My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
HOLD - 910 E Warner Ave - Trusses - Plan
PBA
>
Building
>
ProjectDox
>
W
>
Warner Ave
>
910 E Warner Ave
>
HOLD - 910 E Warner Ave - Trusses - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/13/2025 12:19:16 PM
Creation date
11/5/2025 5:00:05 AM
Metadata
Fields
Template:
Plan
Permit Number
102122458
Full Address
910 E Warner Ave
Street Number
910
Street Direction
E
Street Name
Warner
Street Suffix
Ave
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
20
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
400 Sunrise Ave., Suite 270 <br />Roseville, CA 95661 <br />916.755.3571 / MiTek-US.com <br />Design valid for use only with MiTek® connectors. This design is based only upon parameters shown, and is for an individual building component, not <br />a truss system. Before use, the building designer must verify the applicability of design parameters and properly incorporate this design into the overall <br />building design. Bracing indicated is to prevent buckling of individual truss web and/or chord members only. Additional temporary and permanent bracing <br />is always required for stability and to prevent collapse with possible personal injury and property damage. For general guidance regarding the <br />fabrication, storage, delivery, erection and bracing of trusses and truss systems, see ANSI/TPI1 Quality Criteria and DSB-22 available from Truss Plate Institute (www.tpinst.org) <br />BCSI Building Component Safety Information <br />WARNING - Verify design parameters and READ NOTES ON THIS AND INCLUDED MITEK REFERENCE PAGE MII-7473 rev. 1/2/2023 BEFORE USE. <br />and available from the Structural Building Component Association (www.sbcscomponents.com) <br />SUPPORT OF B.C. OF STANDARD OPEN END <br />JACK USING PRESSURE BLOCKS <br />CAL HIP <br />GIRDER <br />CAL HIP <br /> SUB <br />GIRDER <br />24" TYP <br />6-0-0 <br />PARTIAL FRAMING PLAN OF <br />CALIFORNIA HIP SET WITH <br /> SUB GIRDER <br />BC of carrier truss <br />2x4 block between jacks, nailed to carrier BC <br />w/ 6-(0.131" X 3" MIN.) NAILS @ 3" o.c. <br />2-(0.131" X 3" MIN.) NAILS (typ) <br />2x4 block <br />between jacks, <br />nailed to carrier bch <br />w/6 (0.131" X 3" MIN.) <br />nails spaced at 3" o.c. <br />2x4 bot. chord <br />of jack <br />jack <br />truss <br />(typ) <br />Carrier truss <br />2- (0.131" X 3" MIN.) <br />NAILS (typ) <br />Loading (PSF): <br />BCDL 10.0 PSF MAX <br />BOTTOM CHORD OF OPEN END JACK <br />MII-OPEN JACK-BLOCKS <br />MiTek USA, Inc.Page 1 of 1 <br />A MiTek Affiliate <br />ENGINEERED BY <br />SEPTEMBER 1, 2021 <br />December 19,2024
The URL can be used to link to this page
Your browser does not support the video tag.