Laserfiche WebLink
71 SIGN COMPONENTS MANUAL (SAM)November 14, 2012 <br />Class 2 LEDs, Cat. Nos CL-)0(-YY-ZZ )0< series, where XX may be any alphanumeric characters, YY may be any numeric <br />characters and XX may be any alpha characters.1. These produds are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 <br />voltage and energy limited circuit and which is rated greater than 12 V DC.3. These products are each rated max. 3.6 watts per module. When units are connected to a Class 2 circuit, they are not to <br />draw a total wattage of greater than the secondary or output rating of the Class 2 supply.4. These produds are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.5. These products are not required to be enclosed or protected from the weather in the end product.6. These products may be secured in place in the end product by any means available.7. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test <br />shall be considered. <br />JEWELITE WAGNER ZIP-CHANGE INC E90751 <br />3100 HIRSCH ST. <br />MELROSE PARK, IL 60160 <br />Aluminum Reinforced Sign Face Trim, Cat. Nos. Jewelite.1. The Jewelite trim, bonded to a thermoplastic sign face is not to be considered as providing a weatherproof enclosure, thereforeall internal components shall be suitable for outdoor use or shall be completely enclosed and protected from weathering.€Jh99#2*.g combinaliqn.Ot.3*J*s_bondeg tosign-faces were subjected to oven, freezing and_hymjdity testsi_ <br />·Sion Face Generic Material ISolvent 1Final Bond Adhesive |Sion Trim Generic Material <br />[Methyl Methacrylate (Acrylic) |Weid-On #4 (Methy Chloride) Meld-On #16 ,!Cellulose Acetate Butyrate <br />0(Polycarbonate)INone Weld-On #55 *ellulose Acetate Butyrate <br />:(Polycarbonate)INone Meld-On #58 lCellulose Acetate Butyrate <br />2(Polycarbonate)]None Lord Adhesive #7550 A/C jeellulose Acetate Butyrate <br />If any other combination is used, the above mentioned tests should be repeated.3. A 720 h ultraviolet radiation test was conducted on the subject sign trim in order to determine the effects of ultraviolet (UV)radiation on outdoor signs employing the Jeweljte trim. Flammability and electrical characteristics of the cellulose acetate butyrate <br />sign trim have not been evaluated.4. The suitability of internal wiring and connections should be evaluated in the end-use application.5. All metal is painted or plated to provide a means for protection against corrosion.6. Components that are employed in the end product should be evaluated with respect to suitability of construction, test <br />performance, electrical rating, mounting and operating temperature.7. JeweNte is suitable for acrylic and polycarbonate sign faces for indoor or outdoor use. It shall be applied in accordance with the <br />instructions. <br />JIANGSU SINO OPTO CO LTD <br />WENZHUANG RD <br />YIXING ECONOMIC DEVELOPMENT ZONE <br />YIXING, JIANGSU 214200 CHINA <br />LED Tubes, Cat. No. SN-T. <br />E342212 <br />1. These produds are suitable for use in dry, or damp locations.2. The lamp is maintained not less than 2 inches (50.8 mm) from combustible materials such as wood or plastic and parts that area source of heat or arcing. Spacing from lampholderto sign housing is zero.3. This LED lamp is not for use with internally shunted bipin lampholders used with fluorescent instant start lamps. <br />LED Tubes, Cat. No. St+T8-4.1. These products are suitable for use in dry locations.2. The lamp is maintained not less than 2 inches (50.8 mm) from combustible materials such as woqd or plastic and parts that area source of heat or ardng. Spadng from lampholder to sign housing js zero.3. This LED lamp is not for use with internally shunted bipin lampholders used with fluorescent instant start lamps. <br />4. These components are not suitable for use with dimmers.5. The lamp pins are conneded to power supply only at one end, the other end serves as means of mechanical support only. <br />JIANGYIN HUAHONG ALUBOND METAL INDUSTRIAL CO LTD <br />70 CHENGLU RD <br />HUASHI TOWN <br />JIANGYIN, JIANGSU 210041 CHINA <br />Structural Panel, Model Aluminum composite panel. <br />1. Suitable for use in dry, damp and wet locations.2. Suitable for use in decorative and sign body applications only.3. The panel is not suitable for use in component mounting and support applications. <br />4. Rain lightness shall be determined in the end product. <br />E353283 <br />5. Electrical spacings and bonding for grounding shall comply with the end product standard.6. A letter made from a strudural panel shall have at least two points of support and shall have no point more than 10 in. from a <br />point of support.7. The panel core materials are rated Polyethylene. Consideration,will need to be given to end product thermal spadngs from heat <br />producing components or temperature test.8. These materials are available as unpainted aluminum or pre-painted aluminum.