Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS 08 4113 - 8 <br />ed. 2024-02-20 <br />D.Brackets and Reinforcements: Manufacturer's standard high-strength aluminum with nonstaining, <br />nonferrous shims for aligning system components. <br />E.Entrance Doors: Manufacturer's standard glazed entrance doors for manual-swing or automatic <br />operation. <br />1.Door Construction: 1-3/4-inch overall thickness, with minimum 0.125-inch-thick, extruded- <br />aluminum tubular rail and stile members. Mechanically fasten corners with reinforcing brackets <br />that are deeply penetrated and fillet welded or that incorporate concealed tie rods. <br />2.Door Design: Wide stile; 5-inch nominal width. <br />3.Glazing Stops and Gaskets: Square, snap-on, extruded-aluminum stops and preformed gaskets. <br />a.Provide nonremovable glazing stops on outside of door. <br />4.Finish: Match adjacent storefront framing finish. <br />2.5 ENTRANCE DOOR HARDWARE <br />A.Entrance Door Hardware: Hardware not specified in this Section is specified in Section 08 7100 "Door <br />Hardware." <br />B.Strikes: Provide strike with black-plastic dust box for each latch or lock bolt; fabricated for aluminum <br />framing. <br />C.Weather Stripping: Manufacturer's standard replaceable components. <br />1.Compression Type: Made of ASTM D2000 molded neoprene or ASTM D2287 molded PVC. <br />2.6 GLAZING <br />A.Glazing: Comply with Section 08 8000 "Glazing." <br />B.Glazing Gaskets: Manufacturer's standard sealed-corner pressure-glazing system of black, resilient <br />elastomeric glazing gaskets, setting blocks, and shims or spacers. <br />2.7 MATERIALS <br />A.Sheet and Plate: ASTM B209. <br />B.Extruded Bars, Rods, Profiles, and Tubes: ASTM B221. <br />C.Structural Profiles: ASTM B308/B308M. <br />D.Steel Reinforcement: