|
49 SIGN COMPONENTS MANUAL (SAM)November 14,2012
<br />5. Units may be provided with UYMR2,3M type VHB double-sided adhesive tape. Tape must be utilized per UYMR2 Conditions of
<br />Use as defined in the Sign Components Manual.
<br />6. The Light Guide has not been evaluated as an LED Strip Light enclosure or diffuser. Suitability shall be determined in the end
<br />use product.
<br />NOMENCLATURE:
<br />Nomenclature for LED Strip Light: GE-XX-XX-X-XXX, GE-XX-XX-XX-XXX, GE-XX-XX-XXX-XXX, GE-XX-XX-XXXX-XXX, GE-XX-
<br />XX-XXXXX-XXX, GE-XX-XX-XXXXXX-XXX, GE-XX-XX-XXXXXXX-XXX, GE-XX-XX-XXXXXXXX-XXX, GE-XX-XX-XXXXXXXXX-
<br />XXX.
<br />First Set of"XX" = denotes the. color of the LED
<br />RD = Red family
<br />RC = Red/Orange family
<br />YG = yellow family
<br />GL = Green family
<br />SB, BL = Blue Family
<br />WH = White
<br />YA = Amber
<br />WW = Warm White
<br />GR = Green
<br />po = Portland Orange
<br />Second Set of "XX" = denotes product line
<br />CL = channel letter
<br />DS =double sided Power Strip
<br />XL = tetra long strip
<br />PT =power tetra
<br />XN =Contour or Contour LS
<br />TM =Mini
<br />MX =Max
<br />TU =Ultra
<br />PG =Power GridPX = Power White XL
<br />PH =Power White HO
<br />XH =Power White XL HO
<br />MM =Mini Max
<br />SS =Power Strip
<br />Third set of 'DO(" denotes Light Strip final assembly as noted below:
<br />LA =Light Strip, assembled inside a plastic rod, 8 inch section
<br />LE = Light Engine means same as Light strips
<br />AA =Light engine, assembled inside a plastic rod, 16 inch section
<br />SX or X =Number of LEDs per foot where Xisl =6 LEDs per foot etc. (X can be representative of lt09 digits)
<br />\AD<X =Wide Angle light diffuser, where the first X describes the PCB length, A for regular and L for long, and the
<br />second X is an alpha numeric character of leds per foot.
<br />PX =For PowerGrid (PG), Power Strip (SS) and Double Sided Power Strip (DS) only, where x equals the
<br />number of LEDs per foot. Not Assembled in Tube. An optional X may be added to denote wire length
<br />between modules where X is S for short, M for Medium, and L for Long.
<br />XX =only to be used with DS product line, xx is number that correlates to total length in inches (48 = 48")
<br />assembled in acrylic tube.
<br />"XXX" denotes any alphanumeric character that denotes the Color Temperature of the LEDs i.e. 65k = 6500,75k = 7500 etc.
<br />Splice connector, Cat. No. Ge=SCx; End caps, Cat. No. GexxECx.
<br />1. These products are only suitable for connection to a Class 2 power source.
<br />2. When units are connected to a Class 2/"LPS" circuit, they are not to draw a total wattage of greater than the secondary or
<br />output rating of the Class 2/"LPS" supply.
<br />3. These products are suitable for use in dry, damp and wet locations.
<br />4. These products described in this section may be cut into segments per manufacture insulation instructions.
<br />5. Units may be provided with UYMR2,3M type VHB double-sided adhesive tape. Tape must be utilized per UYMR2 "Conditions
<br />of Use" as defined in the Sign Components Manual.
<br />6. The Light Guide has not been evaluated as an LED Strip Light enclosure or diffuser. Suitability shall be determined in the end
<br />use product.
<br />LED Controller, LED Tetra FX Special Lighting Effects Controller, Cat. No. GEFX1
<br />1. This product is suitable for only when connected to a Class 2 power source or LSP, Model GEXLPS20, GEXLPS21, GEXNOS30
<br />or GEXNPS31 by GE. Rated Input is 12/24 V dc, Output is 12/24 V dc.
<br />2. This product is a Class 2 device suitable for use in dry, damp and wet locations.
<br />3. The controller shall be provided in a suitable housing when use in wet locations.
<br />4. Lead wires are R/C (AVL\/2), Style 2651, rated 105 C, 300V. Not suitable for use inside walls, above ceiling or other similar
<br />concealed spaces unless mounted inside an electrical enclosure.
<br />5. The controller is provided with a DMX 5-pins input connector. The pin arrangements in the connector shall always be the same.
<br />The DMX controller is capable of providing the 4 channel dimming, flashing, chasing, sequencing, color mixing, and color
<br />changing functions.
<br />LED wire, Cat. No. GExxSWx. Nomenclature for Splice Connectors, LED Wires, End Caps: xx denotes product line, CL = channel
<br />letter, DS = double sided, XL = tetra long strip, PT = power tetra, XN = Exposed Neon, TM = Mini, MX = Max, TU = Ultra, PG =
|