Laserfiche WebLink
NOTES: <br />1) ALL BOLTS SHALL BE TORQUED TO <br />30 LBS. PER FOOT <br />NOTES (CONTINUED): <br />12) DO NOT COVER (MECHANICAL AND PLUMBING) VENTS <br />THROUGH THE ROOF WITH THE COLLECTOR <br />]4"-20 T-BOLT - <br />}1"-20 T-BOLT 7 r SOLAR MODULE <br />- A"-20 SERRATED <br />FLANGE NUT <br />LEVI BUILDERS <br />2) SYSTEM INSTALLATION TO ADHERE <br />7 TO ALL MANUFACTURER'S <br />RECOMMENDATIONS. (SPEC. SHEETS <br />ATTACHED), NATIONAL AND LOCAL <br />BUILDING CODES <br />3) PANELS TO BE MOUNTED IN <br />ACCORDANCE WITH UNI-RAC/ <br />UNI-STRUT INSTRUCTIONS AND <br />LOCAL CODE <br />4) CUTS TO UNI-STRUT ARE TO BE <br />PAINTED WITH COLD GALV. PAINT <br />74"-20 SERRATED -1 <br />13) WHEN INSTALLED OVER A ROOF COVERING OF WOOD FLANGE NUT <br />SHAKES OR SHINGLES WITH LESS THAN A CLASS B OR C <br />RATING, AN ALUMINUM OR CORROSION-RESISTANT IRON ¤551./ <br />SUBSTRATE OF 26 GAUGE MINIMUM THICKNESS - MID CLAMP <br />EXTENDING AT LEAST 6IN. BEYOND THE OUTER EDGES OF <br />THE COLLECTOR GROUP IS REQUIRED UNIR*C/'dgit .4 <br />SOLARMOUNT RAIL <br />MID CLAMP 11\- UNIRACr SOLAR MODULE SOLARMOUNT RAIL <br />-- SOLARMOUNT <br />SPLICE KIT <br />ISSUE DATE <br />UNIRAC <br />SOLARMOUNT RAIL L %"-16 x 31" <br />HEX BOLT 3/17/2014 <br />%"-16 FLANGE NUTL-BRACKET - <br />REV.:DATE:-DESCRIPTION:-BY <br />5) ANTI-SEIZE THREAD COMPOUND <br />SHALL BE APPLIED TO ALL SS BOLT <br />HARDWARE TO PREVENT GALLING 3% <br />6) KEEP BOLT IN STANCHION UNTIL -1 <br />RAILS ARE FASTENED TO PREVENT <br />WATER ENTRY <br />7) INSTALLATION SHALL COMPLY <br />WITH ARTICLE 690 OF THE 2010 CEC <br />AND CBC <br />PROJECT INFORMAnON <br />10 SUNPOWER <br />E20-327 <br />8) IN ANY LOCATION THAT THE <br />CONDUIT RUNS THROUGH THE ROOF <br />AND INTO THE BUILDING, THAT <br />CONDUIT IS TO BE KEPT 18" BELOW <br />THE ROOF SURFACE AND IDENTIFIED <br />AS A SOLAR CIRCUIT <br />9) PROVIDE GROUND FAULT <br />PROTECTION PER 690.5 CEC <br />10) KEEP BOLT IN STANCHION UNTIL <br />RAILS ARE FASTENED TO PREVENT <br />WATER ENTRY <br />11) ARRAYS WILL BE PLACED 3"-8 <br />ABOVE ROOF SURFACE <br />PV QUICK MOUNT DETAILS <br />-RACKING COMPONENTS <br />NOTINCLUDED <br />¥COEEssed <br />NO. C70784 1%1| <br />wil EXP. 06/30/2015 0 <br />1.3 <br />3.04 6 ® <br />M <br />SOLAR MODULES <br />& <br />1 PVI-3.0-OUTD-S-US-A <br />INVERTER <br />ROOF MOUNT <br />COMP. SHINGLE <br />DRAWN BY: - CHI: - APV.:- <br />GSS <br />CLIENT INFORMATION <br />MARISELA <br />REYES <br />2309 W ST ANNE PL <br />SANTA ANA, CA <br />92704 <br />PHOTOVOLTAIC <br />SOLAR SYSTEM <br />SHEETTrrLE <br />ITEM <br />NO.DESCRIPTION QTY. <br />1 <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />FLASHING, 12" X 12° X .050", 5052. MILL <br />QBLOCK, CLASSIC, A360.1 CAST AL. MILL <br />HANGER BOLT, 5/16° x 6°. 18-8 SS <br />WASHER, SEALING, 5/16" ID X 3/4" OD, <br />EPDM BONDED SS <br />NUT, HEX, 5/16-18, UNC-2.18-8 SS <br />WASHER, FLAT, 19/64" ID x 7/8" OD x 1/8" <br />EPDM <br />WASHER, FENDER, 5/16" ID X 1 " OD. 18-8 SS <br />WASHER. SPLIT-LOCK. 5/16" ID. 18-8 SS <br />midspan <br />our* Ra. <br />so\a <br />10'-1" <br />1 <br />11 CONNECTION <br />DETAILS <br />/ <br />2 <br />1 2"*6" Rafter @ 24" O.,C. SHEET NUMBER1 with purlin supports @1 <br />S9 S 1 <br />N