Laserfiche WebLink
MJ-1260, MJ-2460.' <br />INSTALLATION INSTRUCTIONS FOR OUTL <br />1. All powea supplies have a single output (MJ-1260&MJ-2460) that complies with ---, <br />Class 2 output requirements.uu.sai -1-11- /MS+a <br />2. The maximum rated outputpower for MJ-1260 and MJ-2460 is 60 watts. 0 <br />Jurenobitox€ LJI /SUPPLY <br />1_tra AC INPUI <br />3. Power supply spacing to other heat producing components shall be minimun; 4 3 l.... EA <br />6.ULLISIED 1.-· <br />inches when minimum spacing to sidewalls and top of enclosure is kept at.·Fig. 1 <br />minimum 2 inches. <br />4. All power supplies can be used in indoor locations. <br />POWER <br />5. When junction box is notprovided:SUFFIX DC OUTPI <br />./4@ AC input:L'tv•.6,0 idD <br />® Conduit fittings shall be used; UL listed threaded on to power supply.9 FITTTNG <br />MErrALUC <br />FITTING 1 <br />Fig. 2bracket,liquid tight, metallic, provided for connection to the AC circiif1 PUCCUR(Fig.l). 1. SUNRES,SlANT1 4@ The use ofa ULlistedjunction box suitable foruse in wetlocations is POWER <br />SUPPLY <br />DCOUTFU *ZEZ LIQUIDL TIGHTrequired(Fig.1).SPL tCE <br />ULLISTED* DC output:FITrING <br />e Conduit fittings shall be used: UL Listed Heyco LTF 1/2, ANC industrial Fig. 3 <br />FGA13-08 or equivalent (Fig.2,3). <br />® Outputcordmustberatedandmarked PLTCorCL3Ror"Sun pJUNCTION >Pak. <br />Resistant " (Fig.3).2M4029& <br />e DC output wires splicing must be done inside ofliquid tight enclosure or ULUSTED j <br />using liquid tight terminals and leads are rated and marked PLIC or CL3R 'W22 Fig. 4 <br />or" Sun Resistant" (Fig.2,3). <br />6.When junction box is provided:0 <br />@ AC input: <br />JUNCTION /POWER <br />BOX /SUPPLY <br />\ AC INPUT <br />@ Conduit fittings shall be used; UL listed, threaded on to power supply, METALLIC 2EEEEEZULLISTED O ZEZEZEZEEZE <br />liquid tight, metallic, provided for connection to the AC circuit (Fig. 4,5). <br />® DC output: <br />® Conduit Sttings shall be used: ULListed Heyco I.TF 1/2, AVC industrial Fig. 5 <br />FGA13-08 or equivalent (Fig.6). <br />e Output cord must be rated and marked PLTC or CL3R or" Sun Resistant" <br />(Fig.6).PLTC <br />7. Any unused threaded conduit opening on power supply must be covered with a CUR <br />| SUN RESISTANT <br />Al}:CnOM <br />ULlisted metallic conduit cap.POWER \BOX <br />SUPPLY 1 <br />8, Disclaimer: <br />DC OUTPUT /21 \ <br />® All above installation methods are recommended by manufacturer.ULUSTED <br />Fig. 6 ATENG <br />® All installation should follow and comply with local NEC regulations. <br />FrrrING <br />V <br />LOCATIONS <br />1