Laserfiche WebLink
47 SIGN COMPONENTS MANUAL (SAM)June 19,2013 <br />Model No.Input V, Ampere Loaded Output <br />(V dc, Ampere) x Channel number <br />Tl UNV012V-20L 100/120/240/277,12.25,1.670250/0 207/0.T08/0.092 <br />Tl Ml UNV012\A20L 100/120/240/277,12.09,1.670.251/0.207/0.108/0.094 <br />Tl UNV024V-20L 100/120/240/277,23.70,0.835 <br />0.238/0.196/0.101/0.085 <br />T1 Ml UNV024\/-20L 100/120/240/277,23.70,0.8350 244/0.203/0.103/0.088 <br /><2. These drivers'havei been tested in the ambient temperature. When used in end product, the maximum fempetature on case <br />surface shall not exceed the temperature note as below: <br />Model No.Tc (IC) 1 Ta (Tested ambient, RC) <br />Tl U NV012\/- 20L, Tl M 1 UNV01 2\620L,90 I 715 <br />T l UNV024V-20L, T 1 M l UNV024V-20L <br />3. These dri,vers with metallic housing or display/keys are to be used in the suitable end product fire enclosure. <br />4. These products are intended for used in a maximum 20 A branch circuit. <br />5. These products are intended foriuse in dry and damp locations. <br />6. These LED drivers shall be grounded through its mounting ears when used in end product. <br />FUTUREMEDIA DISPLAYS INC E316529 <br />#800 2120 HUTTON DR <br />CARROLLTON, TX 75006 <br />Sign Fan Cooling System, Series FMCPX-N Fan Cooling System, where X may be blank, 1,2,3 or 4 and N may be 1,2, 3 or 4. <br />1. These components should be installed in accordance with the manufatturer's instructions. <br />2, These devices are to be used in accordance with the ratings and <br />- ..leatt'yes as specified below. <br />; (Input-Output) Operating Voltage (V) <br />ICatalog Number Input (AC) | Output (DC) Max Output Current (rms) Type Load <br />FMCPX-N Fan Cooling System 100-240 |. 12 .5 .. .. . Fans <br />3. These components are not provided with a suitable enclosure or sign body. The need for a suitable electrical enclosure and <br />mechanical mounting means shall be considered in the end product. <br />4. No testing has been conducted on these units. The need to conduct Input, Temperature, Dielectric Voltage Withstand, and <br />Grounding Continuity tests shall be considered in the end product. The need for additional testihg shall also be considered in the. <br />end product. <br />5. The need for suitable strain relief of the internal wiring due to potential user servicing shall be considered in the end product. <br />G E LIGHTING ISRAEL LTD E242790 <br />5 HAMELACHA ST. <br />NORTHERN INDUSTRIAL ZONE <br />71520 LOD, ISRAEL <br />Class 2 Power Supply, Models LET-60, LED 25'·8\4 LED 25 12V, LED 25 24V, LED 10CV 12, LED 10CV 12 PU, LED 10CV 24, <br />LED l OCV PU, LED 1 OCC 350, LED l OCC 350 PU. <br />1. The electrical ratings are as follows: <br />Input, 60 Hz Output, ac <br />Model V A V A VA or Pmax <br />LET-60 120 0.6 12 5.0 60 VA <br />LED 25 8V 85-277 0.11-0.3 8 3.0 25 Pmax <br />LED 25 12V 85-277 0.11-0.3 12 2.0 25 Pmax <br />LED 25 24V 85-277 0.11-0.3 24 1.0 25 Pmax <br />LED 25 8V 85-277 0.11-0.3:8 3.0 25 Pmax <br />LED 25 12V 85-277 0.11-0.3 12 2.0 25 Prhax <br />LED 25 24V 85-·277 0.11-0.3 24 1.0 25 Pmax <br />LED 10CV 12,120-240 0.175-0.120 12 0.833 10 VA <br />LED 1 OCV 12 PU <br />LED 10CV 24,120-240 0.175-0.120 24 0.417 10 VA <br />LED 10CV 24 PU <br />LED 10CC 350,120-240 0.175-0.120 2.3-28 0.350 10 VA <br />LED l OCC 350 PU <br />2. These power supplies have been evaluated to Class 2 output requirements for dc circuits with a maximum of one Class 2 <br />output. <br />3. A suitable Fire and Electrical Enclosure shall be previded in the end product. <br />4. In the end product, power supply spacing to other heat producing <br />components shall be minimum 2 inches spacing to sidewalls, and minimum 2 inches spacing to top of enclosure. <br />5. These power supplies are only suitable for use in dry and damp locations.