Laserfiche WebLink
STATE OF CALIFORNIA <br />CERTIFICATE OF COMPLIANCE, SIGN LIGHTING <br />CEC-SLTG-1C (Revised 10/10)CALIFORNIA ENERGY COMMISSION <br />Certificate of Compliance (Sign Lighting)(Page 4 of 4)SLTG-le <br />Project Name:Date: <br />A=+: 4-uk.. A p.. 4-v,.. 4- 64 0 wes 41-/6-(01 <br />5. Specific Lighting Source Method o f Compliance <br />Certificate of Compliance and Field Inspection Energy Checklist <br />Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 4 of this <br />Certificate of Compliance if there are signs using the maximum allowed lighting power method of compliance) <br />A B C D <br />OFTIONAI, <br />ENERGY Specific light source used for <br />Symbol VERIFIED compliance <br />or Description label Shall include only lighting <br />Code (sce instructions technologies listed below <br />below)List all that apply4 <br />E <br />Field <br />Inspector <br />Check that <br />Sign <br />Complies. <br />4 <br />*i <br />*2 <br />S.1 ve <br />Mo..,-...>4-0 P- -1,6 0 <br />MON U Me.,4 0 P- 9,6 0 <br />0 0 <br />0 0 <br />0 0 <br />A Symbol or code used on the plans (when plans are required) anc other documents. <br />B A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents <br />C OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory-installed ENERGY VERIFIED label, confitming that <br />this sign complies with tile Section 148 of the California 2008 Title 24, Part 6 Standards, using tile Specific Lighting Source Method of <br />Compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by <br />Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards <br />Institute in accordance with ISOREC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection <br />program carried out by a Type A Inspection body in accordance with ISOREC 17020. For signs with such an ENERGY VERIFIED label, <br />column *D' is not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate compliance. An <br />ENERGY VERIFIED label is not needed for compliance. <br />Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies: <br />List all applicable numbers (1 through 10) that apply in column D above for each row. <br />1 High pressure sodium lamps <br />2 Pulse start or ceramic metal.halide lamps served by a ballast with 288% efficiency <br />3 Pulse start metal halide lamps that are 6 320 watts, are not 250 watt or 175 watt lamps, and are served by a ballast <br />with 2 80% efficiency <br />14 Neon or cold cathode lamps with transformer or power supply efficiency 2 75% with rated output current < 50 mA <br />5 Neon or cold cathode lamps with transformer or power supply efficiency 2 68% with rated output current 2 50 niA <br />D 6 Fluorescent lamps with a minimum color rendering index (CRI) of 80 <br />(Note: when using electronic ballasts for compliance, lamps with a CRI < 80 may be used) <br />7 Light emitting diodes (LEDs) with a power supply with 2 80% efficiency <br />Single voltage LED external power supplies designed to convert 120 volt AC input into lower voltage DC or AC <br />8 output, having a nameplate output power less than or equal to 250 watts, and certified to the Energy Commission as <br />complying with the applicable requirements of the Appliance Efficiency Regulations (Title 20) <br />9 Compact fluorescent lamps that do not contain a medium screw base sockets 0324/1326) <br />./0 Electronic ballasts with a fundamental output frequency 2 20 kHz <br />E This page doubles as a field inspection checklist. <br />Field Inspector Notes: <br />2008 Nonresidential Compliance Forms October 2010