My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
10181086_934 S. GUNTHER - Plan (2)
PBA
>
Building
>
Plans
>
G
>
Gunther St
>
934 S Gunther St
>
10181086_934 S. GUNTHER - Plan (2)
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/4/2021 11:48:29 PM
Creation date
10/25/2020 9:52:02 PM
Metadata
Fields
Template:
Plan
Permit Number
10181086
Full Address
934 S Gunther St
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
40
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
M,215 Mjcroinverter" Quick lostal[Guide <br />e Attach the Microinverters to the PV Racking <br />a. Mark the approximate centers of each PV <br />module on the PV racking. See notes in <br />Step Details on back. <br />0 Dress the Cable <br />a. Attach the cabling to the rack using <br />cable clips or tie wraps. <br />b. Dress any excess cabling in loops so that <br />it does not contact the roof. <br />cable clip <br />SS> <br />release holes <br />Keep the drop <br />connector <br />release holes <br />b. Mount the microinverters under the PV module,clear and <br />away from rain and sun. Do not mount the accessible. <br />microinverter in a position that allows long-term <br />exposure to direct sunlight or i-n a vertical orientation <br />that allows water to collect in the DC connector <br />recess. <br />'. =15 -» FoF;.ef. 4.4=:,2 1.e.]M.d..1/ <br />c. Torque the microinverter fasteners as follows: <br />• 5Nm (45-50 in-lbs) for 6 mm (1/49 hardware <br />• 9Nm (80-85 in-lbs) for 8mm (5/167 hardware <br />0 Connect the Microinverters <br />a. Remove and discard the temporary shipping <br />cap from the cable connector and connect the <br />microinverteF. Listen for two clicks as the <br />connectors engage. <br />0 Ground the System <br />a. Route a continuous GEC (grounding electrode <br />conductor) through each of the microinverters to <br />the NEC-approved AC grounding electrode. <br />See notes in Step Details on back. <br />b. Torque each 10/32 grounding cleat screw to i <br />2 N m (20-25 in-lbs).---1 <br />2 -66///ibl.i/14i-7 <br />GEC- <br />#1*1- <br />#1//Ur--4 <br />b. Cover any unused connectors with sealing <br />caps. Listen for two clicks as the connectors <br />engage. See notes in Step Details on back. <br />e**#4 h <br />/ 9\ <br />yi UU},ul, ry <br />cleat <br />3¥-r-4.-3.--FREFF;9.--m-37¥Ef,m <br /> Do notiis€ slipping caps ta.cover <br />unuse¢ conriedtors. Theishippjng cap· i , <br />does.Ab©Drovicle ah,ailequate -, 4 <br />.i.....2.2--·6441topmental .6.4*k ..1- -5. r.·2 <br />0>
The URL can be used to link to this page
Your browser does not support the video tag.