Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />DOOR HARDWARE 08 7100-10 <br />ed. 2023-10-12 <br />a. Provide levers that return to within 1/2 inch (13 mm) of door face. <br />b. Vandlgard: Provide levers with vandal resistant technology for use at heavy traffic or <br />abusive applications. <br />c. Lever Design: RHO <br />2.06 CYLINDERS [VERIFY] <br />A. Manufacturers and Products: <br />1. Scheduled Manufacturer and Product: <br />a. Schlage Everest 29 S <br />B. Requirements: <br />1. Provide cylinders/cores compliant with ANSI/BHMA A156.5; latest revision; cylinder <br />face finished to match lockset; manufacturer’s series as indicated. Refer to “KEYING” <br />article, herein. <br />2. Provide cylinders in the below-listed configuration(s), distributed throughout the Project <br />as indicated. <br />a. Patented Open: cylinder with permanent core with open keyway. <br />b. Patented Open: cylinder with interchangeable core with open keyway. <br />3. Patent Protection: Cylinders/cores requiring use of restricted, patented keys, patent <br />protected. <br />4. Nickel silver bottom pins. <br />2.07 KEYING [VERIFY] <br />A. Scheduled System: <br />1. New factory registered system: <br />a. Provide a factory registered keying system, complying with guidelines in <br />ANSI/BHMA A156.28, incorporating decisions made at keying conference. <br />2. Existing factory registered system: <br />a. Provide cylinders/cores keyed into Owner’s existing factory registered keying <br />system. Comply with guidelines in ANSI/BHMA A156.28, incorporating decisions <br />made at keying conference. <br />3. Existing non-factory registered system: