Laserfiche WebLink
CITY OF SANTA ANA <br />Planning and Building Agency <br />u� <br />Hilt! PROMS Engineering 3.1.23 <br />www.hilti.com <br />Approved <br />PERMIT ISSUANCE <br />Company: Page: 1. — . <br />8 <br />Address: Specifier: Date: <br />Phone I Fax: ( E-Mail: <br />Design: Concrete - Oct 15, 2025 Date: 5 <br />Fastening point: <br />8 Remarks; Your Cooperation Duties <br />Any and all information and data contained in the Software concern solely the use of Hilti products and are based on the principles, formulas and <br />security regulations in accordance with Hilti's technical directions and operating, mounting and assembly instructions, etc., that must be strictly <br />complied with by the user. All figures contained therein are average figures, and therefore use -specific tests are to be conducted prior to using <br />the relevant Hilti product. The results of the calculations carried out by means of the Software are based essentially on the data you put in. <br />Therefore, you bear the sole responsibility for the absence of errors, the completeness and the relevance of the data to be put in by you. <br />Moreover, you bear sole responsibility for having the results of the calculation checked and cleared by an expert, particularly with regard to <br />compliance with applicable norms and permits, prior to using them for your specific facility. The Software serves only as an aid to interpret norms <br />and permits without any guarantee as to the absence of errors, the correctness and the relevance of the results or suitability for a specific <br />application. <br />• You must take all necessary and reasonable steps to prevent or limit damage caused by the Software. In particular, you must arrange for the <br />regular backup of programs and data and, if applicable, carry out the updates of the Software offered by Hilti on a regular basis. If you do not use <br />the AutoUpdate function of the Software, you must ensure that you are using the current and thus up-to-date version of the Software in each <br />case by carrying out manual updates via the Hilti Website. Hilti will not be liable for consequences, such as the recovery of lost or damaged data <br />or programs, arising from a culpable breach of duty by you. <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c) 2003-2025 Hilli AG, FL-9494 Schaan HIM is a registered Trademark of HIM AG, Schaan <br />i1.7 <br />