10180863_2230 W. COTTER - Plan - Laserfiche WebLink

Home Browse Search

PV ARRAY COMBINER/JUNCTION BOX PROVIDES TRANSITION FROM ARRAY WIRING TO CONDUIT WIRING GROUND FAULT PROTECTION PROVIDED IN INVERTER THE INVERTER ARE AT 240 VOLTS FROM -13°F TO +113°D INVERTER IS LISTED TO UL-1998, UL-1741 / IEEE-929, IEEE-1547 FCC PART 15 CLASS A AND B INVERTER OUTPUT DISCONNECT RATED AT 30-AMPS, 2P, 240 VAC, NEMA 3R 1) RESIDENTIAL BUILDINGS - THE MARKINGS MAY BE PLACED WITHIN THE MAIN SERVICE DISCONNECT. THE MARKINGS SHALL BE PLACED ON THE OUTSIDE COVER IF THE MAIN SERVICE DISCONNECT IS OPERABLE WITH THE SERVICE PANEL CLOSED 2) COMMERCIAL BUILDINGS - THE MARKING SHALL BE PLACED ADJACENT TO THE MAIN SERVICE DISCONNECT CLARITY VISIBLE FROM THE LOCATION WHERE THE LEVER IS OPERATED 3) MARKINGS: VERBIAGE FORMAT, AND TYPE OF MATERIAL C. MATERIAL: (1) REFLECTIVEM WEATHER RESISTANT MATERIAL SUITABLE FOR ENVIRONMENT (USE UL 969 AS STANDARD FOR WEATHER RATING) DURABLE ADHESIVE MATERIALS MEET THIS REQUIREMENT 4) MARKING REQUIREMENTS ON DC CONDUIT RACEWAYS, ENCLOSURES, CABLE ASSEMBLIES, DC COMBINERS, AND JUNCTION BOXES: PV SYSTEM WARNING ELECTRIC SHOCK IF A GROUND FAULT IS INDICATED, NORMALLY GROUNDED CONDUCTOR MAY BE UNGROUNDED AND ENERGIZED MOUNTED ON THE INVERTER NEC 600.35 SIGNAGE PV SYSTEM WARNING ELECTRIC SHOCK THIS EQUIPMENT SUPPLIED FROM MORETHEN ONE SOURCE TERMINAL MAYBE ENERGIZED IN OPEN POSITION MOUNTED ON THE INVERTER PHOTOVOLTAIC SYSTEM AC DISCONNECT OUTPUT CURRENT OUTPUT VOLTAGE MOUNTED ON THE INVERTER GREEN SOURCE SOLUTION, LLC 22325 WYANDOTTE ST CANOGA PARK, CA 91303 862304 ISSUE DATE 2/22/2014 A V EQUIPMENT GROUNDING CONDUCTORS ON AC AND DC SIDE SIZED ACCORDING TO THE CEC 250.122 FLOATING ARRAY ONLY-GROUND REFERENCING NOT ALLOWED (IE. UNDERGROUNDED SYSTEM) ALL TWIST ON WIRE CONNECTORS AND PRESSURE LUGS LISTED FOR THE ENVIRONMENT ALL USER ACCESSIBLE FUSES TO BE TOUCH SAFE, HOLDERS NO LIVE CONTACT A. VERBIAGE: CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED B. FORMAT: (1) WHITE LETTERING ON RED BACKGROUND (2) MINIMUM 3/8 INCHES LETTER HEIGHT (2) ALL LETTERS SHALL BE CAPITALIZED A. MARKINGS: PLACEMENT, VERBIAGE, FORMAT, AND TYPE OF MATERIAL B. PLACEMENT: MARKINGS SHALL BE PLACED EVERY 10 FEET ON ALL INTERIOR AND EXTERIOR DC CONDUITS, RACEWAYS, ENCLOSURES, AND CABLE ASSEMBLIES, AT TURNS, ABOVE AND/OR BELOW PENETRATIONS, ALL DC COMBINERS, AND JINCTION BOXES WARNING 2 SOURCES OF POWER PV/AC DISCONNECT @ ADJACENT LOCATION MOUNTED ON THE MAIN PANEL WARNING DUAL POWER SUPPLY PHOTOVOLTAIC SYSTEM MOUNTED ON MAIN PANEL PHOTOVOLTAIC SYSTEM AC DISCONNECT RATED MPP CURRENT -A RATED MPP VOLTAGE -V RATEDISC --A RATED VOC -V MOUNTED ON DC DISCONNECT REV.:DATE:-DESCRIPTION:-BY PROJECT INFORMATtON BONDING FITTINGS TO BE USED WITH METAL CONDUIT WHEN DC SYSTEM VOLTAGE IS MORE THEN 250VDC (4) ARIAL OR SIMILAR FONT, NOT BOLD C. VERBIAGE: CAUTION: SOLAR CIRCUIT CAUTION: SOLAR CIRCUIT PHOTOVOLTAIC SYSTEM INVERTER 10 SUNPOWER E20-327 SOLAR MODULES & GROUNDED CONDUCTORS TO BE WHITE AND EQUIPMENT GROUNDING CONDUCTORS TO BE GREEN, GREENMELLOWOR BARE PER 200.6 (A) 2010 CEC ALL BREAKERS FOR PV SUITABLE FOR BACKFEED SHALL NOT NEED LINE AND LOAD NOTE: • THE CONNECTORS SHALL BE OF THE LATCHING OR LOCKING TYPE AS SHOWN BELOW FOR BOTH ALTERNATING CURRENT AS WELL AS DIRECT CURRENT: 600 VDC MAX MOUNTED ON THE INVERTER 1 PVI-3.0-OUTD-S-US-A %" IN SIZE INVERTER MOUNTED ON CONDUIT BOTH AC AND DC AND ALSO ON THE MOUNTED ON DC DISCONNECT J-BOXES/COMBINER BOXES ROOF MOUNT EVERY 10' ON CONDUIT COMP. SHINGLE CONDUCTOR TYPE RATED FOR 90°C WET RATED AND SUNLIGHT RESISTANT ALL NON-CURRENT METAL PARTS, FRAMES, BOXES ARE PROPERLY BONDED AND GROUNDED TO THE GROUNDING SYSTEM WARNING ELECTRIC SHOCK HAZARD Poutrvo DC wie Neoctive DC wlro THE DC CONDUCTORS OF THIS comeited » DC+ -conn®gd ro DC-PHOTOVOLTAIC SYSTEM ARE UNGROUNDED AND MAY BE ENERGIZED NEC 690.35 (F) WARNING INVERTER OUTPUT CONNECTION DRAWN BY: - CHK.:- APV.:- DO NOT RELOCATE THIS OVERCURRENT DEVICE MOUNTED ON THE INVERTER OSS MOUNTED BY BREAKER IN MAIN PANEL ALL WIRING UNDER MODULES TO BE SECURED PROPERLY WITH NO LOOSE CONDUCTORS-FREE FROM ROOF MATERIAL CONTACT AND INSTALLED IN A WORKMAN LIKE MANNER l1 N l2 1 1 ill| Art •na,a 40.29E-L-'J Ne--W71 -3P .11 11 FIgure 54: DC Con:eclion Feiminch CAUTION: SOLAR ELECTRIC SYSTEM CONNECTED CLIENT INFORMATION ANGEL TORO ALL CONDUIT TO BE PROPERLY SECURED AND SUPPORTED PER CH.3 2010 CEC 2230 COTTER ST SANTA ANA, CA 92706 1. CAUTION: SOLAR ELECTRIC CONNECTED - SIGNAGE LOCATION: RESIDENTIAL BUILDINGS THE MARKING MAY BE PLACED WITHIN THE MAIN SERVICE DISCONNECT. THE MARKING SHALL BE PLACED ON THE OUTSIDE COVER IF THE MAIN SERVICE DISCONNECT IS OPERABLE WITH THE SERVICE PANEL CLOSED. PHOTOVOLTAIC SOLAR SYSTEM SHEET TITLE 2. CAUTION: SOLAR CIRCUIT-LOCATION: SHALL BE PLACED EVERY 10' ON ALL INTERIOR AND EXTERIOR DC CIRCUITS, RACEWAYS, ENCLOSURES, AND CABLE ASSEMBLIES, AT TURNS, ABOVE AND BELOW PENETRATIONS, ALL DC COMBINER AND JUNCTION BOXES PV SIGNAGE A. WHITE LETTERING ON A RED BACKGROUND B. MINIMUM%" LETTER HEIGHT C. ALL LETTER SHALL BE CAPITALIZED D. ARIAL OR SIMILAR FONT, NON-BOLD E. (MATERIAL) REFLECTIVE, WEATHER RESISTANT MATERIAL SUITABLE FOR THE ENVIRONMENT (USE UL 969 AS STANDARD FOR WEATHER RATING) DURABLE ADHESIVE MATERIALS MEET THIS REQUIREMENT SHEET NUMBER .. --