10278331_1317 S. MAGNOLIA - Plan (2)

Home Browse Search

Prescriptive Certificate of Compliance: Residential Additions Site Address:£15 11 &4464 6/\ A , Enforcement Agency: CF-IR ADD (Page 2 of 5) Date: • 1 '*1,3 1. For Tag/lD indicate the identification name that matches the buildingplans. 2. Indicate the Assembly Name or type: Roof/Ceiling, Walls, Floors, Slabs, Crawl Space, Doors and etc...Indicate in column G the Frame material and Size: For Wood, Metal, Metal Buildings, Mass, enter 24 24 or etc. see JA4 for other possible frame type assemblies. 3. Enter the thickness for mass in inches or Spacing betweenframing members enter; 16"or 24"OC, or Other for all other assembly description such as Concrete Sandwich Panel, Spandrel Panel, Logs, Straw Bale Panel, and etc. 4. Based on the Climate Zone, enter the equivalent U-factorfound in JA4 Table based on the R-Value from Table 151-C 5. Enter the Table number that closely resembles the proposed assembly. 6. Enter the R-value thatis beinginstalled in thewallcavity or between theframing; otherwise, enter "0" 7. Enter the Continuous Insulation R-value for the proposed assembly; otherwise, enter 8. Enter the row and column of the U-factor value based on Column F Table Number and enter the Assembly U-factor in Column J, 9. The Proposed Assembly U-factor, Column J, must be equal to or less than the Standard U-factor in Column E to comply. FURRING STRIPS CONSTRUCTION TABLE FOR MASS WALLS ONLY A B C D E|F GHIJKL M Proposed Properties ofMasonry and Concrete Added Interior or Exterior Insulation Walls From Reference in Furring Space from Reference Joint Appendix Table 4.3.5,4.3.6,4.3.7 Joint Appendix Table 4.3.13 3 Assembly 1 =0 Mass Nameor JA4 Table 4 -3 Thickness'Typez Number'6> £ %5 € CS b E 5 2 U. : fi f 202 5> Final Assembly U-factor.7 Comment 1. Indicate the Mass Thickness from Reference Joint Appendix JA, 2. Indicate the Assembly Name or type: Roof/Ceiling, Walls, Floors, Slabs, Crawl Space, Doors and etc...Indicate the Frame type and Size: For Wood, Metal, Metal Buildings, Mass, enter 2x4,24 or etc... see JA4 for other possible frame type assemblies. 3. Enter the Table number that closely resembles the proposed assembly. 4. Enter the row and column of the U-factor value. 5. Enter the Effective R-value listed in the JA4 Table Number. 6. The Final Assembly is calculated by using Equation 4- 1 or Equation 4-4 ofthe Reference Joint Appendix JA4. Enter the value in Column L. 7. insert the Final Assembly U-factor value back on to the Opaque Surface Details table in Column J. FENESTRATION PROPOSED AREAS Orientation Fenestration Type and Frame (North, East,ProposedArea' Maximum Maximum NFRC or (Window, Glass Door or Skylight)South, West) (RD U-factoP' 3 SHGC2,3,4 Default Values5 w I Aptuj 4 2 4 AFfel GLAS. C 0062 A 3 76 Aplt L 4 l AO a U.1 e.C 2-Am e c \,4 \ Ap oub ¢ -1 6 AF n_c Total 97 1. Fenestration area is the area oftotal glazed product (i.e. glass plusframe). Exception: Whena door is less than 50% glass, thefenestration area may be the glass area plus a "2 inch frame" around the glass. 2. Enter valuefrom Component Package D Requirements in Table 151-C. 3. Actualfenestration products installed and as indicated in CF-6R-ENV Form shall be equivalent to or have a lower U-factor and/or a lower SHGC value than that specified on the Fenestration Proposed Area table above, 4. Submit a completed WS-3R Form if a reduced SHGC is calculated with exterior shading. 5. If applicableat this stage enter "NFRC"for NFRC Certified windows or CEC "Default" values found in Table ] 16-A or B. Registration Number: 2008 Residential Compliance Forms Registration Date/Time:HERS Provider: March 2010