Laserfiche WebLink
City of Santa Ana Public Library Renovation <br />Allegion Group 4 Architecture Research + Planning, Inc. <br />May 07, 2025 Group 4 Project No. 22575-01 <br /> <br /> <br /> <br />087100-2 DOOR HARDWARE <br />1.4 SUBMITTALS & SUBSTITUTIONS <br />A. General: Submit in accordance with Conditions of the Contract and Division 1 Specification <br />sections. <br />B. Submit product data (catalog cuts) including manufacturers' technical product information for <br />each item of door hardware, installation instructions, maintenance of operating parts and finish, <br />and other information necessary to show compliance with requirements. <br />C. Submit six (6) copies of schedule organized vertically into “Hardware Sets” with index of doors <br />and headings, indicating complete designations of every item required for each door or opening. <br />Include following information: <br />1. Include a Cover Sheet with; <br />a. Job Name, location, telephone number. <br />b. Architects name, location and telephone number. <br />c. Contractors name, location, telephone number and job number. <br />d. Suppliers name, location, telephone number and job number. <br />e. Hardware consultant's name, location and telephone number. <br />2. Job Index information included; <br />a. Numerical door number index including; door number, hardware heading number <br />and page number. <br />b. Complete keying information (referred to DHI hand-book "Keying Systems and <br />Nomenclature"). Provision should be made in the schedule to provide keying <br />information when available; if it is not available at the time the preliminary schedule <br />is submitted. <br />c. Manufacturers' names and abbreviations for all materials. <br />d. Explanation of abbreviations, symbols, and codes used in the schedule. <br />e. Mounting locations for hardware. <br />f. Clarification statements or questions. <br />g. Catalog cuts and manufacturer’s technical data and instructions. <br />3. Vertical schedule format sample: <br /> <br />Heading Number 1 (Hardware group or set number – HW -1) <br /> <br /> (a) 1 Single Door #1 - Exterior from Corridor 101 (b) 90° (c) RH <br /> <br /> (d) 3' 0"x7' 0" x 1-3/4" x (e) 20 Minute (f) WD x HM <br /> <br />(g) 1 (h) (i) ea (j) Hinges - (k) 5BB1HW 4.5 x 4.5 NRP (l) ½ TMS (m) 626 (n) IVE <br />2 6AA 1 ea Lockset - ND50PD x RHO x RH x 10-025 x JTMS 626 SCH <br />(a) - Single or pair with opening number and location. (b) - Degree of opening (c) - Hand <br />of door(s) (d) - Door and frame dimensions and door thickness. (e) - Label requirements <br />if any. (f) - Door by frame material. (g) - (Optional) Hardware item line #. (h) - Keyset <br />Symbol. (i) - Quantity. (j) - Product description. (k) - Product Number. (l) - Fastenings <br />and other pertinent information. (m) - Hardware finish codes per ANSI A156.18. (n) - <br />Manufacture abbreviation. <br />D. Make substitution requests in accordance with Division 1. Substitution requests must be made <br />prior to bid date. Include product data and indicate benefit to the project. Furnish samples of any <br />proposed substitution.