|
June 19, 2013 SIGN COMPONENTS MANUAL (SAM) 94
<br />Sign Accessories, Class 2 LED Modules: HLC1, HLC2S, HLC2, HLC3S, HLC3, HLC4, OMX-L4, OMX-L3, OMX-M3, OMX-M2,
<br />OMX-S2, OMX-Nl, CC-IP-04, CC-IP-03L, CC-IP-03, CC-IP-02L, CC-IP-02, CC-IP-01, ELW4, ELW3L, ELW3, ELW2L, ELW2,
<br />ELW1, CCL46, CCL3L, CCL), CCL2L, CCL2, CCI-1, LX-HLC4, LX-HLC3S, LX-HLC2S, ECO1, ECO2S, ECO2, ECO3S, ECO3,
<br />ECO4, EC-IP-04, EC-IP-03L, EC-IP-03, EC-IP-02L, EC-IP-02, EC-IP-01, eco max OMX-L4, eco max OMX-L3, eco max OMX-M3,
<br />eco max OMX-M2, eco max OMX-S2, eco max OMX-Nl, LX-ECO4, LX-ECO3S, L)<-ECO2S, NCP1, NCP2S, NCP2, NCP3S,
<br />NCP3, NCP4, CCL#, NCC3, NCC36, NCC2, 146626, NCC 1, LX-HLC4, LX-HLC3S, I.X-HLC2S, LX-EC04, LX-EC03S, LX-
<br />ECO2S, MIN13, RGB3, RGB4,1-X-RGB3, L)<-RGE34.
<br />1. These products are only suitable for connection to a Class 2 power source rated 12 Volt DC or less.
<br />2. These products are intended for use only when connected to a power source that complies with Class 2 voltage and energy
<br />limited circuit and is rated greater than 12 V DC.
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means.
<br />NEO-NEON LED LIGHTING INTERNATIONAL LTD
<br />G FL & BASEMENT LEVEL 1 OF
<br />NEW EAST OCEAN CENTRE
<br />9 SCIENCE MUSEUM RD
<br />E252578
<br />TSIM SHA TSUI EAST, KOWLOON HONG KONG
<br />LED String System, Cat. Nos. LED vertical PCB, Model LC-BL-300-12\/-**. LED vertical PCB, Model LC-BL-300-12\A" LED
<br />horizontal PCB, Model LC-BL-110S-12\/-**. LED horizontal PCB, Model LC-BL-110S-12\/-**. LED horizontal PCB string, Model
<br />LC-BL-24\66-TYPE A-". LED horizontal PCB string, Model LC-BL-24\66-TYPE A-**. LED horizontal PCB string, Model LC-BL-
<br />24\/-6-TYPE B-**. LED horizontal PCB edge lite, Model LBLU-10x88-6-12\/-**. LED horizontal PCB edge lite, Model LBLU-10x88-
<br />6-12\/-** LED vertical flex PCB, Model LBLU(FX)-V-6.25\'-12V-**. LED flexible listel light, Model FLF-99-1 M-12\6**. LED tubes,
<br />Models LN-MN-300-24\AM(VV), LN-MN-600-24\AM(W), LN-MN-1000-24\AM(W), and LED tube controller, Model SRC-181-24V.
<br />LED back light string, Model LBLS-PL-2P-12\/-**, LBLS-AL-2P-12\/-**, and LF®-A-1-12\A". LED high power back light, Model
<br />LBLS-AL-CC350-", and LBLS-PL-CC350-**. LED linear flex, Model LBLU(FX)-H-10x420-10-24\/-**
<br />** can be replaced by additional letters or numbers to indicate color.
<br />1. LED's may be supplied by a UL Listed or Recognized Component Sign Accessory - UYMR2, Class 2,24 VDC maximum
<br />output power source.
<br />2. LED's were evaluated for connection to a UL Listed or Recognized Component Sign Accessory - UYMR2, Class 2 source.
<br />3. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limiting requirements.
<br />4. These products are not to draw a total wattage greater than the secondary or output rating of the Class 2 supply per Class 2
<br />circuit.
<br />5. Certain products described in this section may be cut into segments through a cutting line provided on the printed wiring
<br />board. No other cut across the board is permitted.
<br />6. Units may be provided with UYMR2,3M type 4950 double sided adhesive tape.
<br />LED Outline Lighting, Rectifier for 6VDC and 12V DC Class 2 Circuit, Model No. MLF(H)-2W-5)<8*a*b*c, may have suffixes a,
<br />b or c (a = 3Ft - 132Ft., b = 6Vdc or 12Vdc; c = R, Y, W, G, B (LED lamp color)).
<br />Note: 3Ft - 120Ft for 6V DC, 3Ft - 132Ft for 12VDC
<br />1. These products are only suitable for connection to a UL Recognized (UYMR2) Class 2 Power supply with a continuous
<br />output of 6 Vdc or 12 Vdc.
<br />2. These products may be connected to a 6V or 12 V AC, UL Recognized (UYMR2) Class 2 power source when provided with
<br />optional rectifier.
<br />3. These products are rated to draw 4.5 Amps at 12Vdc at a 132Ft maximum and 4 Amps at 6 Vdc at 120Ft maximum. Each
<br />unit shall be connected so as to not exceed the output current and power rating of the power supply.
<br />4. These products, when connected to a UL Recognized (UYMR2), Class 2 Power supply with a continuous output of 6 Vdc or
<br />12 Vdc, are suitable for installation in wet, damp and dry locations.
<br />5. These products described in this section may be cut into segments only through a cutting mark symbol provided on the LED
<br />strip.
<br />6. Units may be provided with UYMR2,3M type 4950 double-sided adhesive tape. Tape must be utilized per UYMR2
<br />"Conditions of Use" as defined in the Sign Components Manual.
<br />7. Mounting Clips may be used on walls, pillars doorframes or the like places.
<br />LED Modules, Component Sign Accessories, Class 2 Powered LED Module, Cat. No. LP-PIXDOT-030-5V or LS-DIA34-5V-
<br />M, where each Cat. No. may be optionally followed by a letter from A to Z or by a number from 0 to 9.
<br />1. These products are only suitable for connection to a Class 2 power source, rated 12 Volt DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited circuit.
<br />3. Class 2 Powered LED Module, cat. no. LP-PIXDOT-030-5V or LS-DIA34-5\AM is each rated max. 3.6 Watts per unit. When
<br />units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of
<br />the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />NEON TECH
<br />1965 PLAZA REAL
<br />OCEANSIDE, CA 92056
<br />E307713
|