Laserfiche WebLink
Round 1 Bowling and Amusement 12/09/2024 Paradigm Design <br />Main Place Mall Expansion Grand Rapids, MI <br />Santa Ana, California <br />Project #2309147GR <br />PART 2 - PRODUCTS <br />2.1 EQUIPMENT LABELS <br />A.Metal Labels for Equipment: <br />1.Material and Thickness: Brass, 0.032-inch, Stainless steel, 0.025-inch, Aluminum, <br />0.032-inch, or anodized aluminum, 0.032-inch minimum thickness, and having predrilled <br />or stamped holes for attachment hardware. <br />2.Minimum Label Size: Length and width vary for required label content, but not less than <br />2-1/2 by 3/4 inch. <br />3.Minimum Letter Size: 1/4 inch for name of units if viewing distance is less than 24 <br />inches, 1/2 inch for viewing distances up to 72 inches, and proportionately larger lettering <br />for greater viewing distances. Include secondary lettering two-thirds to three-fourths the <br />size of principal lettering. <br />4.Fasteners: Stainless-steel rivets or self-tapping screws. <br />5.Adhesive: Contact-type permanent adhesive, compatible with label and with substrate. <br />B.Plastic Labels for Equipment: <br />1.Material and Thickness: Multilayer, multicolor, plastic labels for mechanical engraving, <br />1/8 inch thick, and having predrilled holes for attachment hardware. <br />2.Maximum Temperature: Able to withstand temperatures up to 160 deg F. <br />3.Minimum Label Size: Length and width vary for required label content, but not less than <br />2-1/2 by 3/4 inch. <br />4.Minimum Letter Size: 1/4 inch for name of units if viewing distance is less than 24 <br />inches, 1/2 inch for viewing distances up to 72 inches, and proportionately larger lettering <br />for greater viewing distances. Include secondary lettering two-thirds to three-fourths the <br />size of principal lettering. <br />5.Fasteners: Stainless-steel rivets or self-tapping screws. <br />C.Label Content: Include equipment's Drawing designation or unique equipment number, <br />Drawing numbers where equipment is indicated (plans, details, and schedules), plus the <br />Specification Section number and title where equipment is specified. <br />D.Equipment Label Schedule: For each item of equipment to be labeled, on 8-1/2-by-11-inch <br />bond paper. Tabulate equipment identification number and identify Drawing numbers where <br />equipment is indicated (plans, details, and schedules), plus the Specification Section number <br />and title where equipment is specified. Equipment schedule shall be included in operation and <br />maintenance data. <br />2.2 WARNING SIGNS AND LABELS <br />A.Material and Thickness: Multilayer, multicolor, plastic labels for mechanical engraving, 1/8 <br />inch thick, and having predrilled holes for attachment hardware. <br />B.Maximum Temperature: Able to withstand temperatures up to 160 deg F.