Laserfiche WebLink
November 14,2012 SIGN COMPONENTS MANUAL (SAM)73 <br /> 71 (160)1.1788.73 <br />;AL./Fiber Glass 71 (160) ..1442.54 <br />,AL./ABS ! 71 (160) i 590.99 <br />ISS./SS. 71(160) 1 1823.39 1 <br />EFiber Glass/Fiber Glass I 71 (160) 1 1142.78 <br />;Fiber Glass/ABS Plastic i 71 (160) 1 616.40 j <br />G?t- Ngs. 44329€s.»:- <br />; Substrate Max Operating Temp. C (a !As-Received Bond Strength (PSI) <br />}AL./AL.71 (160) ' 1739.64 <br />iAL./SS.71 (160) i 1760.05 <br />[AL./Fiber Glass 71 (160) 1 976.14 <br />TALJABS 71 (160) f 618.89 <br />71 (160)- 1 1788.74 <br />{Fiber Glass/Fiber Glass 71 (160) 1 835.56 <br />EFiker Glass/ABS Plastic ._ _71 (160) i _-609.9 <br />Cat. Nos. MA420FS Black: <br />€ubstrate <br />*AL./AL <br />:ALJSS. <br />AL./Fiber Glass <br />'AL./ABS <br />iSSJSS. <br />fFiber Glass/Fiber Glass <br />}Fiber Glass/ABS Plastic <br />Max Operating Temp. C (F) i As-Received Bond Strength (PSI) <br />71 (160) . 1636.69 <br />71 (160) i 1766.58 <br />71 (160) I 1280.51 <br />71 (160) i 507.37 <br />71 (160)1 1965.15 <br />71 '160) 1025.53 <br />71 (160) 4 503.85 <br />Substrate <br />Cat. N?s. MA823GB: <br />Max Operating Temp. C (F) 1 As-Received Bond Strength (PSI) i <br />fAVAL.71 (160) <br />:AL./SS.71(160) 1 <br />?AL./Fiber Glass 71(160) 1 <br />AL./ABS 71 (160) <br />iss./SS.71 (160) t <br />·Fiber Glass/Fiber Glass 71 (160) ! <br />Fiber Glass/ABS Plastic 71 (160) ] <br />1572.20 <br />1775.92 <br />1330.90 i <br />503.09 <br />1944.19 <br />1110.47 <br />509.93 <br />J & J ELECTRONICS INC E256424 <br />SUITE 100 <br />35 HAMMOND <br />IRVINE, CA 92618 <br />Class 2 LEDs, Cat. Nos. CL-YY-XXXXX, where XX)00< is any alpha numeric code denoting LED color and YY may be replaced <br />by any combination of numbers from 00 to 99 to indicate the number of LEDs.1. These products are only suitable for connection to a Class 2 power source, rated 15 Volt (DC or AC) or less.2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 <br />voltage and energy limited drcuit.3. Class 2 LED modules, cat. nos. JE-0011 JE-002X, JE-0031 JE-004X, JE-005X and JE-006X are each rated max. 15 <br />Watts per unit. When units are connected to a Class 2 drcuit, they are not to draw a total wattage of greater than the <br />secondary or output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations. <br />5. These products are not required to be endosed or protected from the weather in the end product. <br />LED power supply with Class 2 output, Cat. Nos. MJ-1260, MJ-1240, MJ-1220.1. These power supplies have a maximum of one Class 2 outputs. The output of these power supplies have been evaluated <br />to Class 2 output requirements for dc drcuits. <br />2. These products with Class 2 outputs are suitable for use in dry and damp locations only. <br />3. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spadng to <br />sidewalls, and minimum 2 inches spacing to top of enclosure.4. These products have not been subjected to Leakage Current, Strain Relief, and Impact Tests. The need to conduct these <br />tests shall be considered in the product. In addition to these tests, the need to conduct Mold Stress test on model MJ- <br />1260 shall be considered in the end product. <br />5. These products shall be provided with additional endosure when used in the end product.