Laserfiche WebLink
CITY OF SANTA ANA <br />Planning and Building Agency <br />Substrate: 3/4 in. CDX wood roof simulation in field IFastener (60) #14-10 x 2 in. s rews Appro <br />FOR PERMIT ISSUANCE <br />Dynamic Strength Testing of Anchorage Connectors <br />Requirements per Manufacturer Established OSHA Anchor Testin <br />(Figure 1) <br />Master ID: <br />Date: <br />1. Determine drop height required to create a 3,600 lb. <br />Requirement <br />Sample <br />#2 <br />#3 <br />or 5,000 lb. test load. <br />#1 <br />2. Install anchorage connector according to manufac- <br />turer's instructions. <br />Tested to load (Ibs) <br />5,000 <br />5,000 <br />5,000 <br />Anchorage connector <br />withstands applied load? <br />Pass <br />Pass <br />Pass <br />3. Make sure that the anchorage connector is oriented <br />so that the test load is applied in the intended direc- <br />tion of use. <br />4. Release load. <br />COMPLIANT <br />Yes <br />Yes <br />Yes <br />Dynamic Strength Testing of Anchorage Connectors <br />Requirements per Manufacturer Established OSHA Anchor Testing <br />(Figure 2) <br />1. Determine drop height required to create a 3,500 lb. <br />Requirement <br />Sample <br />Sample <br />Sample <br />or 5,000 lb. test load. <br />#1 <br />#2 <br />#3 <br />2. Install anchorage connector according to manufac- <br />turer's instructions. <br />Tested to load (IlDs.) <br />5,000 <br />5,000 <br />5,000 <br />Anchorage connector <br />withstands applied load? <br />Pass <br />Pass <br />Pass <br />3. Make sure that the anchorage connector is oriented <br />so that the test load is applied in the intended direc- <br />tion of use. <br />4. Release load. <br />COMPLIANT <br />Yes <br />Yes <br />Yes <br />Figure 1 <br />s <br />Figure 2 <br />s <br />a <br />Page 2 of 3 <br />