Laserfiche WebLink
ESR-3064P I Most Widely Accepted and Trusted <br />CITY OF SANTA ANA <br />Plannh] and Building Agency <br />P2ge 3 of 6 <br />S100 and holes or punch -outs in the web are outside <br />the scope of this report. <br />5.6 The interior nonload-bearing wall assemblies are <br />limited to interior installation where the superimposed <br />axial load is zero pounds. <br />5.7 Design of the attachment of the interior nonload- <br />bearing wall assemblies to the surrounding structure is <br />outside the scope of this report. <br />6.0 EVIDENCE SUBMITTED <br />6.1 Data in accordance with the ICC-ES Acceptance <br />Criteria for Cold -formed Steel Framing Members <br />(AC46), dated June 2012 (editorially revised April <br />2015). <br />6.2 Data in accordance with the [CC -ES Acceptance <br />Criteria for Cold -formed Steel Framing Members — <br />Interior Nonload-bearing Wall Assemblies (AC86), <br />dated May 2012 (editorially revised August 2015). <br />7.0 IDENTIFICATION <br />7.1 At a spacing not exceeding 96 inches (2440 mm) on <br />center, each cold -formed steel member is stamped, <br />stenciled or embossed with the company name or <br />initials (see the listees at the beginning of this report); <br />the acronym "ICC-ES"; the evaluation report number <br />(ESR-3064P); and the minimum uncoated base -metal <br />thickness in mils or decimal inches. For structural <br />applications, the minimum yield strength and the <br />protective coating designation (CP 60 or CP 90 as <br />defined by AISI S200-12 or ASTM C955) are included. <br />For nontstructural applications, the minimum specified <br />yield strength if over 33 ksi (230 MPa); the metallic <br />coating type and weight if other than ASTM A653 G40; <br />and the designation "NS" are included. <br />7.2 The report holder's contact information is the following <br />STEEL STUD MANUFACTURERS ASSOCIATION <br />(SSMA) <br />35 EAST WACKER DRIVE, SUITE 850 <br />CHICAGO, ILLINOIS 60601-2106 <br />(312) 224-2570 <br />www.ssma.com <br />info(o�ssma.com <br />7.3 The Additional Listees' conta t information is the <br />following; Approved <br />CONSOLIDATED FABRICAT Rq:(MRPPERMIT ISSUANCE <br />8584 MULBERRY STREET <br />FONTANA, CALIFORNIA 9233 <br />(909) 770-8920 <br />www.confabbpd.com Master ID: <br />CUSTOM STUD, INC. Date: <br />8415 220T" STREET WEST <br />LAKEVILLE, MINNESOTA 55044 <br />(952) 985-7000 <br />www.customstud.com <br />OLMAR SUPPLY, INC. <br />2140 RESEARCH DRIVE, <br />LIVERMORE, CALIFORNIA 94551 <br />www.olmarsupply.com <br />SCAFCO CORPORATION <br />2800 EAST MAIN AVENUE <br />SPOKANE, WASHINGTON 99202 <br />(509) 343-9000 <br />www.scafco.com <br />STEEL CONSTRUCTION SYSTEMS <br />11250 ASTRONAUT BOULEVARD <br />ORLANDO, FLORIDA 32837 <br />(407) 438-1664 <br />www.steelconsystems.com <br />UNITED METAL PRODUCTS, INC. <br />234 NORTH SHERMAN AVENUE <br />CORONA, CALIFORNIA 92882 <br />(951) 739-9535 <br />www.unitedmetalproducts.info <br />