|
June 19,, 2013 SIGN COMPONENTS MANUAL (SAM) 46
<br />4. These power units ate intended for dry or damp location use only.
<br />5. Strain Relief and Impact Tests have not been investigated. The suitability of the enclosure as ultimate enclosure shall be
<br />determined in the end-use application.
<br />6. The polymeric enclosure of each unit has not been evaluated as ultimate enclosure. The flame class of polymeric enclosure of
<br />each unit is V-0 for Models Tl UNV012V-40C, Tl UNVO 13\/-40C, and V-2 for Models Tl UNV024\/=40C, Tl UNV1000-36C,
<br />Tl UNV 1400-33C, and the necessity of additional fire barriers shall be determined in end product.
<br />7. In the end product, power supply spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls,
<br />and minimum 2 inches spacing to top of enclosure.
<br />/FULHAM ELECTRONIC CO LTD E349510
<br />CHANGPING SCIENCE PARK
<br />9 XINGCHANG RD
<br />NANSHAOYUAN AREA
<br />102200 BEIJING, CHINA
<br />LED Driver with Class 2 Output, Models TTUNV012\/-60L, Tl 120012\ABOL, BL-120-12-60, Tl UNV01.2V-60LA, BL-120-277-12-
<br />60.
<br />1. These products are to be used in maximum 50°C ambient.
<br />2. These products are provided with Class 2 output.
<br />3. These products are intended for used in a maximum 20 A branch circuit.
<br />4. These products are intended for use in dry and damp locations only.
<br />5. These models are provided vwth 18 AWG input and output leads. The suitability of the wire shall be considered in ehd product
<br />ose.
<br />6. These LED drivers shall be grounded through its mounting ears when used in end products.
<br />7. These LED drivers are to be used in fixed wiring equipment only.
<br />8. In the end product, LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls, and
<br />minimum 2 inches spacing to top of enclosure.
<br />9. In the end product, LED Drivers shall be located not less than 1 inch (25.4 mrn) apart when arranged end-to-end, and not less
<br />than 4 inches (102 min) apart when arranged otherwise.
<br />LED Driver with Class 2 Output, Models Tl UNV024\/-100LS, Tl UNV030V-100LS, Tl UNV024\660L.
<br />1, When used in end product, the maximum temperature on case surface shall not exceed the temperature note as below:
<br />Model No.Degree,°C Tested ambient, °C
<br />Tl UNV024V-100LS 89 60
<br />Tl UNV030V-100LS 88 60
<br />Tl UNV024\/-60L 90 60
<br />2. These products are provided wjth Class 2 output.
<br />3. These products are intended for used in a maximum 20 A branch circuit.
<br />4. These products are intended for use in dry and damp locations only.
<br />5. These models are provided with No. 18 AWG input and min. No 22 AWG output leads. The suitability of the wire shall be
<br />considered in end product use.
<br />6. These LED drivers shall be grounded through its mounting iears when used in end products.
<br />7. These LED drivers are to be used in fixed wiring equipment only.
<br />8. In the end product, LED driver spacing to other heat producing components shall be minimom 2 inches spacing to sidewalls, and
<br />minimum 2 inches spacing to top of enclosure.
<br />9. In the end product, LED Drivers shall be located not less than 1 inch (25.4 mrn) apart when arranged end-to-end, and not less
<br />than 4 inches (102mm) apart when arranged otherwise.
<br />LED Driver with Class 2 Output, Models Tl UNV012V-60LB, BL-120-277-12-60W, T1 UNV012\/-60LD.
<br />1. When used in end product, the maximum temperature on case surface shall not exceed the temperature note as below:
<br />Model No.Degree, °C Tested ambient, °C
<br />Tl UNV012V-60LB,
<br />BL--120-277-12-60W, 90 60
<br />Tl UNV012\660LD
<br />2. These products are provided with Class 2 output.
<br />3. These products are intended for used in a maximum 20 A branch circuit.
<br />4. These products are intended for use in wet location.
<br />5. These models are provided with No. 18 AWG input leads, R/C (AVL\/2, AVL\/8), AWM type, and No. 18 AWG output cable,
<br />listed (QPTZ, CN), PLTC type. The suitability of the wire shall be considered in end product use.
<br />6. These LED drivers shall be grounded through its mounting ears when used in end products.
<br />7. These LED drivers are to be used in fixed wiring equipment only.
<br />8. In the end product, LED driver spacing to other heat producing components shall be minimum 2 inches spacing to sidewalls,
<br />and minimum 2 inches spacing to top of enclosure.
<br />9. In the end product; LED Drivers shall be located not less than 1 inch (25.4mm) apart when arranged end-to-end, and not less
<br />than 4 inches (102mm) apan when arranged otherwise.
<br />10. These LED drivers have been evaluated using resistive load resulting iii the electrical input and output noted below.
<br />Mede Input (V, Amax)Output (loaded)
<br />Tl UNV012\+60LB,100-277 Vac, 0 708 -0.268 A 11.47 V, 5.0 A
<br />BL-120-277-12-60\N,
<br />Tl UNV012V-60LD
<br />LED Driver with Class 2 Output, Models T1 Ml UNV012V-20L, Tl UNV012V-20L1 Tl UNV024V-20L, Tl MTUNV024\620L,
<br />T4N4UN\hoc<x-100K, T4N4UN\hooo-1008, T4N4UNVxxxV-l OOK, T4NAUNVxxx\/-1008.
<br />1.These LED drivers have been evaluated using a resistive load resulting in the electrical rating below.
|