10180248_800 E. DYER - Plan - Laserfiche WebLink

Home Browse Search

Ffi»2465*346=ix*34¢4%51}-634*4-9%0231#6*31%42***49*t-*'5-' - flbft»,172-f-ls,tj -=-L-7 1 - .2 . -r -5-04-2 5/#1&i/&,i.9410.Z/ji1515:22/Vialiptifth.+343#i#FMjaH:i:Ii.337*44.... - - 'i- 1.-=. i:*.4- -3--i f 9 1117 1-»2-0..€*h E'- i,@41 rf--4..6 2022?.111'-"iff¢'4.2 ,£,<*:5545pr - - -0-@IL,4&92 Jf-%-2 *R-=--:, I-'I:T#fi--#J-4;=AIT,:---53 1 -7-IIIS,34*I,3--I::Hyu :24,t?.1.k.tlpir ko -9ft-Dh3--*-3-13 t' 4 5.%%:GR(316€f*44142311«9>- @-4141 1---r".ji--tam,·,I.72712- 3 1 -c b -7....ii!.... 111 r=,-245 7 -t; 4-11= SIGN TYPE:CHANNEL LETTERS Customer / Job Name: Job Address : INSTALLATION INSTRUCTIONS : 1. Please reference the approved drawings, and check to make sureyou have all the required sign parts, hardware and components.2. Make sure all required components have UL labels, prior to leaving facility. 3. Once on-site, make sure the work area is secure and safe.4. Reference your city approved plans, to determine the sign location.5. Locate the dedicated primary power, and disconnect at the breaker panel.6. Set the required equipment in place, for accessing the sign location.NOTE: Please reference OSHA codes, to determine the correct methods. 7. Install patterns and templates as needed, to the fascia surface.NOTE: Check the backside of the fascia for obstructions, prior to drilling any penetrations through the fascia/wall.8. Drill all required mounting and electrical holes in fascia.9. Mount letters to fascia, while sealing all penetrations with sealant.10. Feed secondary wiring through fascia, through approved insulators.11. Make all secondary wire connections behind the fascia, with UL approved components.12. Mount power supplies inside soffit area, and connect them to the secondarywires as per instructions provided by the power source manufacturer.13. Connect the power supplies to existing dedicated primary power source.NOTE: Connect as per NEC Codes. (Ensure a proper ground is in place)14. Check to see that all letters are illuminating, and secure faces as needed.15. Clean areas inside soffit, and clean exterior area, prior to leaving job-site. NOTE: Installation to be performed by a licensed contractor. NOTE: Installation requirements may vary due to local city code requirements. ii Additional comments specific to this project: !j All electrical signs are: /GN § For more information, please contact our office @ 714-891-5682 %9Approved &,1 11411!-ii# fo.2; 'i,hi¢.:LIPS·Wjil,;%141%%*14'i '01 414-..i