|
November 14, 2012 SIGN COMPONENTS MANUAL (SAM)120
<br />5. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shall
<br />be considered.
<br />SILICON CONSTELLATIONS INC
<br />2980 SCOTT BLVD
<br />E324890
<br />SANTA CLARA, CA 95054
<br />LED Modules, Model No. REELLIOUS I.
<br />1. These products are only suitable for connection to a Class 2 power source rated 30 Volt DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited circuit and which is rated greater than 30 V DC.
<br />3. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating
<br />of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 30 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means
<br />available.
<br />7. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shall
<br />be considered.
<br />SINO-OPTO USA LLC, DBA LED LIGHTING SERVICES LLC E342085
<br />3575 COMMERCIAL AVE
<br />NORTHBROOK, IL 60062
<br />LED Tube, Cat. Nos. LLIT8-48-18W, LLIT8-24-10W.
<br />1. These products are suitable for use in dry, or damp locations.
<br />2. The lamp is maintained not less than 2 inches (50.8 mm) from combustible materials such as wood or plastic and parts that are
<br />a source of heat or arcing. Spacing from lampholder to sign housing is zero.
<br />3. This LED lamp is not for use with internally shunted bipin lampholders used with fluorescent instant start lamps.
<br />SINO-OPTO USA LLC, DBA LED LIGHTING SERVICES LLC
<br />3575 COMMERCIAL AVE
<br />E345360
<br />NORTHBROOK, IL 60062
<br />LED Tube, Cat. No. SN-T.
<br />1. These products are suitable for use in dry, or damp locations.
<br />2. The lamp is maintained not less than 2 inches (50.8 mm) from combustible materials such as wood or plastic and parts that are
<br />a source of heat or arcing. Spacing from lampholder to sign housing is zero.
<br />3. This LED lamp is not for use with internally shunted bipin lampholders used with fluorescent instant start lamps.
<br />LED Tube, Cat. No. LLI-T10DBL.
<br />1. Manufacturer's name, trade name, or trademark.
<br />2. Distinctive catalog or model number.
<br />3. The electrical ratings.
<br />/hen multiple manufactures are involved, then a Factory ID identifying the product to a particular factory shall be provided.
<br />ptional - "For Connection with Class 2 Circuits Only."
<br />SLOANLED, DIV OF SLOAN CO INC
<br />5725 OLIVAS PARK DR
<br />VENTURA, CA 93003
<br />E215393
<br />LED Modules, Cat. Nos. 701261, 701261-PW, 701340, with suffix -R, -O,-Y, -B, -G, -W or -A; Cat. Nos. 701340-PW with suffix -
<br />R, -O, -Y, -A, -B, -G or-W; Cat. No. 701340-CM.
<br />1.These products are only suitable for connection to a UL Listed or Recognized Class 2,24 V dc power source for Model 701340
<br />and 7.5 V dc or 5 V dc power source for Model 701261.
<br />2.These products have not been evaluated for use when connected to a power source that does'not comply with Class 2 voltage (
<br />and energy limited supplies.
<br />3.The total number of Model 701261 LED Lighting Units are not to exceed a total of 75 units per Class 2 circuit. The total number
<br />of Model 701340 LED Lighting Units are not to exceed a total of 40 units per Class 2 circuit.
<br />4.These products are suitable for use in dry, damp and wet locations.
<br />5.These products are not required to be enclosed or protected from weather.
<br />Class 2 LEDs, "ThinLED", Model 701228 , with suffix -A, -B, -G, -R, -W or -Y; Cat. No. 701228-18, with suffix -A, -B, -G, -R, -W or -Y.
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2, max. 12 V dc power source. . Only
<br />Models 701228-A, -R, or -Y are only suitable for connection to UL Listed or Recognized Class 2, max. 7.5 V dc.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
<br />3. The total number of these products when interconnected is not to exceed a total of 14 feet or 14 "ThinLED" units per Class 2
<br />circuit. These products are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />5. These products are not required to be enclosed or protected from weather.
<br />Class 2 power supply, Model LED Outline Lighting Systems "FlexiBRIGHT", Cat. No. 701499-X-Y, where X and Y may be any
<br />alphanumeric character.
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2, 12 volt DC power source or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
|