Laserfiche WebLink
October 1, 2013 SIGN COMPONENTS MANUAL (SAM)146 <br />1. These power supplies have been evaluated to Class 2 output requirements for dc circuits with a maximum of one Class 2 <br />output. <br />2. These products are provided with the following electrical ratings: <br />Input Output Output <br />Input Input Current Power Voltage (\/Output Power <br />Model No.Voltage 04 Freq (HZ) (A) Factor dc) Current (A) ON) <br />LCU 060/12 D 120-240 50/60 075 0.95 12 5.0 60 <br />LCU 035/12 D XX 120-240 50/60 0.39 0.95 12 2.92 35 <br />LCU 015/12 D 120-240 50/60 0.35 0.4 12 1.25 15 <br />3. In the end product, power supply spacing to other heat producing components shall be at least 25.4 mm (1 in) from end to end <br />and 101.6 mm (4 in) from side to side. <br />4. These products shall be enclosed in suitable electrical enclosure in the end product. <br />5. These products are suitable for factory wiring only. <br />6. The load powered by the Class 2 output of these power supplies at the 12 Vdc rating or less is suitable for use in dry, damp and <br />wet locations. <br />7. These products have been tested in oven at 50°C ambient, with the following maximum case temperatures, Tc: <br />For model LCU 060/12 D the To = 82°C; for model LCU 035/12 D XX the T. = 64°C; for model LCU 035/12 D XX the Tc=74°C. <br />8. These products are intended for use in a dry or damp locations only. <br />9. The suitability of inpuUoutput leads and the wing shall be determined in end product use. <br />10. The metal case of Model LCU 015/12 D is not grounded. The proper grounding means of this product shall comply with the <br />end product requirements. <br />Class 2 LED modules, Models P541-CLA, P551-SEL. <br />1. These products are only suitable for connection to a Class 2 power source rated 14 V DC or less. <br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy <br />limited circuit and is rated at 14 V DC or less. <br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output <br />rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 14 V DC or less. <br />5. These products are not required to be enclosed or protected from the weather in the end product. <br />6. These products may be secured in place in the end product by any means available. <br />TRONICC TECHNOLOGIES E357992 <br />18584 BUDGE <br />PIERREFONDS, QC H9K1 K8 CANADA <br />Sign accessories, Class 2 LED modules, 1-T-M-01, TT-M-02, TT-M-03, TT-M-04, TT-B-01. <br />1. These products were evaluated for connection to a UL Listed or Recognized Component Sign Accessory - UYMR2, Class 2 <br />source. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage <br />and energy limiting requirements. <br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output <br />rating of the Class 2 supply. <br />4. These products are suitable for use in dry and damp locations. <br />5. Consideration for the installation and power supply connection and interconnection is to be determined in the end-use <br />application. <br />TUBE LIGHTING PRODUCTS E348777 <br />1346 PIONEER WAY <br />EL CAJON, CA 92020 <br />Class 2 LED Strip, Model DSH Series. <br />1. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy <br />limited circuit and is rated less than 24V DC. <br />2. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output <br />rating of the Class 2 supply. <br />3. These products are suitable for use in dry, damp and wet locations. <br />4. These products do not require an electrical enclosure. <br />5. These products may be secured in place in the end product by any means available. <br /> US LED LTD <br />6807 PORTWEST DR <br />E226833 <br />HOUSTON, TX 77024 <br />Class 2 LED Module, Model MY-12-K-XX "MegaX" Series, where Y may be replaced by any number from 0 to 99 incl., K may be <br />replaced by W, R, B, Y, G or RO and XX is optional, where it may be replaced by any alphanumeric characters (0 to 99 incl. or A <br />to Z incl. or combinations). . <br />1. These products are only suitable for connection to a Class 2 power source, rated max 24 Volt DC or less. <br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage <br />and energy limited circuit. <br />3. These Class 2 LED Modules are each rated 0.77 Watts per unit. When units are connected to a Class 2 circuit, they are not to <br />draw a total wattage of greater than the secondary or output rating of the Class 2 supply. <br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volt DC or less. When rated <br />24 VDC, these products are suitable for dry and damp locations only. <br />5. These products are not required to be enclosed or protected from the weather in the end product.