Laserfiche WebLink
STATE OF CALIFORNIA <br />CERTIFICATE OF COMPLIANCE, SIGN LIGHTING <br />CEC-SLTGAC (Revised 10/10)CALIFORNIA ENERGY COMMISSION <br />Certificate of Compliance (Sign Lighting)(Page 2 of 4)SLTG-le <br />Project Name:Date: <br />La-4-:+Vie A par+M.24- N•*ce-4 4-/6-(4 <br />3. Mandatory Sign Lighting Controls <br />NOTES: <br />1. The same responsible person may instal[ both the sign lighting power and the sign lighting controls. or a dilTerent responsible <br />person may install the sign lighting controls than the responsible person installing the sign lighting power. <br />2. The Mandatory Measures (sign lighting controls) are requiredfor compliance with the sign lighting Standards. lf the person <br />responsible for installing the sign lighting power is not also responsible for the sign lighting controls, then the owner of the <br />sign, general contractor, or architect shall be responsible to have the sign lighting controls installed. <br />3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of <br />Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; <br />alternatively, the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance <br />Declaration Statement for the entire construction. <br />3a. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on page 1 of <br />4 on this SLTG-1 C shall complete Part 3a. Check Yes or No for all of the following statements: <br />1 I have responsibility for installing the sign lighting controls <br />O Yes, complete parts 3a and 3b ofthis form *No. complete part 3a of this form <br />2 There are no existing sign lighting controls and I will be installing compliant sign lighting controls <br />¤ Yes 11 No <br />3 There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls <br />0 Yes *No <br />There are existing sign lighting controls that do not comply with the applicable provision of §119 and §133 and I will be <br />4 installing compliant sign lighting controls <br />0 Yes 0610 <br />There are existing sign lighting controls that do not comply with the applicable provision of §119 and §133 and someone else <br />5 will be responsible to install compliant sign lighting controls <br />O Yes *No <br />3b. Mandatory Sign Lighting Controls <br />If the person signing the Certificate of Compliance Declaration Statement on page 1 of 4 of this SLTG- 1 C is responsible for <br />complying with the sign lighting control requirements, that person shall answer all of the following questions: <br />If there are construction documents, indicate where on the building plans the <br />mandatory measures (sign lighting control) note block can be located: <br />1 §133(3)1. All indoor sign lighting is controlled with an automatic time switch control that complies with the <br />applicable requirements of §119. <br />§133(a)1 and 2. All outdoor sign lighting is controlled with an automatic time switch control plus a photo <br />2 control, or an outdoor astronomical time switch, that comply with the applicable requirements of §119, <br />Exception to §133(a)2. Outdoor signs in tunnels or large covered areas that require illumination during <br />daylight hours. <br />§133(a)3. All outdoor signs are controlled with a dimmer that provides the abilitj, to automatically reduce <br />sign power by a minimum of 65 percent during nighttime hours. <br />Exception 1 to §133(a)3. Signs illuminated for less than one hour per day during daylight hours. <br />3 Exception 2 to §133(a)3. Outdoor signs in tunnels or large covered areas that require illumination during <br />daylight hours. <br />Exception 3 to §133(a)3. Only metal halide, high pressure sodium, cold cathode, or neon lamps used for <br />illuminating signs or parts of signs. <br />§133(a)4. An Electronic Message Center (EMC) having a new connected lighting power load greater than <br />15 kW has a control installed capable of reducing the lighting power by a minimum of 30 percent when <br />4 receiving a demand response signal that is sent out by the local utility. <br />Exception to §133(a)4. EMC re4uired by a health or life safety statue, ordinance, or regulation, including <br />bul not limited to exit signs and traffic signs. <br />Field Inspector Notes: <br />N4 <br />NA <br />0 <br />NA <br />N NA <br />X0 <br />Y NA <br />0001 <br />Y N N/A <br />O O X <br />Y NA <br />O X <br />2008 Nonresidential Compliance Forms October 2010 <br />0