|
CALL TOLL FREE 1 (800) 227-2600
<br />TWO WORKING DAYS BEFORE YOU DIG
<br />REVISIONS
<br />NO. DATE DESCRIPTION NO. DATE DESCRIPTION
<br />CONTRACTOR:
<br />CORONA CONSTRUCTION CO.
<br />615 E. ALLEN AVE.
<br />SAN DIMAS, CA 91773
<br />PHONE: 626-926-7487
<br />CA. LIC. #797455 CLASS A-B-HAZ C10
<br />EXPIRES 07/31/2025
<br />TITLE SHEET
<br />SITE ADDRESS:
<br />UNITED PACIFIC #5669
<br />1913 W EDINGER AVE.
<br />SANTA ANA, CA 92704
<br />SCALE:
<br />DRAWN BY:
<br />DATE:
<br />JOB NO.
<br />DRAWING NO.
<br />CHECKED BY:
<br />AS NOTED
<br />ETHAN BUI
<br />7/19/23
<br />5669
<br />TITLE
<br />ALVARO CORONA
<br />SHEET
<br />T1
<br />UNITED PACIFIC #5669
<br />UNDERGROUND STORAGE TANK INSTALLATION
<br />(SEE SHEET F-1 FOR SCOPE OF WORK)
<br />1913 W EDINGER AVE.
<br />SANTA ANA, CA 92704
<br />T1
<br />DRAWING NAME
<br />TITLE SHEET
<br />SITE PLAN & SCOPE OF WORK
<br />UST INSTALLATION NOTES
<br />UST AND SUMP DETAILS
<br />DETAILS AND LIST OF EQUIPMENT
<br />DRAWING INDEX
<br />SHEET #
<br />F1
<br />F2
<br />F3-1
<br />F4-2
<br />SITE ELECTRICAL CONDUIT PLANF5
<br />ELECTRICAL NOTESF6
<br />VEEDER ROOT ELECTRICALF7
<br />ELECTRICAL DETAILSF8
<br />B
<br />A
<br />C
<br />D
<br />E
<br />F
<br />G
<br />H
<br />I
<br />J
<br />B
<br />A
<br />C
<br />D
<br />E
<br />F
<br />G
<br />H
<br />I
<br />J
<br />2 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<br />21 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
<br />LICENSED CONTRACTOR
<br />STATE OF CALIFORNIA
<br />CORONA CONSTRUCTIONCO.
<br />797455
<br />EXPIRES 07/31/2025
<br />GENERAL NOTES
<br />SUMMARY:
<br />1. PROVIDE ALL LABOR. MATERIAL EQUIPMENT AND SYSTEMS REQUIRED FOR FULL PERFORMANE AND COMPLETION OF WORK AS SHOWN ON THE
<br />DRAWINGS, SPECIFIED HEREIN AND AS REQUIRED FOR THE CONSTRUCTION OF A COMPLETE, OPERATIONAL, SERVEABLE TURN-KEY PROJECT.
<br />2. THESE GENERAL REQUIERMENTS APPLY TO ALL SECTIONS OF THESE SPECIFICATIONS AS IF STATED SEPARATELY IN EACH SECTION.
<br />CONSTRUCTION DOCUMENTS:
<br />1. EXAMINE THE CONSTRUCTION DOCUMENTS INCLUDING THESE NOTES, THE DRAWINGS, DETAILS, PERMITS, ALL EQUIPMENT MANUFACTURER
<br />SPECIFICATIONS/INSTALLATION INSTRUCTIONS AND BID DOCUMENTS.
<br />2. READ THE SPECIFICATOINS.
<br />3. VISIT THE SITE OF THE WORK.
<br />4. ADDRESS ANY AND ALL QUESTIONS REGARDING THE CONSTRUCTION DOCUMENTS TO THE OWNER FOR INTERPRETATION.
<br />5. BECOME THOROUGHLY ACQUAINTED WITH ALL REQUIREMENTS OF THE PROJECT, EXISTING CONDITIONS, AND LIMITATIONS UNDER WHICH THE
<br />WORK SHALL BE EXECUTED, BIDS SHALL REFLECT A SUM TO COVER THE COST OF ALL ITEMS REQUIRED TO PERFORM THE WORK AS SET FORTH IN
<br />THE CONSTRUCTION DOCUMENTS. NO ALLOWANCE WILL BE MADE FOR THE LACK OF EXAMINATION OR KNOWLEDGE OF THE PROJECT. SUBMISSION
<br />OF A BID SHALL BE CONSIDERED AS CONCLUSIVE EVIDENCE THAT THE BIDDER HAS MADE A THOROUGH EXAMINATION. CHANGE ORDERS FOR
<br />DISCREPANCIES ONCE CONSTRUCTION HAS STARTED WILL NOT BE ALLOWED.
<br />6. CONSTRUCTION DOCUMENTS CONSIST OF THE PERMIT SET OF PLANS (DRAWINGS), SPECIFICATIONS AND SUPPLEMENTAL DOCUMENTS ISSUED TO
<br />DEFINE THE NATURE AND SCOPE OF THE PROJECT.
<br />7. THESE CONSTRUCTION DOCUMENTS (DRAWINGS AND SPECIFICATIONS) HAVE BEEN PREPARED TO DEFINE THE INSTALLATION OF NEW
<br />UNDERGROUND STORAGE TANKS, PIPING AND DISPENSERS. SEE SHEET F1 FOR COMPLETE SCOPE OF WORK.
<br />8. WRITTEN DIMENSIONS AND NOTATIONS SHALL TAKE PRECEDENCE OVER SCALED DIMENSIONS AND DRAWING CONFIGURATIONS. DO NOT SCALE
<br />DRAWINGS.
<br />9. WORK NOT DETAILED OR SPECIFIED SHALL BE SAME QUALITY AND TYPE AS WORK DETAILED OR SPECIFIED AS REQUIRED FOR THE CONSTRUCTION
<br />OF A COMPLETE AND SERVICEABLE PROJECT.
<br />10. ALL INSTRUCTIONS NOTED IN THE CONSTRUCTION DOCUMENTS ARE ADDRESSED DIRECTLY TO THE GENERAL CONTRACTOR AND ARE THE
<br />RESPONSIBILITY OF THE GENERAL CONTRACTOR.
<br />11. VERIFY ALL DIMENSIONS AND CONDITIONS ON THE SITE.
<br />12. REPORT IMMEDIATELY IN WRITING TO THE OWNER ANY AND ALL DISCREPANCIES FOUND OR PERCEIVED TO EXISTING BETWEEN DRAWINGS,
<br />SPECIFICATIONS, AND SITE CONDITIONS EITHER EXISTING OR CREATED.
<br />13. THE CONTRACTOR SHALL VERIFY ALL EXISTING CONDITIONS AND THE CONTRACTOR SHALL INFORM THE OWNER IN WRITING OF ALL DISCREPANCIES
<br />AND DEVIATIONS FROM INFORMATION PRESENTED ON THESE DRAWINGS AND SPECIFICATIONS. EXAMINE THE AREAS AND CONDITIONS UNDER
<br />WHICH WORK WILL BE PERFORMED. CORRECT CONDITIONS DETRIMENTAL TO TIMELY AND PROPER COMPLETION OF THE WORK. DO NOT PROCEED
<br />UNTIL UNSATISFACTORY CONDITIONS ARE CORRECTED. THE BUILDER AND ALL SUBCONTRACTORS SHALL FAMILIARIZE THEMSELVES WITH THESE
<br />DOCUMENTS. IT IS THE INTENT OF THESE PLANS THAT THE CONTRACTOR PROVIDE A COMPLETE “TURN-KEY” PROJECT AND THAT NO CHANGE
<br />ORDERS WILL BE ISSUED FOR DISCREPANCIES ONCE CONSTRUCTION HAS STARTED.
<br />14. WHERE A DISCREPANCY IS NOTED PRIOR TO BIDDING, THE OWNER SHALL RENDER A DECISION AND ESTABLISH THE PRECEDENCE OF THE
<br />INFORMATION IN QUESTION PRIOR TO CONSTRUCTION.
<br />15. MAINTAIN A COMPLETE SET OF CONSTRUCTION DOCUMENTS, AS-BUILT INSTALLED. CHANGES IN DESIGN, INCLUDING DIMENSIONS AND
<br />PHOTOGRAPHS OF ALL UNDERGROUND INSTALLATIONS.
<br />16. RETURN MARKED UP CONSTRUCTION DOCUMENTS, AS-BUILT DOCUMENTS TO THE OWNER AT SUBSTANTIAL COMPLETION.
<br />17. RETURN ALL DRAWINGS AND SPECIFICATIONS FURNISHED BY OWNER AT COMPLETION OF WORK. DRAWINGS AND SPECIFICATIONS ARE OWNERS'
<br />PROPERTY AND SHALL BE RETURNED.
<br />18. THE TERM “PRODUCT” INCLUDES MATERIALS, SYSTEMS, AND EQUIPMENT. THE TERM “PROVIDE” INCLUDES FURNISHING AND INSTALLING A PRODUCT,
<br />COMPLETE IN PLACE, OPERATING, TESTED, AND APPROVED. THE TERM “BUILDING CODE” AND THE TERM “CODE” REFER TO PUBLISHED
<br />REGULATIONS OF GOVERNMENTAL AGENCIES HAVING JURISDICTION. THE TERMS “APPROVED”, “REQUIRED” AND “AS DIRECTED” REFER TO AND
<br />INDICATE THE WORK OR MATERIALS THAT MAY BE APPROVED, REQUIRED OR DIRECTED BY THE ARCHITECT ACTING AS THE AGENT OF THE OWNER.
<br />THE TERM “SIMILAR”, MEANS IN ITS GENERAL SENSE AND NOT NECESSARILY IDENTICAL. THE TERMS “SHOWN”, “INDICATED”, “NOTED”, “SCHEDULED”,
<br />AND TERMS OF SIMILAR IMPORT, REFER TO REQUIREMENTS CONTAINED IN THE CONTRACT DOCUMENTS.
<br />19. COMPLY WITH ALL LAWS, CODES, ORDINANCES AND REGULATIONS WHICH APPLY TO THIS PROJECT.
<br />20. RESOLVE ALL DEVIATIONS BETWEEN DRAWINGS AND SPECIFICATIONS AND ANY LAWS, CODES, ORDINANCES, OR REGULATIONS OF GOVERNMENTAL
<br />AGENCIES HAVING JURISDICTION BEFORE INSTALLATION OF WORK IN QUESTION PRIOR TO THE START OF CONSTRUCTION.
<br />CONTROL OF SITE:
<br />1. THE SITE WILL BE AVAILABLE TO THE CONTRACTOR SUBSEQUENT TO RECEIPT OF THE OWNER'S WRITTEN NOTICE TO PROCEED. CARE, CUSTODY,
<br />AND CONTROL OF THE SITE WITHIN THE LIMITS SET FORTH ON THE DRAWINGS ARE THE RESPONSIBILITY OF THE CONTRACTOR FOR THE DURATION
<br />OF THE AGREEMENT.
<br />2. ORGANIZE AND PERFORM WORK SO THAT THE OPERATIONS OF EXISTING FACILITIES AND ADJOINING PROPERTY OWNERS CAN CONTINUE
<br />NORMALLY AND WITH A MINIMUM OF INTERRUPTIONS.
<br />3. PROTECT EXISTING CONSTRUCTION IDENTIFIED TO REMAIN INCLUDING, BUT NOT NECESSARILY LIMITED TO EXISTING LANDSCAPING, EARTHWORK,
<br />ADJOINING PROPERTY, STREET, ETC... FROM DAMAGE AND GIVE PROPER WRITTEN NOTICE OF PROPOSED WORK TO ADJOINING PROPERTY
<br />OWNERS.
<br />4. REPAIR ALL DAMAGE TO ADJOINING PROPERTIES CAUSED BY OPERATIONS OF THIS PROJECT TO THE SATISFACTION OF THE OWNER'S
<br />REPRESENTATIVE.
<br />5. PROTECT COMPLETED WORK FROM DAMAGE UNTIL ACCEPTED BY OWNER.
<br />6. PROVIDE SITE BARRIERS AND SECURITY FENCING TO ISOLATE THE SITE FORM THE GENERAL PUBLIC AND CONTROL SITE ACCESS AT ALL TIMES.
<br />7. PROVIDE ALL SAFETY SIGNAGE POSTED IN CONSPICUOUS LOCATIONS AS REQUIRED BY ALL GOVERNMENTAL AGENCIES HAVING JURISDICTION,
<br />INCLUDING BUT NOT NECESSARILY LIMITED TO OSHA, U.S. DEPT. OF LABOR, CITY BUILDING DEPARTMENT, LOCAL FIRE AND FOR TRAFFIC CONTROL.
<br />8. PROVIDE DEMOLITION AND CLEAR THE SITE IN COMPLIANCE WITH LOCAL BEST MANAGEMENT PRACTICES.
<br />9. MAINTAIN SITE IN ACCESSIBLE CONDITION FOR ALL SUBCONTRACTORS.
<br />ACCESSIBLITY NOTES:
<br />1. WALKS AND SIDEWALKS SUBJECT TO THESE REGULATIONS SHALL HAVE A CONTINUOUS COMMON SURFACE, NOT INTERRUPTED BY STEPS AND
<br />SHALL BE A MINIMUM OF 48 INCHES IN WIDTH.
<br />2. SURFACES WITH A SLOPE OF LESS THAN 6 PERCENT GRADIENT SHALL BY AT LEAST AS SLIP-RESISTANT AS THAT DESCRIBED AS A MEDIUM SALTED
<br />FINISH.
<br />3. SURFACES WITH A SLOPE OF 6 PERCENT GRADIENT OR GREATER SHALL BE SLIP RESISTAN.
<br />4. SURFACE CROSS SLOPES SHALL NOT EXCEED ¼ INCH PER FOOT.
<br />5. ABRUPT CHANGES IN LEVEL ALONG ANY ACCESSIBLE ROUTE SHALL NOT EXCEED ½ INCH. WHEN CHANGES IN LEVEL DO OCCUR, THEY SHALL BE
<br />BEVELED WITH A SLOPE NO GREATER THAN 1:2 EXCEPT THAT LEVEL CHANGES NOT EXCEEDING ¼ INCH MAY BE VERTICAL.
<br />6. ALL ACCESSIBLE ENTRANCES SHALL BE IDENTIFIES WITH AT LEAST ONE STANDARD SIGN AND WITH ADDITIONAL DIRECTIONAL SIGNS AT
<br />INACCESSIBLE, AS REQUIRED, VISIBLE FROM APPROACHING PEDESTRIAN WAYS.
<br />7. EVERY REQUIRED ENTRANCE OR PASSAGE DOORWAY SHALL BE OF A SIZE AS TO PERMIT THE INSTALLATION OF A DOOR NOT LESS THAN 6 FEET, 8
<br />INCHES IN HEIGHT. DOORS SHALL BE CAPABLE OF OPENING AT LEAST 90 DEGREES AND SHALL BE SO MOUNTED THAT THE CLEAR WIDTH OF THE
<br />DOORWAY ISN'T LESS THAN 32 INCHES, ALL DOORS SHALL SWING OUTWARD IN THE PATH OF TRAVEL TO EXIT.
<br />8. THE MAXIMUM SLOPE OF ACCESSIBLE PARKING AND PASSENGER LOADING ZONE SURFACE AND ANY DIRECTION SHALL NOT EXCEED 2% PER ADA
<br />ACCESSIBILITY STANDARDS. THE MAXIMUM SLOPE AT THE PASSENGER LOADING ZONE SHALL NOT EXCEED 2%.
<br />9. NEW SCOPE OF WORK NOT TO AFFECT EXISTING ACCESSIBLE PATH OF TRAVEL. SEE SHEETS F1 & F5.
<br />CODES AND STANDARDS:
<br />APPLICALBE CODES, STANDARDS AND SPECIFICATIONS INCLUDE, BUT ARE NOT LIMITED TO, THE FOLLOWING:
<br />1. NATIONAL FIRE PROTECTION ASSOCIATION, VOL. 30, “FLAMMABLE AND COMUSTIBLE LIQUIDS CODE”.
<br />2. FEDERAL CODE OF REGULATIONS (CFR), PARTS 280-281
<br />3. CALIFORNIA HEALTH & SAFETY CODE, CHAPTER 6.7.
<br />4. CALIFORNIA CODE OF REGUALTIONS (CCR) TITLE 23 (CALIFORNIA UST REGULATIONS)
<br />5. NATIONAL INSTITUTE FOR OCCUPATIONAL SAFETY AND HEALTH, NIOSH, “WORKING IN CONFINED SPACE”.
<br />6.
<br />7. DEPARTMENT OF TRANSPORTATION REGULATIONS 49 CFR, PARTS 171 THROUGH 180.
<br />8. TITLE 22 CALIFORNIA CODE OF REGULATIONS, DIVISION 4.5, CHAPTER 32, SECTION 67383.
<br />9. SOUTH COAST AIR QUALITY MANAGEMENT DISTRICT REGULATIONS - RULES 1166 AND 1149.
<br />10. NATIONAL FIRE PROTECTION ASSOCIATION, NFPA 70, NATIONAL ELECTRICAL CODE, ARTICLES 500 THROUGH 516.
<br />11. ORANGE COUNTY ENVIRONMENTAL DIVISION (CUPA) REQUIREMENTS.
<br />12. REQUIREMENTS OF THE CITY OF SANTA ANA BUILDING AND SAFETY DEPARTMENT.
<br />13. ASTM STANDARD DOCUMENT D4021-92.
<br />14. FACTORY MUTUAL SYSTEMS APPROVAL FOR DOUBLE WALL J.I. IM7A0.AF.
<br />15. THE LATEST EDITION OF THE CALIFORNIA FIRE CODE.
<br />16. THE EQUIPMENT MANUFACTURERS INSTALLATIONS INSTRUCTIONS AND SPECIFICATIONS.
<br />17. CAL OSHA REGULATIONS FOR EXCAVATIONS AND CONFINED SPACE. CAL OSHA PERMIT IS REQUIRED FOR EXCAVATION 5' OR DEEPER.
<br />18. LATEST EDITION OF THE CALIFORNIA BUILDING CODE.
<br />19. CALIFORNIA CODE OF REGULATIONS, TITLE 23, DIVISION 3, CHAPTER 16, UNDERGROUND TANK REGULATIONS.
<br />20. CALIFORNIA HEALTH AND SAFTEY COD, CHAPTER 6.7, UNDERGROUND STORAGE OF HAZARDOUS SUBSTANCES.
<br />21. PEDESTRIAN PROTECTION DURING CONSTRUCTION SHALL BE PROVIDED PER CBC SEC. 3306.
<br />22. DISPENSERS SHALL COMPLY WITH 2013 CBC, CHAPTER 1, SECTION 111B-220.2.
<br />QUALITY ASSURANCE AND WARRANTIES:
<br />1. MAINTAIN A COPY OF APPROVED DRAWINGS, CUPA PERMIT AND FIRE PERMIT WITH ADDENDA AT THE JOB SITE DURING ALL CONSTRUCTION
<br />ACTIVITIES THROUGH RECEIPT OF FINAL INSPECTION.
<br />2. PROVIDE WRITTEN GUARANTEE AGAINST DEFECTS IN MATERIALS, EQUIPMENT, OR WORKMANSHIP OF THIS CONTRACTOR FOR ONE YEAR FROM
<br />DATE OF SUBSTANTIAL COMPLETION AS ESTABLISHED BY RECEIPT OF CERTIFICATE OF OCCUPANCY, ITEMS CARRYING MANUFACTURERS'
<br />WARRANTEES OF LONGER DURATION SHALL COMMENCE CONCURRENT WITH THE CONTRACTORS GUARANTEE.
<br />3. PROVIDE MATERIALS AND EQUIPMENT OF BRANDS AND GRADES WHICH ARE SPECIFIED AND INCLUDED TO ESTABLISH TYPE AND QUALITY
<br />REQUIREMENT. THESE BRANDS AND GRADES SHALL BE APPROVED BY THE OWNER AS SPECIFIED.
<br />4. IT IS THE RESPONSIBILITY OF THE PARTY REQUESTING SUBSTITUTION TO PROVIDE PRODUCTS REPRESENTED AS EQUAL WITH DOCUMENTATION
<br />OF EQUALITY.
<br />5. PROVIDE QUALIFIED, RESPONSIBLE REPRESENTATIVE ON SITE AT ALL TIMES THROUGH SUBSTANTIAL COMPLETION, WHO UNDERSTANDS,
<br />SPEAKS, AND WRITES ENGLISH FLUENTLY.
<br />6. UTILIZE ADEQUATE NUMBERS OF SKILLED PERSONNEL WHO ARE THOROUGHLY TRAINED AND EXPERIENCED IN THE NECESSARY CRAFTS AND
<br />WHO ARE COMPLETELY FAMILIAR WITH THE SPECIFIED REQUIREMENTS AND THE METHODS NEEDED FOR PROPER PERFORMANCE OF THE WORK
<br />OF THIS SECTION.
<br />7. PROVIDE WORKMANSHIP OF GOOD QUALITY, ACCEPTABLE TO THE OWNER OR THE OWNER'S REPRESENTATIVE AND MEETING THE “INDUSTRY
<br />STANDARD” FOR THE TYPE OF WORK SHOWN ON THE DRAWINGS OR SPECIFIED HEREIN.
<br />8. THE CONTRACTOR IS SOLELY RESPONSIBLE FOR CONSTRUCTION LAYOUT AND SCHEDULING, AND COORDINATING ALL PORTIONS OF THE WORK,
<br />AND SHALL REQUIRE HIS SUBCONTRACTORS TO PROMPTLY NOTIFY HIM OF THEIR LAYOUT AND SCHEDULING NEEDS.
<br />9. EMPLOY SKILLED PERSONNEL TO PERFORM BUILDING LAYOUT INCLUDING OVERALL WIDTH, LENGTH, AND HEIGHT AND SUCH SPECIFIC GRADES,
<br />LINES, AND LEVELS AS SHOWN ON THE PROJECT DOCUMENTS.
<br />10. ESTABLISH AND MAINTAIN ALL LINES, LEVELS, AND GRADES SHOWN ON DRAWINGS OR OTHERWISE REQUIRED.
<br />11. ELEVATIONS NOTED ARE REFERENCED TO BENCHMARKS SHOWN ON BUILDING PLANS.
<br />12. COORDINATE THE SCHEDULING OF ALL INSTALLATIONS TO FACILITATE THE TIMELY PROCESS OF THE WORK WITHOUT REMOVAL OF ANY
<br />INSTALLED CONSTRUCTION.
<br />TESTING, SAFETY AND INSPECTIONS:
<br />1. PROVIDE TESTS AND/OR INSPECTIONS AS SPECIFIED ON THE DRAWINGS AND SPECIFICATIONS AND AS MAY ADDITIONALLY BE REQUIRED DURING
<br />THE COURSE OF CONSTRUCTION.
<br />2. PROVIDE TESTING BY A RECOGNIZED REPUTABLE TESTING AGENCY.
<br />3. MAKE SUBMITTALS OF ALL MATERIAL SAFTEY DATA SHEETS (MSD'S) FOR ALL MATERIALS AND PRODUCTS IN OR ON THIS PROJECT.
<br />4. SUBMITTALS SHALL BE MADE FOR AS MANY MATERIALS AS POSSIBLE BEFORE THE START OF THE WORK.
<br />5. MAINTAIN A COMPLETE THREE RING BINDER AT THE JOB SITE CONTAINING MANUFACTURER INSTALLATION, OPERATION, AND MAINTENANCE
<br />MANUALS. BINDER SHALL BE PROVIDED TO THE OWNER AT COMPLETION OF THE PROJECT.
<br />6. MAKE THE BINDER AVAILABLE TO ALL WORKERS, SAFETY PERSONNEL, INSPECTORS, SUBCONTRACTORS AND THE OWNER.
<br />7. CONDUCT REGULAR SAFETY MEETINGS AND DISCUSS WITH PERSONNEL THE SPECIFICS RELATIVE TO ALL ON GOING MATERIALS AND PRODUCT
<br />USAGE.
<br />8. SCAQMD TESTING SHALL BE PROVIDED IN ACCORDANCE WITH EXECUTIVE ORDER VR-204-Q.
<br />9. PROVIDE SB-989 TESTING AND PROVIDE A NEW MONITORING SYSTEM CERTIFICATION PRIOR TO FINAL INSPECTION.
<br />MATERIALS AND EQUIPMENT:
<br />1. COORDINATE AND EXPEDITE PROCUREMENT OF MATERIALS AND EQUIPMENT.
<br />2. STORE MATERIALS BLOCKED OR ON PLATFORMS ABOVE GROUND AND STORE IN A MANNER THAT WILL PROTECT UNITS FROM CONTACT WITH
<br />SOIL AND EXPOSURE TO WEATHER.
<br />3. EXERCISE CARE IN HANDLING MATERIALS AND OPERATION OF EQUIPMENT TO PREVENT DAMAGE.
<br />4. LOCATE STORAGE AREAS WHERE THEY WILL NOT BE DISTURBED OR DAMAGED BY CONSTRUCTION OPERATIONS.
<br />5. STOCKPILE MATERIALS SUFFICIENTLY IN ADVANCE OF NEED TO ASSURE THEIR AVAILABILITY IN A TIMELY MANNER FOR THIS WORK.
<br />6. MAKE AS MANY TRIPS TO THE JOB SITE AS ARE NEEDED TO DELIVER MATERIALS FOR THIS PROJECT IN A TIMELY MANNER TO ENSURE ORDERLY
<br />PROGRESS OF THE WORK.
<br />7. DO NOT PERMIT MATERIALS NOT COMPLYING WITH THE PROVISIONS OF THESE SPECIFICATIONS TO BE BROUGHT ONTO OR TO BE STORED AT
<br />THE JOB SITE.
<br />8. REMOVE PROMPLTY NON-COMPLYING MATERIALS FROM THE JOB SITE AND REPLACE WITH MATERIALS MEETING THE REQUIREMENTS OF THIS
<br />SECTION.
<br />9. IT SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR TO PROVIDE SECURE, LOCKABLE STORAGE FOR ALL CONSTRUCTION MATERIALS AND
<br />EQUIPMENT. REPLACEMENT AFTER RECEIPT SHALL BE BY THE CONTRACTOR.
<br />10. THE CONTRACTOR SHALL TAKE RECEIPT OF ALL OWNER SUPPLIED EQUIPMENT, CONFIRM MADEL AND QUANTITY AND NOTIFY OWNER OF ANY
<br />DISCREPANCIES.
<br />CLEAN UP AND ADJUSTMENT:
<br />1. CLEAN ALL AREAS OF THE FACILITY AFFECTED BY THE PROJECT.
<br />2. REMOVE ALL DEBRIS AND LEAVE PREMISES BROOM CLEAN.
<br />3. CLEAN AND POLSIH ALL GLASS AND PLUMBING, INCLUDING FIXTURES.
<br />4. WIPE CLEAN AND POLISH FACILITY EQUIPMENT (PUMPS/DISPENSERS, SIGNS, SHELVING, COOLERS, LIGHTS, AND NEW EQUIPMENT IN
<br />CONSTRUCTION DISTRUVED AREAS, ETC.).
<br />5. EXERCISE CAUTION TO AVOID DAMAGING OR STAINING PAINT, CONCRETE, TILE, ETC.
<br />6. THE CONTRACTOR IS RESPONSIBLE FOR CORRECTIONG ALL DAMAGE UP TO SUBSTANTIAL COMPLETION.
<br />DETAILS AND LIST OF EQUIPMENTF4-1
<br />F3-2 UST AND SUMP DETAILS
<br />ELECTRICAL DETAILSF9
<br />1 5/14/24 UPDATED DRAWING INDEX. ADDED CAL OSHA NOTE.
<br />1
<br />1
<br />SIGNED 5/14/24
<br />1
<br />1
<br />ADDED DISABLED ACCESS COMPLIANCE DOCUMENT
<br />SHORING DETAILSF10
<br />Bldg# 101118671
<br />Elec# 20182410
<br />
<br />APPROVALS:
<br />PLNG - ASevilla
<br />BLDG - CSG Consultant
<br />ELEC - CSG Consultant
<br />1913 W Edinger Ave -
<br />101118671 & 201824107/2/2024
|