Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />1.American National Standard Institute (ANSI) <br />2.American Society for Testing Materials (ASTM) <br />3.American Society of Mechanical Engineers (ASME) <br />4.American Water Works Association (AWWA) <br />5.Air Moving and Condition Association, Inc. (AMCA) <br />6.National Electrical Manufacturer’s Association (NEMA) <br />7.ANSI Code of Pressure Piping and Unfired Pressure Vessels <br />8.Cast Iron Soil Pipe Institute <br />9.Occupational Safety and Health Acts (OSHA) <br />10.Most Current Applicable State Mechanical Code <br />11.Most Current Applicable State Building Code <br />1.4 DEFINITIONS <br />A.Finished Spaces: Spaces other than mechanical and electrical equipment rooms, furred spaces, <br />pipe and duct chases, unheated spaces immediately below roof, spaces above ceilings, <br />unexcavated spaces, crawlspaces, and tunnels. <br />B.Exposed, Interior Installations: Exposed to view indoors. Examples include finished occupied <br />spaces and mechanical equipment rooms. <br />C.Exposed, Exterior Installations: Exposed to view outdoors or subject to outdoor ambient <br />temperatures and weather conditions. Examples include rooftop locations. <br />D.Concealed, Interior Installations: Concealed from view and protected from physical contact by <br />building occupants. Examples include above ceilings and chases. <br />E.Concealed, Exterior Installations: Concealed from view and protected from weather conditions <br />and physical contact by building occupants but subject to outdoor ambient temperatures. <br />Examples include installations within unheated shelters. <br />F.The following are industry abbreviations for rubber materials: <br />1.EPDM: Ethylene-propylene-diene terpolymer rubber. <br />2.NBR: Acrylonitrile-butadiene rubber. <br />1.5 SUBMITTALS <br />A.Product Data: For the following: <br />1.Transition fittings. <br />2.Dielectric fittings. <br />3.Mechanical sleeve seals. <br />4.Escutcheons. <br />B.Welding certificates.