' <br />- <br />0 <br />" <br /> <br />C <br />L <br />G <br />. <br /> <br />H <br />T <br />. <br />1' <br />- <br />0 <br />" <br />. <br />OP <br />E <br />N <br />I <br />N <br />G <br />2' <br />- <br />0 <br />" <br />. <br />12" IN. WALL TO BE <br />SUPPORTED BY <br />KICKERS. <br />BOX HEADER TO <br />SUPPORT EXPANSON <br />THESE PLANS ARE FOR REVIEW ONLY AND NOT FOR CONSTRUCTION UNLESS THEY <br />INCLUDE THE STAMP AND SIGNATURE OF ARCHITECT/ENGINEER AND THE <br />APPROVAL OF THE APPROPRIATE GOVERNMENT AGENCY <br />C-38176 <br />MARC A. <br />ABDELSAYED <br />RENEWAL <br />DATE <br />LICENSED A RCHITECT <br />STATE OF C ALIFORNIA <br />07/31/2025 <br />Scale <br />Date <br />Drawn By <br />Checked By <br />Project Number <br />REVISIONS <br />JOB SITE: <br />PLAN: <br />PHONE: <br />PLAN CHECK / JOB NO. <br />50 S De Lacey Ave. Unit #210 <br />Pasadena, CA 91105 <br />(760) 673-6837 <br />(760) 673-2550 <br />info@369architects.com <br />As indicated <br />4/ <br />9 <br />/ <br />2 <br />0 <br />2 <br />5 <br /> <br />3 <br />: <br />2 <br />5 <br />: <br />0 <br />9 <br /> <br />P <br />M <br />MILLWORK & CEILING <br />DETAILS <br />1414 W EDINGER AVE, SANTA <br />ANA, CA 92704 <br />CA <br />N <br />A <br />M <br /> <br />D <br />E <br />N <br />T <br />A <br />L <br />SA <br />N <br />T <br />A <br /> <br />A <br />N <br />A <br />Checker <br />J.F. <br />03/27/25 <br />24001 <br />1" = 1'-0"3 LOWER CABINET W/DOOR <br />1" = 1'-0"8 LOWER CABINET W/ACCESSIBLE SINK <br />1" = 1'-0"5 LOWER CABINET W/4 DRAWERS <br />1" = 1'-0"7 UPPER CABINET <br />3" = 1'-0"6 UPPER CABINET ANCHOR. @ BOTTOM <br />3" = 1'-0"1 BASE CABINET ANCHORAGE AT BASE <br />3" = 1'-0"2 BASE CABINET ANCHORAGE AT TOP <br />1" = 1'-0"4 LOWER CABINET W/4 DRAWERS <br />1" = 1'-0"9 LOWER CABINET W/ACCESSIBLE SINK <br />1" = 1'-0"10 LOWER CABINET W/ACCESSIBLE SINK <br />1" = 1'-0"11 UPPER CABINET <br />1 1/2" = 1'-0"13 <br />CEILING CONNECTION WITH PARTITION <br />WALL W-7 <br />1 1/2" = 1'-0"12 <br />CEILING CONNECTION WITH PARTITION <br />WALL W-8 <br />No. Description Date <br />1 PLAN CHECK 1 02/06/25 <br />2 PLAN CHECK 2 03/25/25 <br />2
The URL can be used to link to this page
Your browser does not support the video tag.