Laserfiche WebLink
Installing the <br />M215 Microinverter (M215-60) <br />Read and follow all warnings and instructions in the M215 Installation and Operation Manual at <br />http://www.enphase.com/support before installing the M215 Microinverter™. <br />Install the Envoy Communications Gateway <br />Install according to the steps in the Envoy Quick insta# Guide. <br />Leave the Envoy running while you install the micfoinverters so <br />that any required Envoy software upgrade completes. <br />Envoy <br />(-03 broadband <br />router <br />Warning: Do not remove power from <br />the Envoy if the LCD displays: <br />"Upgrading. . . Do Not Unplug." <br />AC power <br />1 cord <br />B <br />Ethernet cable <br />0 <br />\\ <br />Position the Enphase EngageM Cable <br />a. Lay out the cabling along the' installed racking for <br />the AC branch circuit. <br />terminator - <br />b. Install an appropriately rated, off-the-shelf junction <br />box at a suitable location on the racking./0-21 /h2-9<-) Engage CableSee notes in Step Details on back. <br />6 <br />AC junction box . 2*6 <br />drop conr <br />49 0 \cable ties <br />Cld¢t. connects to drop <br />connectors <br />M215 <br />DC connectors <br />Check the drop connector labels to <br />be sure that you have the right cable. <br />You must wse 240 VAC cable for single phase <br />or 208 VAC cable for three-phase. <br />120® <br />Cul