Laserfiche WebLink
151 SIGN COMPONENTS MANUAL (SAM)October 1, 2013 <br />evaluated for use with Ventex VLP100-120 and Ventex VLP100-277 power supplies. Suitability with any other power supply <br />shall be determined. <br />2. The VL-x200 LED modules have been evaluated for use with Ventex VLP200-120 and Ventex VLP200-277 power supplies. <br />Suitability with any other power supply shall be determined. <br />3. The LED lighting system is suitable for use in dry and damp locations. Consideration shall be given in the end product to the <br />Exclusion of Water Test. <br />4. These products may be installed in a sign body that is not enclosure rated. Wiring outside the sign body shall be in conduit or <br />equivalent wireway. Wiring provided between the power supplies and the LED modules within the sign body shall be FUC <br />(ZNPA2), Low-Voltage LED Wire, Manufactured by Ventex Technology Inc, Cat No VA-W09, VA-W02, and VA-V\/00, Rated <br />600V and 105°C. All wire splices within the sign body shall be made using Listed wire connectors, Ventex Part No VA-WN01 <br />(Manufactured by Ideal Industries Inc, Cat No 61), rated min 600V. <br />5. When wiring connections are not made with Ventex Part No VA-WN01 (Manufactured by Ideal Industries Inc, Cat No 61) wire <br />connectors, all splices shall be provided within an electrical enclosure and shall be provided with strain relief. <br />6. The LED driver input connection methods shall comply with the wiring requirements in UL48. <br />7. When provided, the power supply shall be suitably grounded through the grounding conductor and bonded through the metal <br />mounting tabs. <br />8. The power supply is intended for hard wiring only. <br />9. Components have been evaluated for a maximum temperature/density, per the following table: <br />Density of Max Temp of Min Rating of <br />Accessory Type Model(s)Accessory (#/inA3) component(OC) plastic mount (°C) <br />LED Module VL-x100, VL-x200 1/6 82.6 80 <br />Power Supply All 1/31 70.3 80 <br />LED Module VL-)(100SC, VL-xlOON 1/4 51 48 <br />LED Module VL-nlOONS 1/4 55 60 <br />Note: The suitability of any condition that would result in a more severe wattage density shall be determined in the product. <br />9a. Models VL-x100 have been evaluated for a maximum amount of LEDs, per the following table: <br />x - LED Color Quantity of LEDs <br />W - White 120 <br />CW - Cool White 120 <br />WW - Warm White 120 <br />R - Red 180 <br />B - Blue 120 <br />G - Green 120 <br />A - Amber (Yellow)120 <br />RO - Red Orange 150 <br />Any Alphanumeric Character 120 <br />LEDs W, CW, and R shall have a maximum power dissipation of 1.33W and LEDs B, G, and A shall have a maximum power <br />dissipation of 0.7W. <br />9b. Models VI--x100SC, VL-xl OON have been evaluated for a maximum amount of LEDs, per the following table: <br />x - LED Color Quantity of LEDs <br />W - White 120 <br />CW - Cool White 120 <br />VWV - Warm Whit 120 <br />R - Red 150 <br />B - Blue 120 <br />G - Green 120 <br />A - Amber (Yellow)120 <br />RO - Red Orange 150 <br />Any Alphanumeric Character 120 <br />10. Moc eis VL-x200 have been evaluated for a maximum amount of LEDs, per the following table: <br />ix-LED Color Quantity of LEDs <br />MV - White 70 <br />.CW - Cool White 70 <br />'VWV - Warm White 70 <br />R - Red 100 <br />B - Blue 70 <br />G - Green 70 <br />A - Amber (Yellow) 70 <br />RO - Red Orange 100 <br />Any Alphanumeric Character 70