10278331_1317 S. MAGNOLIA - Plan (2)

Home Browse Search

Prescriptive Certificate of Compliance: Residential Additions Site Address:13,1 MAGAdlt A CF-1R ADD (Page 3 of 5) Enforcement Agency:Date ADDITION ALLOWED FENESTRATION AREAS f2 FA B C D E CFA of Area Maximum ,Allowed %Allowed Area Proposed Area'Addition Removed2 Allowed Area (Table Above)itz of CFA (Ax B) ft2 (C + D) Total Fenestration Area3 4% b 020 9; /1./0 A z 97 West Fenestration Area'' 4 (Required In CZ's 2, 4&7 -15)th b 005 2 1 -e 2 j. West Fenestration Area includes west-sloping sicylights and any skylights with a pitch less than 1 : 12. 2. Glass removed to make wayfor the addition. 3. For additions less than ],000# the standards allows glazing removed during the remodet to be added to the glazing area allowance. The maximum allowed glazing area for the addition is the CFA x 20% + glass removed to make way for the addition. 4. In climate zones 2,4,7-15, no more than 5% ofthe CFA is allowed for west-facing glazingplus west-facing glass area removed to make way for theaddition. The maximum allowed west-facing glazing area is the CFA x 5% + west-facing glass removed to make wayfor theaddition. 5. To meet compliance, the Proposed Area must be less than or equal to the Total Allowed Areafor BOTH the Total and West Fenestration Areas. ROOFING PRODUCTS (COOL ROOFS)§151012 Check applicable box below if the roof addition is exempt from the roofing product "Cool Roof' requirements. Note: If any one of the boxes are checked below, the Aged Solar Reflectance and Thermal Emittance requirementsfor roojing products in §118(i) are not applicable. Do not fill table below. ¤ Roofing compliance Ngl Required in Climate Zones 1-12,14, and 16 with a Low-Sloped. Less or 2:12 pitch. 4pofing compliance Not Required in Climate Zones 1 through 9 and 16 with a Steep-Sloped. Roofs pitch greater than 2:12 and product weightless than 5lb/ff. ¤ Roofing area covered by building integrated; photovoltaic panels and solar thermal panels are exempt from the above Cool Roof criteria ¤ Roof constructions that have thermal mass over the roofmembrane with at least 25 lb/ff is exempt from the above Cool Roof criteria. Note: If no CRRC-1 label is available, this compliance method cannot be used, use the Performance Approach to show compliance, otherwise, check the applicable box below if Exempt from the Roofing Products "Cool Roof' Requirement: Roo f Slope Product Weight Product Aged Solar Thennal CRRC Product ID Number 5 2:12 >2:12 <5lb/ft? 2 5lb/f22 Typei Reftectance3,4 Emittance SRI5 0 0 0 0 04 0 0 0 0 04 0 0 [=1 0 04 0 [1 0 0 04 0000 04 0 0 0 04 1. The CRRC Product ID Number can be obtainedfrom the Cool Roof Rating Council 's Rated Product Directory at www.coolroofs.ore/products/search.php. 2. Indicate the type ofproduct is being usedfor the rooftop, i.e. single-pty roof, asphalt roof, metal roof, etc. 3 ifthe Aged Reflectance is not available in the Cool Roof Rating Council 's Rated Product Directory then use the Initial Reflectance value from the same directory and use the equation (0.2+0.7(pinmat- O.2) to obtainacalculated aged value. Where pis the Initial Solar Reflectance. 4. Check box ifthe Aged Reflectance is a calculated value using the equation above, 5. Calculate the SRI value by using the SRI- Worksheet at httl)://www.enerev.ca.Hov/title24/ and enter the resulting value in the SRI Column above and attach acopy of the SRI- Worksheet to the CF- 1 R To apply Liquid Field Applied Coatings, the coating must be applied across the entire roof surface and meet the dry mil thickness or coverage recommended by the coatings manufacturer and meet minimum performance requirements listed in §118(i)4. Select the applicable coating: O Aluminum-Pigmented Asphalt RoofCoating O Cement-Based Roof Coating O Other Registration Number: 2008 Residential Compliance Forms Registration Date/Time:HERS Provider: March 20 10