10179314_2800 N. MAIN 1048 - Plan (2)

Home Browse Search

93 SIGN COMPONENTS MANUAL (SAM)June 19, 2013 N GLANTZ & SON E352418 2501 CONSTANT COMMENT PL LOUISVILLE, KY 40299 Structural panels, Models EMPB30, EMPB31 L. 1. The structural panel is suitable for use in dry, damp and wet locations. 2. The structural panel may be used in decorative and sign body applications, and shall not be used as part of the sign enclosure. 3. The panel is not suitable for use in component mounting and support applications. 4. Rain tightness shall be determined in the end product. 5. Electrical spacing and bonding for grounding shall comply with the end product standard. 6. Not suitable for use in terminating conduit. 7. Any parts other than neon standoffs or small decorative parts secured to the panel must be secured by means of through bolts, nuts and washers. The minimum washer diameter is 7/16 in. 8. A letter made from a structural panel shall have at least two points of support and shall have no point more than 10 in. from a point of support. 9. The structural panels are rated 75°C, where consideration will need to be given to end product thermal spacing from heat producing components. 10. These materials are available as unpainted aluminum or pre-painted aluminum. 11. This material has not been investigated for the securement of conduit, electrode housings or the like, suitability shall be determined in the end product. NANJING CEDAR GREEN TECHNOLOGIES CO LTD 739 SHENGAN AVENUEY BINJIANG DEVELOPMENT AREA JIANGNING DISTRICT E358556 NANJING, JIANGSU CHINA Class 2 LED modules, Cat. No. CD-MXX-XXX-XX-XX-XXX series. The first X can be any one of the Arabic numerals of 1 through 9, these indicate LED quantity; The second X can be any letter in alphabet, represent for beam angel The third X is for the supplier of the lamp; The fourth X is for the model of the lamp; The fifth X can be any one of alphanumeric characters; The sixth and seventh X is for the color; The eighth and ninth X is for the product versions; The last three X are for the input voltage, 12V represent the input voltage is 12VDC, 15V represent the input voltage is 15VDC. 1. These products are only suitable for connection to a Class 2 power source, rated 15 Volt DC or less. (For model CD- MXX-XXX- XX-XX-15\/9 2. These products are only suitable for connection to a Class 2 power source, rated 12 Volt DC or less. (For model CD- MXX-XXX- XX-XX-12\4 3. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limits and which is rated greater than electrical ratings. 4. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 5. These products are suitable for use in dry, damp and wet locations with supply sources rated at 15 Vdc or less. (For model CD- MXX-XXX-XX-XX-15\0 6. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Vdc or less. (For model CD- MXX-XXX-XX-XX-12\0 7. These products are not required to be enclosed or protected from the weather in the end product. 8. The suitability of supply leads shall be determined in end use. NANOLUMENS INC 4900 AVALON RIDGE PKY NORCROSS, GA 30071 Component Signs, Models NS-521, NS-600, NS-625. 1. These components should be installed in accordance with the manufacturer's installation instructions. 2. These products are suitable for use in dry locations. 3. Each power supply can only drive max number of 15 modules. 4. These units are rated as follows; E348993 1 Input Output Per Power Supply Input Voltage Max. Input Current Input Frequency Output Voltage Max. Output Current Model Designation (Vac) (A) (Hz)(Vdc) (A) NS-521, NS-600, NS-625 120-240 5-2.5 50/60 5 60 5. These products shall be enclosed in a suitable electric enclosure in the end product. 6. When provided with attachment plug, this product shall be connected to a dedicated receptacle in a permanently connected sign. 7. These products are suitable for factory installation only. NC LED CO LTD 16-17 GAGOK-RI HWADO-EUP NAMYANGJU-SI, GYEONGGI-DO 472-841 REPUBLIC OF KOREA E347462