Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />PRODUCT REQUIREMENTS 01 6000 - 4 <br />ed. 2023-09-22 <br />7. Provide a secure location and enclosure at Project site for storage of materials and <br />equipment by Owner's construction forces. Coordinate location with Landlord. <br />1.7 PRODUCT WARRANTIES <br />A. Warranties specified in other Sections shall be in addition to, and run concurrent with, other <br />warranties required by the Contract Documents. Manufacturer's disclaimers and limitations on <br />product warranties do not relieve Contractor of obligations under requirements of the Contract <br />Documents. <br />1. Manufacturer's Warranty: Written warranty furnished by individual manufacturer for a <br />particular product and specifically endorsed by manufacturer to Owner. <br />B. Special Warranties: Prepare a written document that contains appropriate terms and <br />identification, ready for execution. <br />1. Manufacturer's Standard Form: Modified to include Project-specific information and <br />properly executed. <br />2. Specified Form: When specified forms are included with the Specifications, prepare a <br />written document using indicated form properly executed. <br />3. See other Sections for specific content requirements and particular requirements for <br />submitting special warranties. <br />C. Submittal Time: Comply with requirements in Section 01 7700 "Closeout Procedures." <br />PART 2 - PRODUCTS <br />2.1 PRODUCT SELECTION PROCEDURES <br />A. General Product Requirements: Provide products that comply with the Contract Documents, are <br />undamaged and, unless otherwise indicated, are new at time of installation. <br />1. Provide products complete with accessories, trim, finish, fasteners, and other items <br />needed for a complete installation and indicated use and effect. <br />2. Standard Products: If available, and unless custom products or nonstandard options are <br />specified, provide standard products of types that have been produced and used <br />successfully in similar situations on other projects. <br />3. Owner reserves the right to limit selection to products with warranties meeting <br />requirements of the Contract Documents. <br />4. Where products are accompanied by the term "as selected," Architect will make <br />selection. <br />5. Descriptive, performance, and reference standard requirements in the Specifications <br />establish salient characteristics of products. <br />6. Or Equal: For products specified by name and accompanied by the term "or equal," or "or <br />approved equal," or "or approved," comply with requirements in "Comparable Products" <br />Article to obtain approval for use of an unnamed product.