Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />EXTERIOR PAINTING 09 9113 - 2 <br />2.Indicate VOC content. <br />B.Samples for Verification: For each type of paint system and each color and gloss of topcoat. <br />1.Submit Samples on rigid backing, 8 inches square. <br />2.Apply coats on Samples in steps to show each coat required for system. <br />3.Label each coat of each Sample. <br />4.Label each Sample for location and application area. <br />C.Product List: Cross-reference to paint system and locations of application areas. Use same designations <br />indicated on Drawings and in schedules. Include color designations. <br />1.5 DELIVERY, STORAGE, AND HANDLING <br />A.Store materials not in use in tightly covered containers in well-ventilated areas with ambient temperatures <br />continuously maintained at not less than 45 deg F. <br />1.Maintain containers in clean condition, free of foreign materials and residue. <br />2.Remove rags and waste from storage areas daily. <br />1.6 FIELD CONDITIONS <br />A.Apply paints only when temperature of surfaces to be painted and ambient air temperatures are between 50 and <br />95 deg F. <br />B.Do not apply paints in snow, rain, fog, or mist; when relative humidity exceeds 85 percent; at temperatures less <br />than 5 deg F above the dew point; or to damp or wet surfaces. <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A.Manufacturers: Subject to compliance with requirements, available manufacturers offering products that may be <br />incorporated into the Work include, but are not limited to the following: <br />1.Benjamin Moore & Co. <br />2.Sherwin-Williams Company (The). <br />2.2 PAINT, GENERAL <br />A.MPI Standards: Products shall comply with MPI standards indicated and shall be listed in its "MPI Approved <br />Products Lists." <br />B.Material Compatibility: