Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />PRODUCT REQUIREMENTS 01 6000 - 5 <br />ed. 2023-09-22 <br />a. Submit additional documentation required by Architect in order to establish <br />equivalency of proposed products. Evaluation of "or equal" product status is by the <br />Architect, whose determination is final. <br />B. Product Selection Procedures: <br />1. Sole Product: Where Specifications name a single manufacturer and product, provide the <br />named product that complies with requirements. Comparable products or substitutions for <br />Contractor's convenience will not be considered. <br />a. Sole product may be indicated by the phrase: "Subject to compliance with <br />requirements, provide the following: …" <br />2. Sole Manufacturer/Source: Where Specifications name a single manufacturer or source, <br />provide a product by the named manufacturer or source that complies with requirements. <br />Comparable products or substitutions for Contractor's convenience will not be <br />considered. <br />a. Sole manufacturer/source may be indicated by the phrase: "Subject to compliance <br />with requirements, provide products by the following: …" <br />3. Limited List of Products: Where Specifications include a list of names of both <br />manufacturers and products, provide one of the products listed that complies with <br />requirements. Comparable products or substitutions for Contractor's convenience will be <br />considered unless otherwise indicated. <br />a. Limited list of products may be indicated by the phrase: "Subject to compliance <br />with requirements, provide one of the following: …" <br />4. Limited List of Manufacturers: Where Specifications include a list of manufacturers' <br />names, provide a product by one of the manufacturers listed that complies with <br />requirements. Comparable products or substitutions for Contractor's convenience will be <br />considered unless otherwise indicated. <br />a. Limited list of manufacturers is indicated by the phrase: "Subject to compliance <br />with requirements, provide products by one of the following: …" <br />5. Basis-of-Design Product: Where Specifications name a product, or refer to a product <br />indicated on Drawings, and include a list of manufacturers, provide the specified or <br />indicated product or a comparable product by one of the other named manufacturers. <br />Drawings and Specifications indicate sizes, profiles, dimensions, and other characteristics <br />that are based on the product named. Comply with requirements in "Comparable <br />Products" Article for consideration of an unnamed product by one of the other named <br />manufacturers. <br />a. For approval of products by unnamed manufacturers, comply with requirements in <br />Section 01 2500 "Substitution Procedures" for substitutions for convenience.