10180014_4426 W. 1ST - Plan (2) - Laserfiche WebLink

Home Browse Search

113 SIGN COMPONENTS MANUAL (SAM)October 1, 2013 Photocell, Model PL746-TPC ·Photocell" 1. These products are only suitable for connection to a UL Listed or Recognized Class 2, 12 volt DC power source. 2. These products have not been evaluated for use When connected to a power source that does not comply with Class 2 voltage and energy limited supplies. 3. Class 2 LED Illumination, "Photocell" PL746-TPC is rated max. 60 Watts per unit. When units are connected to a Class 2 circuit: they are not to draw a total wattage of greater than the secondary or output rating ofthe Class 2 supply and 60 watts per Class 2 circuit. 4. These products are suitable for use in dry, damp and wet locations. 5. These products are not required to be enclosed or protected from weather. Class 2 LED Illumination. Cat. No. 780 or PCSK01. 1. These products are only suitable for connection to a UL Listed or Recognized Class 2,15 Voltor less DC power source. 2. These products have not been evaluated for uselwhen connected to a power s0urce that does not comply with Class 2 voltage and energy limited supplies. 3. Class 2 LED Illumination, 780 or PCSK01 Series, Palette Light and Palette Light Mini are each rated max. 0.78 Watts per unit. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply and 60; watts per Class 2 circuit. 4. These products are suitable for use in dry, damp andiwet locations. 5. These products are not required to be enclosed or protected from weather. Class 2 LED Illumination, Model No Elblanco/Delta Light PML900 Series. 1. These products are only suitable for connection to a UL Listed or Recognized Class 2, 15 Volt or less DC power source. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and ehergy limited supplies. 3. Class 2 LED Illumination, "Elblanco/Delta Light" PML900 Series are each rated max. 10 Watts per unit. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply and 60 watts per Class 2 circuit. 4. These products are suitable for use in dry, damp and wet locations. 5. These products are not required to be enclosed or protected from weather. Class 2 LED Illumination Module, Cat Nos. "PZ" or POSC01, "AB", PCSC02 or PCSC03 or 727-XXX Series, where XXX may be any alphanumeric characters 1. These products are only suitable for connection to a Class 2 power source, rated 12 Volt or less. 2. These products have not been evaluated for use when connected to a power source thht does not comply with Class 2 voltage and energy limited circujt and which is rated greater than 12 V. 3. Class 2 LED Modules are rated max. 1.5 Watts per unit. When units are connected te a Class 2 circuit, they am not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 V or less. 5. These products are not required to be enclosed or protected from the weather in the end product. Class 2 LED Illumination, Model No. 737 ("Twister Nano"), 747 ("el Plato"), 753 ("Twister STAR"), 777 ("Twister Nitro"), 787 ("Twister Halo") Series. All catalogue numbers may be followed by WWXYZ; where WW may be replaced with any letters of alphabet AA through ZZ; X may be replaced with any letter of alphabet A through Z or may be left blank, Y may be replaced with any letters of alphabet A through Z or may be left blank and and Z may be replaced with any letters of alphabet A through Z or may be left blank. 1. These products are only suitable for connection to a Class 2 power source, rated 12 Volt or less. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limits and which is rated greater than 12 V. 3. Class 2 LED Modules, Cat. No. 737 ("Twister Nano"), 747 Cel Plato"), 753 0Twister STAR"), 777 (''Twister Nitro") and 787 ("Twistef Halo") series afe each rated max. 7.5 Watts per unit. When units are connected to a Class 2 circuit they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locati0ns with supply sources rated at 12 V or less. 5. These products are not required to be enclosed or protected from the weather in the end product. Class 2 LED Module, Designated As "Omnistar" or "PFSC2520" 1. These products are only suitable for connection to a Class 2 power source rated 12 V0lt DC or less. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limited circuit and which is rated greater than 12 V DC. 3. These products are each rated max. 0.9 watts per module. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. 7. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shall be·considered. Class 2 LED Module Designated As "Cayenne for Signs" or "PFS4820". 1. These products are only suitable for connection to ai Class 2 power source rated 12 Volt DC or less. 2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and energy limited circuit and which is rated greater than 12 V DC. 3. These products are each rated max. 1.2 watts per module. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply. 4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less. 5. These products are not required to be enclosed or protected from the weather in the end product. 6. These products may be secured in place in the end product by any means available. 7. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shall be considered. LED Class 2 Power Supply, Cat. Nos. 60-12D-A. 1. These power supplies have a maximum of one Class 2 output. The output of these power supplies has been evaluated to Class 2 Output requirements for dc circuits.